horizontal used for sale

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Max diam 250 , max lenght 2000, 3 x heads , change gears

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 30 m³ Dimensions: Ø 2.50 m × 6.60 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Mimi Tight Banding Banding Bundle Packer Packaging Machine is in stock and ready for immediate use

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 18 - 110 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Ref. -No.: 10342 Manufacturer: STARRAG HECKERT Year of construction: 2015 Type of control: CNC Control: Fanuc Series 16i Storage location: Halberstadt Country of origin: Schweiz Serial no.: 12217 X-Travel: 1000 mm Y-Travel: 910 mm Z-Travel: 835 mm Distance spindle center - table: 100 mm Table Dimensions (Lengthxwidth): 630 x 800 mm Table Load: 1250 kg Max. Tool Length: 600 mm Max. Tool Diameter: 500 mm Tool Taper: HSK-A 100 Numbers Of Tools In Magazin: 240 Spindle Speed: 20 - 6000 RPM Feed Capacities X/Y/Z: 20.000 N Rapid Traverse: 40 m / min Internal cooling: 30/40/50 bar External cooling: 2 bar

Ref. -No.: 10335 Manufacturer: HÜLLER HILLE Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPM Rapid Traverse: 60 m / min Further information: Coolant system = 1250 l

Ref. -No.: 10022 Manufacturer: UNION Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001

Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW

Key data: 400 mm, 700 mm, 400 mm

Inv. Num. : 6723 Type: BA400-2 Producer: SW Created: 2004 Parameters: Control system: Siemens - Sinumerik 840D Maximum spindle speed: 17500 1/min Tool magazine: 120 pieces X-axis travel: 400 mm Y-axis travel: 700 mm Z-axis travel: 400 mm Cone: HSK63 Equipment: IKZ High Pressure Pump Filtration Knoll Preparation for 5 axis

BAR LATHE MIYANO BNJ 42S :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iT - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 42mm Number of main spindle revolutions: 5000 - Number of tool holders: 2 - Number of first turret tool positions: 8 - Number of first turret motorized units: 8 First Turret X-Axis Travel: 142mm First Turret Z-Axis Travel: 250mm Number of second turret tool slots: 3 Number of fixed tool positions for the second turret: 3 Sub-spindle: yes Sub-spindle speed: 5000 Power against spindle: 5.5Kw Bar clearance: 42mm Z stroke counter spindle : 250mm Bar feeder model and brand: LNS Hydrobar Mini Sprint Chip conveyor: belt conveyor Number of live tool holders supplied: 2 :::D DIMENSIONS AND WEIGHT::: Length: 2700mm Width: 1450mm Height: 1720mm Weight: 4600Kg

Key data: 1010 mm, 800 mm, 1010 mm

Inv. Num. : 6942 Type: H63 Producer: ZPS Created: 2005 Parameters: Control system: Siemens Work table length: 800 mm Work table width: 630 mm X-axis travel: 1010 mm Y-axis travel: 800 mm Z-axis travel: 1010 mm

TOS W 75

Brand: GME Triulzi Type: Washing Machine Horizontal Length mm: 6000 Width mm: 3800 Height mm: 5500 Transport size L x W x H: 6,0 x 3,8 x 1,4 Number of brushes: 4 brushes Condition machine : Working disassembled Remaining: Combi with: GME Bavelloni 2x Double Edger (23010)

BFT 90/3 SPINDEL 102 , ISO

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Chassis number: 416-87 Weight: 1,5 tons Length mm: 4000 Width mm: 2000 Height mm: 1300 Transport size L x W x H: 4,0 x 2,0 x 1,3 Min.-max glass size: min 100mm / max. 1250mm Condition machine : Working - For more information, please mail us: salestecfort.nl

