horizontal floor type used for sale

General SKU366W1572 MakeKrahnen LocationBarneveld CEcheck TypeAirflex 30 type 4 Main Features MaterialStainless steel Specified Features - Miscellaneous Capacity470 mm MotorAir MaterialStainless steel General No.3405030 Year of construction2009 Floor space0,60x1,50 m Total height1,12 m Weight69 kg ATEX designedcheck Extra information Suction width 650 mm, brush width 470 mm, tank volume 21 l., dirty tank volume 25 l., air cap. 61-90 m3/h, suction cap. 148 m3/h Generic medicinesOintmentsMiscellaneousTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlasti ...

530 m² mezzanine floor 1-storey Stow Used goods, good condition, see pictures Length approx. 24m Width approx. 22m Height 1 level upper edge approx. 4.3m Height lower edge approx. 3.88m Load per m² 500 kg Stud type: Shaped tube profile 120/120 incl. 2 stairs incl. 4 transfer stations incl. 2 side railings Negotiation price: € 39,000,-- net from stock Partial sale and CAD planning possible. All plans and statics available. Mezzanine floor already dismantled, loaded by seller. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices ...

This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty  ...

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Antistatic industrial flooring, grey mottled used, good condition Click plates Thickness: approx. 10.4 mm Different sizes available: ca. 410 pcs. Abm. approx. 600 x 600 mm approx. 129 pcs. Abm. approx. 600 x 300 mm ca. 90 pcs. Abm. approx. 1,000 x 600 mm ca. 40 pcs. Abm. approx. 1,200 x 600 mm ca. 3 pcs. Abm. approx. 600 x 530 mm Price: on request Location: Bochum Intermediate trade reserved

Baking oven with 4 floors, hood and stand Dimensions: 165x155x215cm Electric power: 10.5kW

Bakery Oven with 4 floors and a fermentation chamber Dimensions: 115x120x200cm Electric power: 42kW Capacity: 2 trays x 60x80cm

General SKU382X960 LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Miscellaneous Capacity200 kg Motor100-240 volt Capacityd=0,01 MaterialStainless steel 1.4301 (304) General MakeSartorius Intec TypeIFS4-300II-L Mach.No.346 383 40 Floor space1,0x0,8 m Total height1,0 m Weight60 kg Extra information This floor scale was installed in its original configuration with multiple accessories. - Pharmatech flexisieve 350 0.1m², SKU 382X961 (SOLD) - Pharmatech 2000 ltr double cone blender SKU 382X962 - Pharmatech Hoist, SKU 382X963 Generic medicinesOintmentsMiscellaneousTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubricants & oleoAnim ...

Floor Slabs (Filigree) Carousel VOLLERT, Control: PTA-WIGGERT Capacity approx. 800m2/ day Steel pallets 2,4 x 13,5 m, 43 pieces Manufacturer Nuspl and Schwinghammer Year of construction 1994 Complete steel processing (FILZMOSER) Including longitudinal wire straightening machine with 6 wires and hyperbolic rotor, diameter 6-14 mm Cross wire roller straightener diameter 8 mm Producing of spacers on cross wires Lattice girder processing, measuring and cutting equipment Steel robot for laying bars and lattice girders Cleaning and plotter, Weckenmann Concrete spreader, Weckenmann Vibration station SKAKO Curing chamber with fully automatic restacking crane VOLLERT Control system completely renewed in 2014 by PTA Wiggert Master computer is integrated

Pallet circulation system for the production of Twin-Wall Panels and Filigree Floor Slabs comprising: 56 pallets; length = 10.00 m, width = 3.00 m Longitudinal and transverse transport systems for the pallets Stacker crane for storing and retrieving the pallets Curing chamber with 50 storage spaces 1 tilting station at the demoulding station Stacking areas with transfer trolleys Transfer trolleys for horizontal and vertical precast elements Automatic concrete distributor (built in 2018) Turning device for the production of double walls Beckhoff control system 2 laser plotters, from Z-Laser Steel processing PROGRESS: Straightening and cutting system, Progress MSR2/16 with positioning device for the steel of a complete pallet – plotter by Z-Laser Lattice girder cutting system for wall girders Spare parts for electrical/control systems, spare parts for mechanical c ...

- 2 units availebel matching cast irion floorplates bedplates - Integrated levelling chambers - Can be used in combi with PAMA SPEEDRAM 1000 Machid 8643 - Testing area - Mounting area - Measuring area - Calibration area

General SKU291Y513 LocationBarneveld CEcheck MakeKrahnen Main Features MaterialStainless steel Specified Features - Miscellaneous Capacity400 mm MotorAir Capacity6 bar MaterialStainless steel General TypeKrahnen Airflex 30 Type 4 No.201186 Year of construction1999 Floor space1,40 x 0,65 m Total height1,00 m Weight90 kg ATEX designedcheck Extra information ATEX marking: G + D (gas and dust)Suitable for use in zones 1 / 2 / 21 / 22Drive: compressed air, 4–8 barAir consumption: 61–90 m³/hNumber of brushes: 1 (hard, natural fibre)Brush pressure: 0.25 N/cm²Working width (brush): 400 mmSuction capacity: 148 m³/hFresh water tank volume: 10 lDirty water tank volume: 11 lEX vacuumcleaner Generic medicinesOintmentsMiscellaneousTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPa ...

IBS horizontal cement silos represent a practical, flexible, and cost-effective solution for the storage and controlled dosing of cement and other powdered materials. Thanks to their compact and modular design, no foundations, additional construction work, or complex installation procedures are required. This makes the silos ideal for mobile and stationary concrete batching and mixing plants, as well as construction sites with limited space or frequent equipment relocation. The silos are manufactured from high-quality steel and protected with durable surface coatings, ensuring a long service life and reliable operation even in demanding working conditions. Each silo is equipped with: - integrated aeration system - dust filter - safety valve - material level sensors - screw conveyor for continuous and reliable material discharge The silos can also be equipped with an electro ...

60 x 300 cm without stand

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen  ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...

Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, 261 targets - used - : Price sorter incl. control, continuous roller conveyors and pick by light (without conveyor technology) from location: 99.500.-€ (net), incl. dismantling, packed and loaded! Price of the existing Transnorm conveyor technology (approx. 170m) incl. scanner and labeller: 15.000.-€ (net) incl. dismantling, packed and loaded! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of Make: 2013 • UNIQUE PUSH TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6000 trays/h Total length of the system: 53 m Total width of the system: 14 m Number of infiltration stations: 1 Width of infiltration station: 2 m Number of trays: 200 pieces Usable size on the trays ...

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Horizontal Käde packaging machine

Key data: 75 KW, 300 1/min

Herford engine, diesel heavy oil engine, 1 cylinder, horizontal piston 75 hp 300 rpm, engine was completely overhauled by Fachwerkstatt Schenkluhn, collector's item

Key data: 2200 t

Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Description Hartmann Horizontal Slicer test machine like new Sale on behalf of customer

General SKU245P322 LocationBarneveld MakeSeitz-Werke GmbH (DE) TypeRZ 60A KC Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface1.75 m2 Cake3.5 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Filter surface1,75 m2 Number of platens11 Platen sizesdia.600mm Max. temperature165 degr.C. Cake capacity3,5 Ltr Capacity270 Ltr MaterialStainless steel 1.4571 (316Ti) General Mach.No.1701 Year of construction1975 Mounted on legscheck Floorspace1,0x1,0 M Total height1,8 MFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersSeitz - WerkeIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > Biotechno ...

General SKU366W1288 MakePeter Vossen LocationBarneveld Main Features MaterialStainless steel Volume160 Ltr. Specified Features - Horizontal tank Horizontal tankcheck Capacity160 l. Sizesdia. 500x1000mm Dished frontscheck Top connectionscheck OutletDia. 50 mm MaterialStainless steel 1.4552 General No.8340 Year of construction1989 Mounted on legscheck Floorspace1,0x0,50 m Total height0,60 mGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesDairyLubricants & oleoAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicPaints & coatingsOils & fatHorizontal tanksPeter VossenIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemi ...

General SKU442W1463 LocationBarneveld CEcheck MakeDutch TecSource Main Features Motor0.55 KW Length2000 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter300 mm Length2000 mm Shaft diameter100 mm Pitch130 mm With hoppercheck Inlet230x70 mm Outlet160x155 mm Motor0.55 kW, 230/400 volt Screw speed59 rpm Outlet height1180 mm With coverscheck MaterialStainless steel 1.4552 General Typedoseer/mengschroef Mach.No.20030328 Year of construction2004 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace2,5x1,0 m Total height1,8 m Weight430 kg Extra information This screw conveyor is equiped of spray nozzles along the length of the screw. on the product input side is an opening to let sprayed liquid flow out again. Tea, herbs & coffeeStarchRubberAgrochemicalsSpicesPlast ...

General SKU418W1321 MakeQVF Engineering GmbH LocationBarneveld TypeDN400 Main Features MaterialGlass Specified Features - Separator Separatorcheck Separators Capacity210 l. Specified Features - Separator MaterialGlass General No.40608124/5650 Mach.No.GT67691 Year of construction2006 Floorspace0,6x1,8 m Floor space0,6x1,8 m Total height0,7 m Weight220 kg Extra SpecificationsInlet dia. 50mm, outlet dia. 50 mm, with overflow valve outlet dia. 80mm, coalescence separator with 6 elements L=540mm,allowable pressure -1/+0,5 bar, allowable temperature 160°CGeneric medicinesBiotechnologyFeed additivesCosmeticsFood additivesDairyLubricants & oleoSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPISeparatorsOils & fatQVF GlasstechnikIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustrie ...

General SKU203W025 MakeCuno Type16ZPB1 No.274413 Year of construction2004 LocationBarneveld Pressure Working pressure5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Without platescheck Top connectionsDN Liquid outletcheck Max. temperature90°C MaterialStainless steel 1.4404 (316L) General Mounted on wheelscheck Floorspace1,15x0,65 m Floor space1,15x0,65 m Total height1,90 m Weight125 kg CEcheck Extra information Design pressure-1/10 bar, test pressure 16 bar, operating pressure 5 bar, design temperature 0-90°C, operating temperature 0-60°C, volume 60 l. In and put DN40 vessel dia. 450 mm,  No filterplates included. Fine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pha ...

General SKU251U306 MakePfaudler LocationBarneveld Pressure Number of horizontal pressure tanks1 Main Features MaterialGlass Volume750 Ltr. Specified Features - Horizontal tank Capacity750 Ltr. Vessel sizesDia: 1000x1800mm Dished bottomcheck Dished frontscheck Manhole2x side, dia: 900 mm Top connectionscheck OutletDN50 Max. temperature+100ºC Horizontal tanks MaterialGlass - Enamel (WWG) General No.50626 Year of construction1990 Mounted on legscheck Floorspace1,0x2,4 mtr Total height1,8 mtr Weight780 kgGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesDairyLubricants & oleoAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicPaints & coatingsOils & fatHorizontal tanksPfaudler-w ...

General SKU258S235 MakeEaton Technologies GmbH (D) Type16:/3x3/FH01K No.1026491 Year of construction2013 Mounted on legscheck Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Liquid outletdia. 50mm Max. temperature-10/140 degr. C Horizontal plate filters InletDN 50 (2x) OutletDN50 (3x) Specified Features - Horizontal plate filter MaterialStainless steel 1.4404 (316L) General LocationBarneveld Floorspace1,2x 1,2 M Total height1,8 M Weight800 Kg CEcheck Extra information barrel content 806 ltr  without filters Fine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersEatonIndustri ...

General SKU293X392 MakeMerck millipore TypeViresolve Pro + Magnus Holder No.BM2AB5823 Year of construction2023 Mounted on framecheck Pressure Working pressure76 Bar Main Features MaterialStainless steel Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Number of platens2 Platen sizes200x330 mm Solids outletcheck Liquid outletcheck With pumpManual hydraulic pump CapacityMax 124 bar MaterialStainless steel 1.4401 (316) General LocationBarneveld Mounted on wheelscheck Floorspace1,10x0,80 m Total height1,07 m CEcheck Extra information With 18 various Pro Magnus filter plates. 7x Magnus disposable fittings kits.  8x grooved clamp rods. Enerpac spare hydraulic pump. Fine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes  ...

General SKU302X437 MakeSparkler LocationBarneveld Type18-S-7-RF Pressure Working pressure4 Bar Main Features MaterialStainless steel Surface1 m2 Cake95 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface1,0 m² Platen sizesDia. 500 mm Top connectionsDN20 Solids outletDN50 Liquid outletDN50 Max. temperature100°C Cake capacity95 l. MaterialHalar coating, Stainless steel 1.4571 (316Ti) General No.14889 H-3282 Year of construction1995 Mounted on legscheck Floorspace0,70x0,70 m Total height1,50 mFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersSparklerIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalI ...

General SKU307X459 MakeGauthier LocationBarneveld Pressure Working pressure3 Bar Main Features MaterialStainless steel Surface0.15 m2 Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface0,15 m² Number of platens9 Platen sizesDia. 430 mm Top connectionscheck Solids outletDN25 Liquid outletDN25 With jacketcheck MaterialStainless steel 1.4306 (304L) With jacketcheck General No.685 Year of constructionunknown Mounted on wheelscheck Floorspace0,65x1,10 m Total height1,40 m Weight350 kgFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersGauthierIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemi ...

General SKU307X548 MakeGauthier LocationBarneveld Pressure Working pressure3 Bar Main Features MaterialStainless steel Surface0.15 m2 Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface1,05 m² Number of platens7 Platen sizesDia. 430 mm Top connectionscheck Solids outletDN25 Liquid outletDN25 With jacketcheck MaterialStainless steel 1.4306 (304L) With jacketcheck General No.1041 Year of constructionunknown Mounted on wheelscheck Floorspace0,65x1,20 m Total height1,40 m Weight320 kgFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersGauthierIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chem ...

General SKU212T470 MakeDidier Filtertechnik GMBH TypeMSF 600/F No.HW-16657 Year of construction2003 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Vacuumcheck Surface3.1 m2 Specified Features - Horizontal plate filter Filter surface3,1 m² Horizontal plate filters Filter presscheck Filter surface3,1 m² Stainless steel platescheck Number of platens12 Internal platen sizesDia: 564 mm External platen sizesDia: 604 mm Platen thickness48 mm Frame thickness38 mm Cake capacity112 Ltr. Central inletcheck ConnectionsDN 25 (2x) With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitmanual Mechanical closingcheck Specified Features - Horizontal plate filter MaterialStainless steel 1.4571 (316Ti) General Mounted on wheelscheck Floorspace1.5x1 m Total height2,4m Weight1 ...

General SKU244X191 MakeKöllemann LocationBarneveld CEcheck TypeDT KSF 2XDN300 5500 lg Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm MaterialMild steel With jacketcheck General No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Floorspace8,0x1,10 m Total height2,0 m Weight2800kg Extra Specificationsthe screw is coolableTea, herbs & coffeeStarchRubberAgrochemicalsSpicesPla ...

General SKU397X1073 LocationBarneveld MakePfaudler-Werke TypeCH25000 Main Features MaterialGlass Volume27222 Ltr. Specified Features - Horizontal tank Horizontal tankcheck Capacity27222 l. Manholecheck Top connectionscheck Outletcheck Max. temperature-10°C/+50°C MaterialGlass - Enamel (WWG-9115) With jacketcheck General No.62764 Year of construction1997 Mounted on legscheck Weight7600 kgGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesDairyLubricants & oleoAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicPaints & coatingsOils & fatHorizontal tanksPfaudler-werkeIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine c ...

General SKU364X866 LocationBarneveld CEcheck Main Features Motor0.75 KW Length2750 mm Inlet diameter150 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter150 mm Length2750 mm Between inlet and outlet2300 mm Shaft diameter60 mm Pitch75 mm Inletø 150 mm Outletø 150 mm With jacketcheck Motor0,75 kW (400 V, 1435 rpm) Screw speed41 rpm Height between in- and outlet800 mm MaterialStainless steel 1.4301 (304) With jacketcheck General MakeAzo Mounted on framecheck Floorspace3,30 x 0,60 m Total height0,85 m Weight500 kg Extra SpecificationsWith a cooling jacket: Messer nitrogen valves.Capacity: approx. 2,737 L/h.Can be used for (cryogenic) feed of sku 364X863 Hosokawa Alpine 500 UPZ Cryogenic Milling LineTea, herbs & coffeeStarchRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDeterge ...

General SKU308U650 MakeLFC Lochem bv LocationBarneveld TypeMVDCD 900/1000/13.5/11 Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface13.5 m2 Cake330 Ltr. Specified Features - Horizontal plate filter Plate filter:Vertical pressureleaffilter: Notified bodyTÜV Filter surface13,5m2 Number of platens11 Between the plates70mm Solids outletdia.350mm With jacket(20 ltr) Max. temperature10-160°C Cake capacity0,33m3 MaterialStainless steel 1.4404 (316L) With jacketcheck General No.P9501/0480C Year of construction1996 Floorspace1,5x1,2 M Total height2,8 M Weight1000kg Extra Specifications- with knockerFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmac ...

General SKU280P459 LocationBarneveld MakeSTAWAG Chemieapparate - Anlagebau und Projectierung (CH) TypeFUNDA LRA-0.5m2 -10-300-40-400 No.WA-9256.0 Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Cake15 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Filter surface0.5 m2 Number of platens10 Platen sizesdia.300mm Between the plates40mm Solids outletDN150 Liquid outletDN25 With jacket(10 Ltr) Max. temperature150 degr,C. Motor1,1 KW, (EX) Stirrer speed/filter speed 800 rpm Cake capacity15 Ltr MaterialStainless steel 1.4435 (316L) With jacketcheck General Year of construction1986 Total height1,7 m ATEX designedcheck Extra Specificationsfilter size 70 µmFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additive ...

General SKU186G1027 MakeSchenk TypeZHF-SR 20 KLK No.1889 GW Year of construction1981 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface20 m2 Cake600 Ltr. Specified Features - Horizontal plate filter Plate filter(1x) Filter surface20 m2 Number of platens28 Platen sizesDia.985mm Max. temperature166°C. Cake capacity600 l MaterialStainless steel 1.4571 (316Ti) General Floorspace1,5x1,5 m Total height2,6 m Weight1250 kg Extra SpecificationsVessel capacity: 1300 ltr., platens can rotate for cleaningFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filters3V Cogeim SpaIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemica ...

General SKU316S533 MakeHoeksma en Velt Zuivelwerktuigen (NL) LocationBarneveld Main Features MaterialStainless steel Volume4000 Ltr. Specified Features - Horizontal tank Horizontal tankcheck Capacity4000 Ltr. Top connections3100x1600 mm Outlet73 mm (2x) Motor1,3 kW 400 Volt Speed mixing shaft9,6/19 rpm. MaterialStainless steel 1.4401 (316) General No.5656 Year of construction1967 Mounted on legscheck Floorspace3,8x1,8 M Total height1,8 M Weight1200 KgGeneric medicinesOintmentsFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesDairyLubricants & oleoAnimal feedOther feedConfectioneryBeveragesDyes & pigmentsAPIMinerals & inorganicPaints & coatingsOils & fatHorizontal tanksHoeksma & VeltIndustries > Pharmaceutical > Generic medicinesIndust ...

General SKU210P145 MakeMavag AG Verfahrenstechnische Apparate und Anlagen (CH) TypeR-2-18-400-40-500-316L No.29.1000 Year of construction2009 Mounted on framecheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface2 m2 Cake60 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface2 m2 Number of platens18 Platen sizesdia.400mm Between the plates40mm Top connectionsdia.28mm Solids outletdia.260mm Liquid outletdia.28mm Max. temperature-5 / +120 degr.C. Motor3,0 KW, 230/400 Volt Cake capacity60 Ltr Centrifugal cake dischargecheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) General LocationBarneveld Floorspace1,0x1,0 M Total height2,7 M CEcheckFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCat ...

General SKU281N330 MakeRobatel slpi TypeEH 1050 No.B89259C Year of construction1990 Mounted on framecheck Main Features MaterialStainless steel Motor22 KW Inlet diameter1050 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity220 Ltr. Basket sizesdia. 1050x480 mm Max. loading weight237 kg Motor22 kW, 220/380 Volt Max. basket speed1550 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Inletdia. 85 mm Solids outletdia. 250 mm MaterialStainless steel General LocationBarneveld With switchcheck Floorspace3,2x2,5 M Total height2,3 M Weight8100 KGGeneric medicinesBiotechnologyPeeling centrifugesCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicRobatelIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyCentrifuges ...

General SKU171N795 MakeSeitz Radium TypeRZ60A6KNC No.1819 Year of construction1980 Mounted on legscheck Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface5 m2 Cake28 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Notified bodyTÜV Filter surface5 m² Number of platens18 Platen sizesø 600 mm Between the plates20 mm Top connections2x DN25 Liquid outletø 50 mm Max. temperature165 °C Cake capacity28 l. MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace1,1 x 1,2 m Total height1,8 m Weight850 kgFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filtersSeitz - WerkeIndustries > Ch ...

General SKUR0856 MakeMavag AG (CH) LocationBarneveld CEcheck TypeHP840 Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface6 m2 Specified Features - Horizontal plate filter Plate filtercheck Without platescheck Top connectionsdia. 80mm (1x) dia. 50mm (2x) dia. 25mm (1x) Solids outletdia. 50mm Liquid outletdia. 50mm With jacket(50 ltr) Max. temperature-10/80 degr.C With hydraulic drivecheck Motorpneumatic driven With pumpcheck Capacity250 bar MaterialStainless steel 1.4404 With jacketcheck General No.24.1801 Year of construction2005 Mounted on legscheck Floorspace2,1x1,3 M Total height2,5 M Weight1300 kg Extra SpecificationsWITHOUT FILTER PLATESFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCos ...

1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk