hopper tank used for sale

Dimensions 150 x 160 x 200 cm. Main outlet diameter 10 cm. 2 valves front and back for draining.

Type: Hopper and Rotary vane Materials: stainless steel (hopper) Nominal diameter: 600 mm. Motor power: 0.37Kw Pneumatic transfer Useful tank volume: 230 L

Type: 3-wheel mobile hopper Emptying: butterfly valve Volume: 250 L Materials: stainless steel Quantity: 9 units

Stainless Steel Heated Hopper for Filling Machine Frequency: 50 Hz Price: on request

Application: Powder receiver filter. Stainless steel unit with external part in stainless steel 1.4301 for feeding and dosing powders by depressurization. This equipment can be used as a hopper in a conveying system where the filters allow the separation of air / product (powder). ASSOCIATED MATERIALS: Aerzen GM7L / Infastaub MKR 0-1/20 - Blower + Filter. 1 - UEB 800 Eco jet filter, vacuum tight Filter surface: 14,0 m2 Filter material: FM02 Depressurisation: 500 mbar ATEX classification Sold with new filters. 2 - 0.4 m3 hopper with tangential inlet. 3 - Level sensor RN 3001A (Atex) Execution : rotary vane 4 - Rotary valve A1 250/10 WC-II Dosing capacity: approx. 3000 kg/h Power: 0,55 kW ATEX classification 5 - Pneumatic closing valve Nominal diameter: 250 mm 6 - Down pipe with compressed air injection system on the sides. 7 - Pneumatic ...

Type : Mobile vessels / containers Previous use : Paint mixing Quantity available : 7 Total volume : 400 L Height inside tank : 900 mm Inside diameter: ? 790 mm Black non-magnetic treated steel

Geroldinger feeding station with electric heating and cell feeder.

Used hopper truck MAC with CMF

Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel

Hopper,plastic,standing in stainless leg frame,Ø 760 mm.

Hopper,plastic,open with lid,standing on stainless leg rack,Ø 750 mm.

Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!

OHK Stainless hopper and screw ModeL: BTO Stainless 300Kg hopper with twin screw discharge, 200mm screw diameter, 3Ph

Winkworth hopper / feeder stainless 100L hopper with single shaft paddle agitator, screw fed discharge, mobile

Concrete distributor company Schwinghammer Austria, year of construction 1995, 12 KW

O&K feed hopper with vibrating channel Brand: O&K Germany Dim. bunker : 6700 x 3000 x 1400 mm. Trough: length 5000 mm - width 1200 mm. Drive: 2 vibration motors of 7.5 kW each Total height feed hopper with vibrating channel: 3000 mm.

- Output: up to max. 30to/h - Motor: 400V, 50Hz - Without electrical equipment Mass: - Length: approx. 2000mm + discharge screw - Width: approx. 1700mm - Height: approx. 1700mm

Capacity: 15 cbm with dosing belt new control box Steel skid frame with approach plate

Capacity: 56 cbm bolted segment construction with discharge chute with sturdy steel construction

Chip hopper, chip trolley, mobile PAGUS approx. 20 litres internal dimensions: length: 630 mm width: 310 mm depth: 50 / 190 mm edge height: 440 mm Material: aluminium ( frame ), Steel ( tub ) 2x fixed castors, 2x swivel castors used, tested ! Dimensions 1080 x 400 x 1010 mm

Pre-Portioner/Hopper Year of construction not known Funnel for approx. 120kg dough Sliding opening 30x60cm Inner hopper height 60cm Funnel dimensions at the top approx. 100 x 100 Funnel height top 250cm Funnel height bottom 190cm Gate valve electrically operated (230V connection) mobile

Granule dryer, granule drying system, granule conveyor, vacuum conveyor -Manufacturer: simar, granulate conveyor vacuum conveyor with 2 hoppers -Type: F2582 -Item no.: 10-02082 -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 870/710/H1430 mm -Weight: 80 kg

- Content: 68 + 7 HL - With vibrating spout - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Hopper height : 1440 mm

ID2713 Feed hopper incl. take-off chute and conveyor belt Feed hopper including discharge chute and conveyor belt Feed hopper including discharge chute and conveyor belt, (1400 mm wide, approx. 110 m long), some straps are still available on a roll Feed hopper incl. take-off chute and conveyor belt (1400 mm wide, approx. 110 m long), belts are partly still available on rollers

Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The documentation (Manual, CE ...

Offer 24083 Specifications: - Capacity 300 L - Load capacity up to 750 kg - Drive-in pockets for forklifts -Tilt - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg

Width 1.4 m Heigth 2m Length 4.5m More then 300 machines new and second hand on our seema .de

Breite 1.2 m Höhe 2m Länge 4.6m More then 300 machines new and second hand on our seema .de

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

brand new - with a capacity of 50,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - white / RAL-9016 shade (sample photo). (Other RAL co ...

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Storage Tanks / Pressure Tanks / Beer Tanks in V2A with cooling jacket Test pressure: 2,86 bar, Operating pressure: 2 bar Volume: 1500 Litres -NEW- Measurment and Weight: Total Height: 2609 mm Cyl. Height: 1500 mm Diameter: 1100 mm Weight: 290 kg Material: V2A (AISI 304) 1.4301 Upper bottom: • with manhole Ø 400 mm with 4 x screw • with 2 eyelets • with ventilation system DN 50 • with CIP-cleaning • with downward drawn filling pipe DN 32 with fermentation connector with overpressure valve, with manometer (on extra charge) Tank cylinder: • with ladder hook up • with cooling jacket h=1000 mm • with sample valve DN 15 (on extra charge, with spiral in stainless steel also available) • with immersion socket for temperature indicator and temperature indicator (on extra charge) • on the back of the t ...

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...

P52 - used approx. 6-10 m³ / 6,000 10,000 litre polyester tank / fibreglass tank, mixing tank, brine tank, aboveground, upright, manufacturer Reich, in good condition. Dimensions: diameter approx. 2.50 m x height 2.50 m Vertically standing polyester tank, mixing tank, with funnel for loading salt or other media, underside completely closed, incl. mixing station. As pictured, could not be examined technically. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

P86 - used appr. 30 m³ / 30,000 litres polyester tank / GRP tank, manufactured by Reich company, aboveground, on two steel bases, in good condition. volume: appr. 30 m³ / 30,000 litres material: polyester / GRP diameter: appr. Ø 3.00 m length: 5.00 m height: 4.30 m including base Storage tank by manufacturer Reich, lying horizontally, aboveground tank on two steel bases, dome on the top of the tank body, multiple connections, in- and outlets, as depicted on the images. The container can be used as a storage tank for many different media such as water, liquid feed or as a rainwater collection tank and much more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this ta ...

P81 - used approx. 6 m³ / 6,000 litres polyester tank / GRP-tank, Speidel tank, aboveground, on 2 steel bases, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / fiberglass length: approx. 2.90 m width: approx. 1.60 m height tank: approx. 1.60 m height total: 1.92 m Manufacturer Speidel, horizontally standing, square, aboveground storage tank, incl. 2 steel bases, dome on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this t ...

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

P75 - used approx. 6 m³ / 6,000 litres polyester tank / GRP-tank, aboveground, vertical, Staffelstein tank, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / GRP width: approx. 1.50 m length: approx. 2.00 m height: approx. 2.80 m Vertically standing, aboveground storage tank, dome on the front side, several in- and outlets, by manufacturer Staffelstein. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Pleas ...

P79 - used approx. 6 m³ / 6,000 litred polyester tank / GRP tank, Juno-tank, aboveground, vertical, on four bases, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / GRP height tank: approx. 2.70 m overall height: approx. 2.84 m width: approx. 1.24 m Manufacturer Juno, vertically standing, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank h ...

GP115 - used approx. 40 m³ / 40,000 litres polyester tank / GRP-tank, Staffelstein tank, aboveground, lying on two steel pedestals, good condition. capacity: approx. 40 m / 40,000 litres material: polyester / fiberglass length: approx. 6.50 m diameter: Ø approx. 3.00 m height including base: approx. 3.50 m Manufacturer Staffelstein, horizontal, round storage tank on two steel pedestals, access on the front side, multiple connections, in- and outlets as shown in the pictures. The container can be used as a storage tank for many different media such as water, liquid feed et cetera, or as a rain collection tank. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this ta ...

GS11 - used approx. 40 m³ / 40,000 litres steel tank, insulated container tank with heating coil, former palm oil tank, in good condition. Aboveground storage tank, lying horizontally, insulated container tank, former palm oil tank. Technical details: year of construction: approx. 2007 total tank capacity: approx. 40 m³ / 40,000 litres capacity at max. filling height: 37,000 liters (decrease due to the insulation) dimensions incl. insulation: h 2.10m, w 2.50m, l 9,50m weight: approx. 7.5 t material: S235JRG2, single-walled steel tank with 80 mm of insulation certification mark: Z-38.11-143 tested pressure inside storage space: 2.73 mH2O other: incl. forklift pockets at the tank bottom and crane eyelets on top for transport, incl. inside heating coil. The container is used, has been emptied and professionally cleaned inside. Corresponding to the age there a ...

GP118 - used 50 m³ / 50,000 litres polyester tank / GRP tank, aboveground, on steel pedestals, in good condition. capacity: approx. 50 m³ / 50,000 litres material: polyester / fiberglass length: approx. 10.70 m diameter: Ø approx. 2.50 m height incl. base: approx. 2.90 m Aboveground storage tank of round shape, lying horizontally on five steel bases or on a steel base frame. Access on the top of the tank body, one DN100-spout at the bottom of the front side, several in- and outlets. Tank has been newly painted, twice in stock. This container can be used as a storage tank for many different media, such as water, liquid feed, whey, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater collection tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not p ...

P132 - used approx. 20 m³ / 20,000 litres polyester tank, GRP tank, Juno tank, in good condition. technical details: capacity: approx. 20 m³ / 20,000 litres material: polyester tank / GRP tank manufacturer: Juno weight: 1.5 tons dimensions: Ø 2.00 m x approx. 6.50 m long / total height including base 2.40 m Used storage tank in good condition, aboveground, incl. steel bases, lid on the front side, several in - and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that thi ...

P123 - used approx. 3 m³ / 3,000 litres polyester tank, GRP-tank, aboveground, vertically standing, on steel frame, in good condition. technical details: capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP manufacturer: Erka dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m Used storage tank in good condition, standing, hatch on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in  ...

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...