Nakamura WTS 150 Y2 Bar Lathe :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 16i - T Main Spindle Nose: ASA 5 Main spindle power: 7.5Kw Main spindle bar clearance: 42mm Turning diameter: 310mm Turning Length: 255mm Main spindle speed: 6000 Number of Tool Turrets: 3 Number of first turret tool slots: 12 Number of first turret motors: 12 First Turret X-Axis Travel: 207.5mm First Turret Y-Axis Travel: +-30mm First Turret Z-Axis Travel: 300mm Number of second turret tool slots: 12 Number of second turret motors: 12 Second Turret X-Axis Travel: 207.5mm Second Turret Y-Axis Travel: +- 30mm Second Turret Z-Axis Travel: 300mm Number of third turret tool slots: 12 Number of third turret motors: 12 Third Turret X-Axis Travel: 207.5mm Third Turret Z-Axis Travel: 800mm Rapid feeds for linear axes X Y Z: 40m/min High refr ...

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

HELLER MC16 4-axis horizontal milling center YOM 2000 4-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D Longitudinal X-axis 630 mm Vertical Y-axis 630 mm Cross Z-axis 630 mm NC rotary table Tilting B axis 360.000 x 0,001 ° Pallet size 400 x 500 mm Max. workpiece size Ø x height 720 x 800 mm Max. workpiece weight 500 kg Pallet exchange time 9 sec. Turning Speed B axis 40 rpm/min Tool holder cone HSK 63 Tool size Ø x lg. x weight 150 x 227 x 12 mm/kg Spindle speeds, infinitely variable 45 – 24,000 rpm Feeds / quick feeds XYZ: 1 – 60,000 mm/min Feed force 10.000 nm Spindel torque 48/72 nm Spindle drive 30 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Total weight 12.5 tons Accessories / Special Features : -Separate standing 80 position Rack-Type tool Magazine with tool placement door and double Swivel gripper, own SIEMENS PC-Control with screen To ...

horizontal aluminium tank with 2 consoles Volume: 15 m³ Dimensions: Ø 1.90 x 5.80 m long

horizontal stainless steel tank, can be ordered with 6 brackets Volume; 85 m³ Dimensions: Ø 3.10 × 12.0 m long

horizontal stainless steel tank, double-walled, insulated, oval, with feet Volume: 5.2 m³ Dimensions: Ø 2.05 m wide × 2.80 m long x 1.80 m high incl. feet

horizontal stainless steel tank, oval, with feet Volume: 2.3 m³ Dimensions: 0.70 m wide x 2.30 m long x 1.50 m high and 0.20 m high feet, total height 1.70 m

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m

Key data: 6000 , 4100 , 800

Gantry/Bridge Mill Make: Okuma Model: MCR-A5CII Year: 2015 Machine Location: Upon Request Additional Specifications Available Upon Request Travels: X: 263.78″ (Table Front/Back) Y: 161.42″ (Spindlehead Horizontal) Z: 31.50″ (Ram Vertical) W: 47.24″ (Crossrail Vertical) Effective Width Between Columns: 143.70″ Table to Spindle Nose: 0″ to 70.87″ Table: 118.1″ x 255.9″ (3000 mm x 6500 mm) Max. Load: 81,400lbs T-Slots: 24H7 Width x 15# Spindle: 30 to 6,000 30 to 10,000 7/24 Taper No. 50 ATC Equipped With Accessories: -Main motor and standard electricals: 30 to 4,000 min-1 -Spindle cooler: Oil controller -Thermo-Friendly specs: TAS-S, TAS-T -Synchronized W axis NC (NC crossrail): Absoscale detection (W axis) -Auto Tool changer: 50 tools -ATC air blower and spindle air curtain: Air blower (blast) -Seesaw pendant operation panel: Vertical travel ...

