horizontal used for sale

Drum screening plant, screening machine, drum screen, sorting plant, vibrating screen, sorting system, classifier, check screen machine, decanter, decanter centrifuge -Drum screening machine: on rail chassis -Type: unfortunately no type designation -Sieve: Ø 640 x 2000 mm -Minimum height: 1550 mm -Max. height: 2000 mm -Rail length: 3020 mm -Dimensions: 2700/950/H1850 mm -Weight: 2000 kg

General SKU204U048 MakeAZO TypeDFS 140x1630 NE250 Mach.No.407065 Year of construction2007 Main Features Motor1.1 KW Length1810 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length1810 mm Shaft diameter35 mm Pitch120 mm Inletdia. 300 mm Outletdia. 193 mm Motor1,1 kW Screw speed88 rpm (50 Hz): 107 rpm (60 Hz) MaterialStainless steel 1.4404 (316L) General Mounted on framecheck LocationBarneveld Floorspace2,4x1,4 m Total height0,96 m Weight300 kg Extra SpecificationsContainer floor size 1,180 x 1,180 mm.This conveyor screw is equipped with a vibro motor.Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pha ...

General SKU292T671 LocationBarneveld CEcheck Main Features Motor1.1 KW Length5000 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter380 mm Length5000 mm Between inlet and outlet4650 mm Shaft diameter160 mm Pitch245 mm Inletdia. 175 mm Outletdia. 180 mm Motor1,1 kW 219-241/380-420 Volt (Ex) With variable speed drive(Ex) Screw speed27 rpm. (34 895 l/h) MaterialStainless steel General MakeVan Tongeren kennemer BV Mach.No.Z43721 / T4400 Year of construction2017 Floorspace6,5x0,7 m Total height0,7 m Weight700 kg ATEX designedcheckPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizont ...

General SKU244U280 LocationBarneveld Main Features Motor1.5 KW Length2340 mm Inlet diameter100 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter90 mm Length2340 mm Between inlet and outlet2000 mm Shaft diameter60 mm Pitch97 mm Inletdia. 100 mm Outletdia. 125 mm Insulatedcheck Motor1,5 kW 220-240/380-415 Volt Screw speed20-100 rpm Height between in- and outlet500 mm With coverscheck MaterialStainless steel 1.4552 General Makeunknown: missing type plate Floorspace3,5x0,4 m Total height0,45 m Weight300 kg Extra Specificationsthis conveyor screw served as an inlet for cryogenic grindingPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other ...

General SKU212U184 Makeunknown: missing type plate LocationBarneveld Main Features Motor5.6 KW Length2870 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter390 mm Length2870 mm Between inlet and outlet2400 mm Shaft diameter160 mm Pitch155 mm Inlet350 mm Outlet350 mm Motor5,6 kW 380 Volt (Ex) Screw speed120 rpm MaterialStainless steel 1.4301 (304) General Floorspace4,4x0,7 m Total height0,7 m Weight820 kg ATEX designedcheckPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizontal screw conveyorsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectioneryS ...

General SKU232U228 LocationBarneveld Main Features Motor0.37 KW Length4500 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter350 mm Length4500 mm Between inlet and outlet4400 mm Shaft diameter130 mm Pitch93 - 300 mm Inlet160x350 mm Outlet350x280 mm Motor0,37 kW 220-240/380-415 Volt Screw speed9,2 rpm Outlet height1430 mm Height between in- and outlet1030 mm MaterialStainless steel 1.4301 (304) General Makeunknown: missing type plate Floorspace5,2x1,1 m Total height1,9 m Weight550 kg Extra SpecificationsCapacity: 4256 Ltr/hPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizontal screw conveyorsE-waste ...

General SKU212T536 LocationBarneveld CEcheck MakeAmmag Main Features Motor1.5 KW Length1400 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Diameter187 mm Length1398,5 mm Shaft diameter106 mm Pitch103 mm InletDia. 200 mm OutletDia. 200 mm Motor1,5 kW 220-240/380-415 Volt (Ex) Screw speed96 rpm Outlet height388,9 mm Height between in- and outlet1130,1 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 With jacketcheck General TypeRDSCHN D187x1300x3,9° Mach.No.SR-1601 SG09 Year of construction2008 Floorspace1,1x0,5 m Total height0,65 m Weight230 kg ATEX designedcheckPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other phar ...

General SKU292T672 LocationBarneveld CEcheck Main Features Motor1.1 KW Length1900 mm Inlet diameter175 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter360 mm Length1900 mm Shaft diameter170 mm Pitch255 mm Inletdia. 175 mm (2x) Outletdia. 140 mm Motor1,1 kW 219-241/380-420 Volt With coverscheck MaterialStainless steel General MakeVan Tongeren kennemer Mach.No.Z43752 Year of construction2015 Floorspace3,2x0,55 m Total height0,6 mPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizontal screw conveyorsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceu ...

General SKU215W150 MakeFansider TypeCT168 Mach.No.21443 Year of construction2022 Main Features Motor1.1 KW Length2100 mm Inlet diameter160 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter160 mm Length2100 mm Between inlet and outlet1510 mm Shaft diameter90 mm Pitch100 mm Inlet580 x 160 mm OutletDia. 160 mm Motor1,1 kW, 400V, 1435 rpm Screw speed23 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General LocationBarneveld Floorspace3,45 x 0,80 m Total height0,40 m Weight410 kg CEcheck Extra SpecificationsCap. Approx 1800 l/hPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizo ...

General SKU316W643 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1634 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1634 mm Between inlet and outlet1500 mm Shaft diameter85 mm Pitch200 mm Inletø 230 mm Outletø 290 mm Motor1.1 kW,(400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet500 mm With coverscheck MaterialStainless steel 1.4301 (304) General TypeTSE 250/1634 Mach.No.04/3371 Year of construction2004 Floorspace2,60 x 0,40 m Total height0,90 m Weight320 kg Extra Specifications- opening for dust extraction/filter on topPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & other ...

General SKU239T284 LocationBarneveld CEcheck MakeGuttridge Main Features Motor5.5 KW Length4700 mm Inlet diameter400 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter460 mm Length4700 mm Between inlet and outlet3900 mm Shaft diameter150 mm Pitch325 mm Inletdia. 400 mm Outletdia. 300 mm Motor5,5 kW 400/690 Volt Screw speed89 rpm Outlet height1400 mm Height between in- and outlet1400 mm With coverscheck MaterialStainless steel General TypeScrew Conveyor Mach.No.580194-3-1 sc6.2 Year of construction2013 Mounted on wheelscheck Floorspace5,8x0,9 m Total height1,4 m Weight1600 kg Extra Specificationswith a rail systemScrew blade thickness 6 mm Technical specs Extra informationScrew blade thickness 6 mmPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBio ...

General SKU239T285 LocationBarneveld CEcheck Main Features Motor18.5 KW Length6500 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter720 mm Length6500 mm Between inlet and outlet5850 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet530x420 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck MaterialStainless steel General MakeGuttridge Mach.No.0580194-1-1 Year of construction2013 Floorspace7,5x1,8 m Total height1,5 m Weight2800 kg Extra SpecificationsScrew blade thickness 6 mm Technical specs Extra informationScrew blade thickness 6 mmPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSol ...

General SKU321S564 MakeSitecon Process Engineering Type:Trogförderschnecke: Mach.No.910-080-00 Year of construction2009 Main Features Motor3 KW Length1150 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter180mm Length1600mm Between inlet and outlet1150mm Shaft diameter90mm Pitch200mm Inletdia. 200mm Outletdia. 200mm Motor3 kW 230/400 Volt Screw speed106 rpm With covers(1x) MaterialStainless steel General LocationBarneveld Floorspace2,3x0,7 M Total height0,8 M Weight350 Kg CEcheckPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizontal screw conveyorsE-waste & metalFood additi ...

General SKU239T286 LocationBarneveld CEcheck Main Features Motor18.5 KW Length5000 mm Inlet diameter390 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter700 mm Length5000 mm Shaft diameterdia. 200 mm Pitch500 mm Inletdia. 390 mm Outlet650x400 mm Motor18,5 kW Screw speed33 rpm Height between in- and outlet1500 mm With coverscheck MaterialStainless steel General MakeGuttridge Mach.No.0580194-7-1 Year of construction2013 Floorspace7,3x1,7 m Total height1,40 m Weight3000 kg Extra SpecificationsSynatel level control, type digimatic, Schmersal sensorsScrew blade thickness 6 mm Technical specs Extra informationScrew blade thickness 6 mmPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed a ...

General SKU235K162 LocationBarneveld MakeAZO GmbH + Co. Osterburken TypeTrogschnecke TFS-315 G B A21 Main Features Motor2.2 KW Length2000 mm Inlet diameter315 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screw(1x) Trough-typecheck Diameter315mm Length2000mm Between inlet and outlet± 1450mm Shaft diameter90mm Pitch145/290mm Inletdia. 250mm Outlet2x dia. 300mm Motor2,2 KW, 230/400 Volt Screw speed± 76 Rpm With coverscheck MaterialStainless steel General Mach.No.408691 Year of construction2004 Floorspace2,9x0,5 M Total height0,6 M Weight260 KGPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsHorizontal screw conveyorsE-waste & metalF ...

General SKU204U043 MakeAZO TypeDFS 140x1630 NE250 Mach.No.446632 Year of construction2007 Main Features Motor1.1 KW Length1810 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length1810 mm Shaft diameter35 mm Pitch120 mm Inletdia. 300 mm Outletdia. 130 mm Motor1,1 kW Screw speed90 rpm (50 Hz): 109 rpm (60 Hz) MaterialStainless steel 1.4404 General Mounted on framecheck LocationBarneveld Floorspace2,4x1,4 m Total height0,96 m Weight300 kg CEcheck Extra SpecificationsContainer floor size 1,180 x 1,180 mm.This conveyor screw is equipped with a vibro motor.Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other p ...

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

Surface grinding machine

conventional ´ traditional Tischbohrwerk, work spindle diameter 85 mm Traverse paths x 1000 mm, y 1000 mm, z 900 mm, ISO 40,. Clamping area table 1000 x 1120 mm with position indicator

Well-preserved horizontal pillow-pack packaging machine. Very well suited for cylindrical or other elongated products. Was used to extract a sausage in foil. Please see the video. Fully functional, there is some evidence of second-hand. Price on request machine is immediately available.

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Plate filter with pump Manufacturer: Rover Pompe Type: Colombo Field of use: Olive oil Filter plates: 25 PCs. End plates: Stainless steel Sheet size: 20 cm x 20 cm Pump: Capacity: 28 l / min Conveying height: 22 m Water temp. Max: 35 ° C In very good condition! Plate filter incl. new replacement filter plates and replacement filters!

Bei Fragen: 01718367957

: 330 mm : 5000 mm : 450 mm : 330 mm : 450x330 mm dimensions of saw-band: 5000x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

CNC Control: FANUC 31i-B Axes X-axis travel mm: 1050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0.001º Distance between spindle - table top mm: 100-950 Work table Number of pallets: 2 Table dimensions mm: 630x630 Maximum part size (D x H) mm: ø1.100x1.100 Maximum weight of the piece kg: 1200 APC Time: 15.5 Spindle Spindle speed rpm: 10000 Spindle power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tooling System Tool Holder: HSK-A100 Tool Magazine Positions: 90 Max. tool diameter mm: ø250 Max. tool length mm: 550 Tool-to-tool time: 2.4 Chip to chip time: 4.5 Equipment Electronic steering wheel Chip extractor Washing Gun Signal light High Pressure Pump Mist collector 4th axis RS 232 Interface Internal cooling 3D Renishaw tool probe 4x pallets Toolholders are not included Machine Run Times Hea ...

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Capacity 85 beats / min.

Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.

Plate filters/layers filter on role Manufacturer: KTM Troxler Type: FP 430 30 filter plates made of plastic DN 25 outlet with valve bottom Filter plate size: 40 cm x 40 cm In very good condition!

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk

Horizontal turning machine manufactured in 2013. This Leadwell T-7 features a maximum turning diameter of 350 mm and a maximum turning length of 540 mm. It includes a 12-station hydraulic turret and a spindle speed of 1,750 rpm. If you are looking to get high-quality turning capabilities, consider the Leadwell T-7 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2008. This Okuma ES-L10II features a maximum turning diameter of 390 mm and a maximum turning length of 500 mm. It is equipped with a 10 chuck and a robust Okuma MQ Turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma ES-L10II machine we have for sale. Contact us for further details regarding this machine.

This 4-axis Kitamura Mycenter HX500iG was manufactured in 2015. It features a maximum workpiece diameter of 800 mm and a maximum workpiece height of 1,100 mm. The machine includes a robust pallet size of 500 x 500 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter HX500iG horizontal machining centre we have for sale. Contact us for further details.

Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t

Horizontal grinding machine ELB, magnet 500/350 mm, table 840/350 mm, mesh. No. 140030676

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Key data: 1000 , 600 , 400

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up

Horizontal turning machine manufactured in 2003. This Hyundai HIT-200C features a maximum turning diameter of 340 mm and a turning length of 420 mm. It is equipped with a Siemens Sinumerik CNC control and has an X-axis travel of 240 mm and Z-axis travel of 430 mm. If you are looking to get high-quality turning capabilities, consider the Hyundai HIT-200C machine we have for sale. Contact us for further details.

Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.

OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M

This complete automated production cell includes two Hyundai HIT-200C CNC lathes and a FANUC M-20iA industrial robot with a ROBOTOWER automatic loading and unloading system. Each lathe offers a maximum turning diameter of 340 mm and a maximum turning length of 420 mm. The complete cell is designed for automated serial production, especially for larger production batches. Contact us for further details regarding this production cell.

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

HEBÖ WZT24 24T horizontal bending machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ WZT24 is a efficent horizontal bending machine designed for the precise bending, forming and straightening of workpieces made from materials suitable for cold forming. All these processes are performed by a horizontal working unit with a maximum press force of 24 tonnes. The machine is equipped with a 950 x 600 mm work table and a tool cabinet, which provides convenient storage for the necessary tools. The machine operator has at his disposal an intuitive PLC controller and an ergonomic foot control. All this is complemented by a rigid design that ensures proper stability during intensive machining operations. The HE ...

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information.