134,941 used machines on RESALE, but how to find them? Machine Search
Agitator tank with 3800 l capacity. Container in stainless steel 1.4301. Agitator motor 11 kW, 98 rpm.
T14 - used approx. 22 m³ / 22,000 L steel tank, repainted inside and out, with heating coil, lying on steel bases. Technical details: Content: approx. 22 m³ / 22,000 litres Material: Steel tank with inner coating Dimensions: approx. Ø 2.30 m × L 5.30 m / H total 2.70 m Other: Used steel tank, repainted inside and out, with heating coil. In good condition. Horizontal, above-ground storage tank on 2 steel bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., or e.g. as a firefighting water tank. Price on request. Transport can be organised at a reasonable price. It is ...
200 litres, hole in cap, equipped with tap Auction-ID: A1-49016-84
Flow rate 40 LPM (10 GPM) -voltage 12V ; Inlet/ outlet: 3/4\" ; Duty cycle 30min; Speed 4300rpm Auction-ID: A3-46147-1263
3,150 LITRE STORAGE TANK https://eurolux.de/product/23-0274euba-3150-liter-storage-tank MJ UNI-PFU Total height: 4600 mm Cylinder height: 4000 mm Diameter: 1000 mm Topsoil: with bobbin bottom with threaded nozzles DN50 and DN65 with DN50 manhole in the lid Cylinder: with level indicator without scale plastic with threaded nozzle DN65 front with tasting tap with dip shank sleeve for temperature display Subsoil: with bobbin bottom with DN65 residual drain pipe pulled forward
Function: for demineralized water Capacity: 30L/h Conductivity: 10μS/cm Auction-ID: A7-49596-4
DC12V; 240W; 10A; 2900rpm; IP55; 6GPM (26L/min); 1.6bar; -5°C/+40°C; unused Auction-ID: A3-46147-1268
Matcon IBC Discharge cone Stainless steel, 1000L, IBC discharge stations, 4 in stock
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm
20,000 LITERS STORAGE TANK/ PRESSURE TANK/ BEER TANK GRESSER CAT NO: 24-0576EUBA MJ UNI KAR Link to product: https://eurolux.de/product/24-0576euba-20000-liter-lagertank-drucktank -biertank-gresser Specifications Surface outside 2B=IIIC ground Manufacturer: Gresser Surface inside 2B=IIIC ground Material V2A (AISI 304) 1.4301 Volume 20000 L Total height 4600 mm Cylinder height 3000 mm Diameter 2700 mm Operating pressure 0.99 bar Operating temperature range 20 C Vertical design Year of manufacture 1991 Number of feet 4 Last Use Food Technical Documentation No Topsoil: Clapper bottom 2 crane eyes Threaded Sockets Tank cylinder: Manhole oval 440 x 430 mm Tasting tap Ladder hooks CIP line DN 40 pulled down with airlocked casing Subsoil: Clapper bottom forward-drawn residual drain pipe with disc valve DN 50 4 fixed feet
Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!
A mixing tank with propeller agitator is offered. Volume: approx. 4000l, internal height: approx. 2000mm, internal diameter: approx. 1650mm, internal material: acid- and alkali-resistant plastic, outer shell: GRP. Equipped with mixing system: variable-speed propeller agitator, manhole, air-operated diaphragm pump for product feed, bottom drain, extraction system and working platform. An on-site inspection is possible.
Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm
DC12V; 240W; 10A; 2900rpm; IP55; 6GPM (26L/min); 1.6bar; -5°C/+40°C; unused Auction-ID: A3-46147-1267
40LPM/10GPM; 12V; inlet/outlet: 3/4\"; Duty cycle: 30min; 4300rpm; unused Auction-ID: A3-46147-1266
Capacity: 1.230 Ltr. Operating pressure: 3.0 bar, according to the nameplate Year of Make: 1999 Manuf.: Caspary GmbH Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,270 mm (with cleaning line) Diameter: approx. 950 mm Mail: infohochholzer
Must be transported with special transport. Auction-ID: A3-46147-17352
Aquanext Split Inv Tank 270 FS Water Heater + Outdoor Split Inverter Unit Aquanext Split Inverter Chaffoteaux combines a heat pump and a hot water tank available in 270L. It offers the best performance on the market and maximum installation flexibility (2-20 m, difference in height +/- 10 m). As for installation, the Aquanext Split Inverter offers the greatest installation flexibility for both new and small multi-family homes. Benefits and performance: - Enamelled steel tank. - Double protection of the flask tank, provided by an active anode and a magnesium anode. - Dual power level soapstone resistance, allowing maintenance without emptying the tank and limits scaling. - Ultra-fast heat-up time of up to 3 hours 19 minutes and up to 375 L of DHW available at 40 °C. - Inverter technology: Modulates its power according to needs for water heating. - 80% energy savings compared to the ...
Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer
Thorsteel s/s storage tank used for tomato sauce, serial number: 190530-100-001, year of construction: 2019, volume: 700 liter, weight: 230 kg, dimensions: 1100 mm x 1200 mm x 1500 mm.
ECOLAB tank and dosing system for belt lubrication, model: Lub-O-Mat, dimensions: 1930 mm x 1480 mm x 2900 mm.
KHS AG s/s tank used for wine, type: Ausleergefäss, serial number: 491-01-01, year of construction: 2009, volume: 1000 liter, dimensions: 2150 mm x 800 mm x 1550 mm.
KHS AG isolated tank, dimensions: Ø 3350 mm x 5350 mm.
Flowtech Flowboost 2V JH1 water pump system with tanks 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph
Part No.: 0000071163 // Type: ALPHA20 HOR Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633)
Tank capacity: 500 liters. Maximum pressure: 11 bar. Auction-ID: A1-49552-89
Manufacturer: ETSCHEID Content: 2000 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit very good condition, fully functional
used
OKS Stationary Air Pressure Vessel Galvanized 1 piece 2000 liters 1 piece 1000 liters Test pressure 16 bar, operating pressure max. 11 bar at call Tel. 01715213204
A large stainless steel pressure tank is sold. Specifications: Manufacturer: BAM Freising Capacity: 8.000 Ltr. Year of Make: 1961 Pressure: 5 bar Papers available Dimensions: LxD: 3,800x1,800mm
For sale is a small insulated stainless steel transport tank with a capacity of 1,000 Ltr. The tank has forklift mounts and is permanently mounted on the frame. If you are interested, please contact us.
Container Rotating Device - Roller Block Mobile rotary device with hydraulic height and lateral displacement Load capacity 8 x 150 tons Component diameter 5,000 to 12,000 mm several rotary devices must be installed to weld the segments Total load capacity max. 1,200 tons Steel idlers Idler rollers can be adjusted under load in three axes - Displacement - roller axis: + / - 50 mm - Lifting distance - Height adjustment: 0 to 150 mm - Thrust travel - transverse adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 Load capacity 15,000 kg per track roller Roll diameter 559 mm - Roll width 300 mm Drive torque 2 x approx. M = 3,500 Nm Connected load 3 KW per drive unit Roller infeed manual hydraulic Rotation speed infinitely variable 100 to 2,000 mm/min via hand remote control Second drive un ...
Compressed air tank up to 11 bar, volume 500L
Pressure vessels, compressed air tanks OKS, Otto Klein Stahlblechverarbeitung GmbH 479109 year 2000 operating pressure: 16 bar maximum capacity: 10 litres Dimensions: 470 x 290 x 240 mm
Membrane accumulator with fastening, accumulator ORSTA 25/16 018268204 TGL 10843 Content 25 l permissible Operating pressure 160 bar permissible Operating temp. 80°C Another 25 l - Membrane storage tank from ORSTA under HY 1033 ! Used, as good as new Dimensions 550 x 400 x 360 mm
Lubrication pump with tank VOGEL PMS 5 A Q 57 l/min P 0.1 bar 220 / 400V motor: 0.12 kW Dimensions: 400 x 200 x 375 mm
Membrane accumulators, bubble accumulators, pressure accumulators ORSTA 1/16 0424780 TGL 10843 Content 1 l permissible Operating pressure 160 bar permissible Operating temp. 80°C Dimensions 220 x 117 x 117 mm
maximum number of results exceeded
please refine your search
20 € 