Machine-Details Stock-No. 1105-04009 Type of machine Machining Center - Horizontal Make MORI SEIKI Type MH 50 Year of manufacture 1993 Type of control CNC Storage location FRANKREICH Country of origin Japan Delivery time stock Freight basis ex. location Technical details X-Travel 710 mm Y-Travel 600 mm Z-Travel 600/730 mm FANUC 16 M control power capacity - milling spindle 22 kW Spindle Turning Speed - Stepless 13000 1/min numbers of tools in magazin 120 BT 50 size of pallet 500 x 500 mm max. workpiece diameter on pallets 580 mm workpiece height max. 740 mm B-axis (table) 360000° X/Y/Z -STEPLESS feeds 24 mm/min Rapid Travel X/Y/Z 24000 mm/min total power requirement 35 kVA weight of the machine ca. 17 t dimensions of the machine ca. 3.9 x 3.4 x 2.6 m Accessories Chip conveyor Additional information NICE MACHINE - 2 pallets 500 X 500 360000° PALLET IND ...

Key data: 1400 mm, 1200 mm, 1350 mm

A horizontal machining center from the manufacturer Mori Seiki NH 8000 DCG is offered here. The machine is in good condition and can be visited. Make: Mori Seiki Huzvdlw Type: NH 8000 DCG Year of Make: 2008 Control: Fanuc MSX-701III Specifications: Travel: X-axis 1400 mm Y-axis 1200 mm Z-axis 1350 mm B-axis rotary table 360x0.001° automaton. Tool changer with 60 tool positions Tool holder HSK 100 2-fold pallet changing system Pallet dimensions 800 mm x 800 mm max. tool length 800 mm max. tool weight 30 kg Spindle power 37 KW Max. spindle speed 8000rpm. IKZ cooling system

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

Horizontal flow wrapper suitable for feeding and sealing blisters (two blister per flow bag) from the magazine into corresponding flow bags. Machine incl. code reader LAETUS type Argus 6012, image processing system UHLMANN type Visioread Colour, preparation for printer MARKEM type SmartDate X40, PLC SIEMENS Simatic S7-300, spare parts, etc. Output: up to 170 packages/min

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von buerstlein Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen zirlguss Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwa ...

Conveyor with modular belt, stopband, stopwatch with dimensions: tape width 510 mm Tape length 1800 mm SEW geared motor with brake 075 kW, 1380/42 rpm Self-collection in the area: Kędzierzyn-Koźle, Opole Voivodeship or by arrangement. This product is in stock. Joanna Multi-Industry Company + 77 482 44 99

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

Key data: 7300 mm, 1000 mm, 650 mm

- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining

Mori Seiki NL 2000 SY 500 MOTORIZED LATHE :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX 850 Main spindle nose: ASA 6 Main spindle power: 15Kw Main spindle bar passage: 65mm Turning diameter: 275mm Turning length: 510mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 590mm Fast feeds linear axes X Y Z: X 30 / Y 10 / Z 30m/min Sub-spindle: yes Spindle nose: ASA 5 Number of counter-spindle speeds: 6000 Counter spindle power: 7.5Kw Bar Passage: 43mm Z stroke sub-spindle : 625mm Model and brand bar loader: Iemca Master 880 MP-E Chip conveyor: belt Presetting: yes Machine equipment: Extensive machi ...

cutting width: 250 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

Packaging machine BVM Compacta 5022 EMS; overhauled by BVM customer service; Welding width 500mm; Passage height 220mm; Conveyor belt approx. 3m with seesaw belt; Shrink tunnel SC 4530SD with plastic link belt and water cooling; Discharge belt 2m not overhauled is free of charge; 2 machines available. Packaging machine BVM Compacta 5022 EMS; rebuilt by the support of BVM; sealing width 500mm; hight 220mm; infeed belt 3m with rocker band; shrink tunnel SC 4530 SD with plastic band and water cooling unit; outfeed belt 2m for free but not rebuilt; two machines on stock.

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Used machine in good condition. Available for immediate delivery. - Power source : 80 kVA - Axes: 5 - Control: SIEMENS 840D

Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm