british flag
Resale Logo

horizontal used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information boilers, high pressure containers,...  HERMANN SPRENGER GMBH  http://www.sprenger-essen.de 
banner logo
start page > keywords horizontal > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121128384 107

OSTAS OPK-105 for sale
Ring Bending Machines


OSTAS RING BENDING MACHINE TYPE OPK-105 -Shaft diameter 100 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and ...

 
OSTAS RING BENDING MACHINE

TYPE OPK-105

-Shaft diameter 100 mm
-Hydraulic
-Hardened special steel shafts
-1 set of hardened rolls
-All three rolls are driven
-Two digital displays
-Foot pedal
-Horizontal and vertical work
-Manual
-400V

DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS

(3 km from the German border)
 
Price  
    request
121128376 107

OSTAS OPK-125 for sale
Ring Bending Machines


OSTAS RING BENDING MACHINE OPK-125 TYPE -Shaft diameter 120 mm -Hydraulic -Hardened special steel shafts -1 set of hardened rolls -All three rolls are driven -Two digital displays -Foot pedal -Horizontal and ...

 
OSTAS RING BENDING MACHINE

OPK-125 TYPE

-Shaft diameter 120 mm
-Hydraulic
-Hardened special steel shafts
-1 set of hardened rolls
-All three rolls are driven
-Two digital displays
-Foot pedal
-Horizontal and vertical work
-Manual
-400V

DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS

(3 km from the German border)
 
Price  
    request
121128372 1403

REICH-TANK rainwater tank fodder tank for sale
P86 polyester tank 30,000 L GRP-tank water tank


P86 - used appr. 30 m³ / 30,000 litres polyester tank / GRP tank, manufactured by Reich company, aboveground, on two steel bases, in good condition. volume: appr. 30 m³ / 30,000 litres material: polyester / GRP  ...

 
P86 - used appr. 30 m³ / 30,000 litres polyester tank / GRP tank, manufactured by Reich company, aboveground, on two steel bases, in good condition.

volume: appr. 30 m³ / 30,000 litres
material: polyester / GRP
diameter: appr. Ø 3.00 m
length: 5.00 m
height: 4.30 m including base

Storage tank by manufacturer Reich, lying horizontally, aboveground tank on two steel bases, dome on the top of the tank body, multiple connections, in- and outlets, as depicted on the images.

The container can be used as a storage tank for many different media such as water, liquid feed or as a rainwater collection tank and much more.

Price upon request.

Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us.

More information and offers on our site:
profi-tanks(dot)de
 
Price  
    request
121128346 102

PUMA 10 S for sale
HORIZONTAL LATHE cnc


HORIZONTAL CNC lathe PUMA 10 S USED It is among the proposals of machine tools used for turning and between CNC TURNING TO RECOVERY TOOLS WITH FIXED used we find TURNING HORIZONTAL PUMA 10 S CNC USED The TURNING HORIZON ...
used machine
 
HORIZONTAL CNC lathe PUMA 10 S USED It is among the proposals of machine tools used for turning and between CNC TURNING TO RECOVERY TOOLS WITH FIXED used we find TURNING HORIZONTAL PUMA 10 S CNC USED
The TURNING HORIZONTAL PUMA 10 S CNC USED comes in exclusive offer for the industrialbay.it users.

Industrialbay deals with the sale of machine tools used for turning , the CNC TURNING TO RECOVERY TOOLS WITH FIXED used.

Are you looking for a machine tool for turning ? In the category Turning you find the horizontal lathe CNC used you are looking for

Some technical characteristics of the lathe CNC HORIZONTAL PUMA 10 S USED are:
Year 1994
Control Fanuc 0
Swing mm. 360
Bar capacity mm.68
Spindle nose ASA 8
CHUCK chuck 255
Turret 12 positions
tailstock
chip conveyor
presetting arm
1994
Price  
  IT   request
121128345 102

MAZAK SQT 10 MS for sale
HORIZONTAL CNC lathe


HORIZONTAL CNC lathe MAZAK SQT 10 MS USED It is among the proposals of machine tools used for turning and between CNC TURNING TO RECOVERY WITH MOTORIZED TOOLS used we find TURNING HORIZONTAL CNC Mazak SQT 10MS USED The ...
used machine
 
HORIZONTAL CNC lathe MAZAK SQT 10 MS USED It is among the proposals of machine tools used for turning and between CNC TURNING TO RECOVERY WITH MOTORIZED TOOLS used we find TURNING HORIZONTAL CNC Mazak SQT 10MS USED
The TURNING HORIZONTAL CNC Mazak SQT 10MS USED comes in exclusive offer for the industrialbay.it users.

Industrialbay deals with the sale of machine tools used for turning , the CNC TURNING TO RECOVERY WITH MOTORIZED TOOLS used.

Are you looking for a machine tool for turning ? In the category Turning you find the horizontal lathe CNC used you are looking for

Some technical characteristics of the lathe CNC HORIZONTAL MAZAK SQT 10 MS USED are:
ATTACK CHUCK HOME ASA 5
CHUCK AND AGAINST CHUCK
BAR PASSAGE MM. 42
TOWER IN POSITION MOTORIZED No. 12
MAXIMUM DIAMETER processing temperature range MM. 230
GIRIMANDRINI 6000
N. MOTORIZED AVAILABLE 6
CONSTRUCTION YEAR 1995
CNC MAZATROL PLUS
1995
Price  
  IT   request
121111989 1300  

LOEDIGE FKM 2000 D / 3 MZ for sale
Ploughshare Mixer 2.000 l.


Horizontal mixer with 2.000 l. gross capacity, incl. drive unit with 37 kW motor, Flender gearbox SZN 160 and Fludex clutch, incl. 2 choppers (upgrade to 3 choppers is possible). Main shaft is equipped with Becker shovel ...

 
Horizontal mixer with 2.000 l. gross capacity, incl. drive unit with 37 kW motor, Flender gearbox SZN 160 and Fludex clutch, incl. 2 choppers (upgrade to 3 choppers is possible). Main shaft is equipped with Becker shovels, discharge gate pneumatically operated. In very good condition, refurbished in 2017.

Available for an additional charge: Suitable weighing and dosing installation by AZO.
 
Price  
  DE   request
121098377 103

DEBER CNC for sale
milling machine


DEBER milling machine CNC bed used It is among the proposals of machine tools used for milling and between MILLING used CNC we find the CNC bed type milling machine used DEBER The milling DEBER CNC bed used is proposed  ...
used machine
 
DEBER milling machine CNC bed used It is among the proposals of machine tools used for milling and between MILLING used CNC we find the CNC bed type milling machine used DEBER
The milling DEBER CNC bed used is proposed in exclusive offer for the industrialbay.it users.

Industrialbay deals with the sale of machine tools used for milling , for CNC MILLING used.

Are you looking for a machine tool for milling ? In the category Milling you will find a type milling machine used you are looking for

Some features of the milling machine CNC bed DEBER used are:
year 1994
racing 2000x1200x1200
Motorized ram stroke 600
revs 3000
horizontal spindle iso 50
selca 3045
head birotary
Manual ISO 50
1994
Price  
  IT   request
121098295 836

MÜLLER MARTINI NewsGrip Chain tracks for sale
News paper Post Press


Aluminum channels, new 7587 (Brown) generation, straight profiles, horizontal and vertical curves for 15, 39, 45, 60 and 90 degrees. Price is per-channel piece

 
Aluminum channels, new 7587 (Brown) generation, straight profiles, horizontal and vertical curves for 15, 39, 45, 60 and 90 degrees. Price is per-channel piece
 
400 €  
  DK   request
121098230 210

AMS AUTOMAZIONI LINEA DI TRONCATURA/SMUSSATURA for sale


Automatic line for shutters slats cutting and heads rounding - AMS AUTOMAZIONI year of manufacturing 2004 CE standard surrounding safety fences user manuals + electric manual + CE cerificate working line suitable as ...
used machine
 
Automatic line for shutters slats cutting and heads rounding - AMS AUTOMAZIONI
year of manufacturing 2004
CE standard
surrounding safety fences
user manuals + electric manual + CE cerificate
working line suitable as it is (stand alone) or following to a planing/sanding line

1) MOTORIZED CONVEYOR BY INCLINED ROLLER
rollers dimension 3000x350 mm
No. 2 motor 0,37 kw each
photocell

2) MOTORIZED TRANSFER BY ROLLERS AND BELTS
longitudinal loading rollers 2000x150 mm
transversal conveyor by belts 2000x2000 mm
longitudinal unloading rollers 2000x150 mm
No. 3 motors 0,37 kw each
No. 3 photocells
independent electric cabinet

3) AUTOMATIC FAST CUTTING MACHINE
loading belt 2300x140 mm - motor 0,37 kw
cutting unit with blade diameter 300 mm and motor 1,1 kw
max working dimension 100x50h mm
No. 2 horizontal pistons for piece locking
electronic reference stop (stroke 2750 mm)
unloading belt 3450x140 mm - motor 0,37 kw
remote control
independent electric cabinet

4) AUTOMATIC HEADS-ROUNDING MACHINE
loading belt 5800x140 mm - motor 0,37 kw
heads rounding by pressure (not by tools)
No. 2 opposite crushing heads with interchangeble profiles
max working dimension 80x27h mm - length 900 mm
unloading belt 5800x140 mm - motor 0,37 kw
remote control
independent electric cabinet

5) MAIN ELECTRIC CABINET
including software for working line management
possible connection to other machines or working lines
2004
Price  
  IT   request
121098229 201

AMS AUTOMAZIONI LINEA DI TRONCATURA for sale
Cut-off saws


Automatic line for slats/frames cutting - AMS AUTOMAZIONI year of manufacturing 2004 CE standard surrounding safety fences user manuals + electric manual + CE cerificate working line suitable as it is (stand alone)  ...
used machine
 
Automatic line for slats/frames cutting - AMS AUTOMAZIONI
year of manufacturing 2004
CE standard
surrounding safety fences
user manuals + electric manual + CE cerificate
working line suitable as it is (stand alone) or following to a planing/sanding line

1) MOTORIZED CONVEYOR BY INCLINED ROLLER
rollers dimension 3000x350 mm
No. 2 motor 0,37 kw each
photocell

2) MOTORIZED TRANSFER BY ROLLERS AND BELTS
longitudinal loading rollers 2000x150 mm
transversal conveyor by belts 2000x2000 mm
longitudinal unloading rollers 2000x150 mm
No. 3 motors 0,37 kw each
No. 3 photocells
independent electric cabinet

3) AUTOMATIC FAST CUTTING MACHINE
loading belt 2300x140 mm - motor 0,37 kw
cutting unit with blade diameter 300 mm and motor 1,1 kw
max working dimension 100x50h mm
No. 2 horizontal pistons for piece locking
electronic reference stop (stroke 2750 mm)
unloading belt 3450x140 mm - motor 0,37 kw
remote control
independent electric cabinet

4) MAIN ELECTRIC CABINET
including software for working line management
possible connection to other machines or working lines
2004
Price  
  IT   request
121093093 103

HECKERT CW 800 for sale
Horizontal machining center


2 pallets 800 x 800 mm traverse path X Achse1050 mm travel Y-axis (vertical) 850 mm traverse path Z-axis (stand cross adjustment) 850 mm tool holder SK 50 TGL maximum workpiece dimensions Lxwxh 800 x 800 x 800 mm The ...
used machine
 

2 pallets 800 x 800 mm traverse path X Achse1050 mm travel Y-axis (vertical) 850 mm traverse path Z-axis (stand cross adjustment) 850 mm tool holder SK 50 TGL maximum workpiece dimensions Lxwxh 800 x 800 x 800 mm
The work spindle speed 20-4200 RPM.
Max tool diameter 270 mm
Spindle diameter 110 mm maximum torque 1000Nm spindle power 30 kw operating voltage 380 V - 50 Hz
60-Fach tool changer

more data see PDF machine is still under power.
There are two identical machines.
1989
12,000 €  
    request
121080751 103

HECKERT CW 630 for sale
Horizontal machining center


2 pallets of 600 x 600 mm traverse path X-axis 710 mm travel Y-axis (vertical) 560 mm traverse path Z-axis (stand cross adjustment) 630 mm tool holder SK 50 maximum workpiece dimensions Lxwxh 600 x 600 x 600 mm Distance ...
used machine
 
2 pallets of 600 x 600 mm traverse path X-axis 710 mm travel Y-axis (vertical) 560 mm traverse path Z-axis (stand cross adjustment) 630 mm tool holder SK 50 maximum workpiece dimensions Lxwxh 600 x 600 x 600 mm
Distance between two grid squares 700 mm
The work spindle speed 20-4000 RPM.
Max tool diameter 200 mm
Spindle diameter 100 mm torque 660Nm spindle output 18.4 of kw operating voltage 380 V - 50 Hz
60-Fach tool changer

more data see PDF
1989
9,000 €  
    request
121080701 1403

A1 STEEL BUILDINGS Prefab Steel Hall for sale
Mall Entrance Steel Tower


Dismantled entrance tower of a defunct "Praktiker" retail facility. POSSIBLE FUTURE USE: as exhibition hall, building entrance, office building, winter garden and much more. APPROXIMATE DIMENSIONS: Floor s ...
used machine
 
Dismantled entrance tower of a defunct "Praktiker" retail facility.

POSSIBLE FUTURE USE:
as exhibition hall, building entrance, office building, winter garden and much more.

APPROXIMATE DIMENSIONS:
Floor surface: approx. 152 square meters,
the footprint of the entrance tower has the shape of an irregular Pentagon.
Tower length: approx. 12.30 meters clear internal length.
Tower width: approx. 12.30 meters clear inner width.
Tower height: approx. 16.45 meters total height from terrain.
Height: approx. 13,45 meters roof level from terrain.
Height: approx. 12,50 meters clear height measured from the floor.

LIVE LOAD ASSUMTION:
regular snow load according to snow load zone II (elevation 400 m) s = 0,75 kN/sqm.

STRUCTURAL STEEL WORK:
the load-bearing structure of the tower is composed of a primed, coated, bolted steel frame construction made of hot-rolled (HEB 240) European Standard I-sections (steel grade St 37). The cladding is attached to the steel construction as posts and transoms from the inside of the tower. Three horizontal steel frames are installed below the roof surface. Transmission of the wind loads via the vertical steel columns. The roof level is it designed as a "Disc". Diagonal bracings are incorporated in the facades of the 4 exterior wall surfaces. Through this diagonal bracings, the wind forces are transferred to the base disc made of reinforced concrete Strip foundations.

ROOF:
the roofing consists of trapezoidal steel bearing shells (Hoesch type E 100-0.88 m) toped with thermal insulation (mineral fiber) and a water-bearing PVC membrane which was disposed of during deconstruction.

FACADE:
the facade cladding (of the 4 external wall surfaces consist of double glazing with ARGON gas filling) is attached to posts on the inside of the tower structure.

FACILITIES:
2 double electric sliding doors with canopies, one single glazed door, 2 radiators, various light fittings.

NOTE:
Back side facade is missing because the "Main Entrance Tower" was aded to an existing hardware store.

FORMER LOCATION:
Eriagstrasse 30, D- 85053 Ingolstadt, Bavaria.

AVAILABILITY:
the MAIN ENTRANCE TOWER was disassembled and packaged by professional fitters and can be picked up from storage yard.

DOCUMENTATION:
the original structural design calculations and design drawings are available.

NET PRICE EX YARD:
upon written request with complete company data of prospective buyer.
2002
Price  
    request
121080605 102

HANKOOK V. TURNMILL VTC 5060E for sale


HANKOOK Vertical Turnmilll 5000/6000 x 4500 Model VTC-5060E New In 2010 Control Fanuc 31i A Equipped 4 jaw Chuck 5000mm ATC 24 ( milling 12 +  ...
used machine
 
HANKOOK Vertical Turnmilll 5000/6000 x 4500

Model VTC-5060E
New In 2010

Control Fanuc 31i A

Equipped 4 jaw Chuck 5000mm
ATC 24 ( milling 12 + turning 12 )
Through Spindle Coolant
Through Tool Coolant
Tool Setter
Heidenhain Scales ( X,Z,C )
High Pressure Coolant System
Hydraulic Power Unit,22kw
Hydrostatic Oil Cooling System,19.5KVA
Splash Guard
Telescopic Steel Cover ( X )
Chip Conveyor & Tank
Horizontal Attachment BT 50
? Universal Angle Attachment BT 50
Square Tool Holder 50 x 240,290mm
Square Tool Holder 50 x 190,240mm ( through coolant type )
Boring Tool Holder BA type 32 x 370mm
Boring Tool Holder BP type 32 x 320mm
Boring Tool Holder BF type 32 x 370mm
Side Lock Holder 80pie x 295mm
Work Light,Patrol Lamp
Leveling Blocks

Spec Table dia 5000mm
Turning dia 6000mm
Turning height 4500mm
Max torque 35,109N.m
Max cutting force 33,110kgf
Table load 300ton
Table speed 1~50rpm/auto 2 step
Ram travel 2500mm
Saddle cross travel 4235mm
Crossrail travel 3000mm
Milling spindle motor AC37/45kw
Milling spindle speed 30~3000rpm
Milling spindle torque 190kgf.m
Table index 0.001degree
C axis feed 0~900degree/min
C axis rotation 120degree/min
Rapid feed 6m/min ( X,Z ),500mm/min ( W )
Cutting feed 6000mm/min ( X,Z )
Ram section 400 x 400mm
Spindle taper ISO 50
Tool size 50 x 50mm
Max tool weight 110kg
ATC pull stud SK50A ( DIN69872 )
Table motor AC100kw x 2set
Servo motor AC14kw ( X,Z ),AC14kw x 2 ( W ),AC16kw ( C )
Machine weight 230ton
Machine dimension 14,000 x 7,500 x 13,100mm ( L x W x H )
2010
Price  
  PL   request
121080515 502

BOLLEGRAAF HBC 80 A for sale
Bale press with cross tying system


Manufacturer Bollegraaf, Appingedam / the Netherlands Type HBC 80 A Year of construction 2000 Hours of operation approx. 25.000 h Press power of main press 78 t Press power of pre-press 45 t Drive power 45 kW Feed ...
used machine
 
Manufacturer Bollegraaf, Appingedam / the Netherlands
Type HBC 80 A
Year of construction 2000
Hours of operation approx. 25.000 h
Press power of main press 78 t
Press power of pre-press 45 t
Drive power 45 kW
Feed channel 1.485 x 1.100 mm
Bale size 1.100 x 720 mm, length variable
Bale weight 500 – 850 kg, depending on material
Tying system 8-fold cross (5 vertical /3 horizontal), automated
Throughput rates (depending on material)
Bulk density of 15 kg/cbm up to 4,5 t/h
Bulk density of 30 kg/cbm up to 9 t/h
Bulk density of 50 kg/cbm up to 14 t/h
Bulk density of 80 kg/cbm up to 20,5 t/h
Hydraulic oil tank 550 litres (BP-SHF-46)
Dimensions with funnel 10.690 x 2.050 x 6.604 mm (l x w x h)
Machine weight 24.000 kg as per identification plate

This press expected to be available in January 2018 can be inspected presently in running operation, yet.
Please note:
All technical data refer to specifications of producer/owner.
We will not assume liability for the given statements and possible errors.
This offer is non-binding, prior sale excepted and revocable at any time.
Inspections are possible after agreement.
The sale against prepayment is ex location, as it stands and lays, without any oil or wire, and without liability and guarantee.


2000
Price  
    request
121068596 103

HERMLE U 630 S for sale
CNC Milling Centers


Tool room milling machine - universal HERMLE U 630 S-Nr. 1105-02322 make HERMLE U type 630 S year 2000 State second-hand machine control CNC storage France country of origin Germany delivery immediately cargo base stock ...
used machine
 
Tool room milling machine - universal HERMLE U 630 S-Nr. 1105-02322 make HERMLE U type 630 S year 2000
State second-hand machine control CNC storage France country of origin Germany delivery immediately cargo base stock technical details x way 630 mm y-way 500 mm z trail 500 mm overall power demand 13 kW machine weight approx. 4,300 kg description C NC - controlled universal - tool room milling machine type U 630 S CNC HEIDENHAIN TNC 410, year 2000 technical data:
Table carriage longitudinal X 630 mm
vertical Z 500 mm
Milling travel across 500 mm Y

Table size 900 x 528 mm
Workpiece weights up to 800 kg
Spindle retainer for SK 40 21 spindle speeds vertical / horizontal 20-7000 RPM.
Quill stroke vertical / horizontal 75 mm

Feeds, stepless 1 - 15,000 mm / min.
Rapid traverse x/y/z 15,000 mm / min.

Spindle drive 11 kW
Total drive 13 kW - 380 V - 50 Hz
Weight of 4,300 kg accessories / special features:
HEIDENHAIN 4-axis path control type TNC 410 with graphics and various
Subroutines and options, mobile electronic hand wheel, etc.

Splash Panel in the form of cabin with sliding doors
Central lubrication system, separate coolant system, amp display, etc
2000
12,500 €  
    request
121061638 1401

TEGOMETALL SYSTEM Feldbreite 125cm, Höhe 200cm for sale
Gondola shelf shelf


Gondola shelving on both sides field width 1250 mm Tegometall compatible system Gondola shelving on both sides, a unit L = 1250 mm consisting of: Column profile 8 x 3 cm Height: 200 cm (205 cm with adjustable st ...
used machine
 
Gondola shelving on both sides field width 1250 mm

Tegometall compatible system

Gondola shelving on both sides, a unit L = 1250 mm
consisting of:
Column profile 8 x 3 cm
Height: 200 cm (205 cm with adjustable stand),
2 foot pieces: Depth 77 cm, height 16 cm, double-sided base ground (chipboard white coated),
about 3 floors on both sides shelves (as a sloping floor or horizontal shelf) depth 57 cm
1 front grille height 17 cm,.
Rear wall smooth,
Execution in Jura-white
1 unit L125 cm a. â?¬155.00 + VAT

for the completion of the unit at the end of the shelf line
1 end stand (column profile with 2 legs) a. â?¬26,00 Excl. VAT

Optional Division material: Please enquire.
Compartment grid length 125 cm, height 9,5 cm chromium-plated a. â?¬3.80 Excl. VAT
Barrier screen depth 57 cm, height 9,5 cm chromium-plated a. â?¬2,20 Excl. VAT

Price from stock D-97076 Würzburg

Available also as wall shelving (single version).

You are looking for individual solutions? Please contact us.

Freight shipping on favourable terms possible, please just ask.
 
155 €  
    request
121048058 103

ZIEGLER TX-20 for sale
Milling Machines


ZIEGLER TX-20 - drilling & milling machine Spindle retainer: MK2 Spindle speeds vertical: 50-2250 RPM Horizontal spindle speed: -. Quill stroke: 40 mm Throat depth: 160 mm Table: 500 x 180 mm Table rotation: ...
new machine
 
ZIEGLER TX-20 - drilling & milling machine

Spindle retainer: MK2
Spindle speeds vertical: 50-2250 RPM
Horizontal spindle speed: -.
Quill stroke: 40 mm
Throat depth: 160 mm
Table: 500 x 180 mm
Table rotation: -.
Traverse path X-axis: 280
Stroke Y-axis: 110
Z axis travel: -.
Feed axes: -.
Feed speed: -.
Drilling & milling head tilt: -.
T - slot width: 12 mm
Levels of transmission: continuously variable
Engine power: 0,6 kW
Voltage: 400 V
Dimensions: 730 x 1700 x 600 mm
Weight: 130 kg
Facilities: A.a..
new
1,040 €  
    request
121048041 103

ZIEGLER ZX-7550CW for sale
Milling Machines


ZIEGLER ZX-7550CW - drilling & milling machine Spindle retainer: SK40 Vertical spindle speed: 110-475 / 460-2000 RPM Horizontal spindle speed: 40-1300 RPM Quill stroke: 120 mm Projection: 150-770 mm Table: 13 ...
new machine
 
ZIEGLER ZX-7550CW - drilling & milling machine

Spindle retainer: SK40
Vertical spindle speed: 110-475 / 460-2000 RPM
Horizontal spindle speed: 40-1300 RPM
Quill stroke: 120 mm
Projection: 150-770 mm
Table: 1325 x 320 mm
Table rotation: +/-45°
Traverse path X-axis: 22-420 mm
Stroke Y-axis: 22-393 mm
Z axis travel: 6-112 mm
Feed axes: X, Y & Z
Feed speed: 22-420 mm
Drilling & milling head tilt:-90°-+90 °
T - slot width: 14 mm
Gear stages: 18
Engine power: 2,2 kW
Voltage: 400 V
Dimensions: 2030 x 1960 x 2400 mm
Weight: 2100 kg
Facilities: coolant system, lighting system u.m..
new
5,750 €  
    request
121048035 103

BERNARDO UWF-95 for sale
Universal Milling Machines


Bernardo UWF-95 - universal milling machine Spindle retainer: SK40 Vertical spindle speed: 110-475 / 460-2000 RPM Horizontal spindle speed: 40-1300 RPM Quill stroke: 120 mm Projection: 150-770 mm Table: 1325 x 32 ...
used machine
 
Bernardo UWF-95 - universal milling machine

Spindle retainer: SK40
Vertical spindle speed: 110-475 / 460-2000 RPM
Horizontal spindle speed: 40-1300 RPM
Quill stroke: 120 mm
Projection: 150-770 mm
Table: 1325 x 320 mm
Table rotation: +/-45°
Traverse path X-axis: 22-420 mm
Stroke Y-axis: 22-393 mm
Z axis travel: 6-112 mm
Feed axes: X, Y & Z
Feed speed: 22-420 mm
Drilling & milling head tilt:-90°-+90 °
T - slot width: 14 mm
Gear stages: 18
Engine power: 2,2 kW
Voltage: 400 V
Dimensions: 2030 x 1960 x 2400 mm
Weight: 2100 kg
Facilities: coolant system, lighting system u.m..
2008
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country