hopper tank used for sale

P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...

3,000 litres of above-ground, galvanised waste oil collection container and for other liquids of hazard class A3 (e.g. glycol/antifreeze, etc.) Pick-up or delivery possible. Complete system, but without overfill protection

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

Supply system for sliding ring seals / pressure tank 12L Manufacturer: Fluiten Material: Stainless steel (1.4301) Built: 2000 Volume: 12 L Pressure (max): 16 bar Temperature (max): 99 °C Height: 430 mm (without gauge) Diameter: 219 mm incl. thermometer, gauge and sight glass Condition: new and unused Connections: see drawing Item can be inspected at any time in 76694 Forest by arrangement.

Waste oil collection tank 950 litres approved for liquids of hazard class AI-III With test certificates State: Technically deficialy Optical: According to age

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

Dimensions : - width : 750 mm - depth : 1140 mm - height : 3400 mm - ground clearance : 450 mm - Manhole rectangle 320 x 420 mm - Total emptying: ball valve Ø 40 Friedrich No. 2 - Partial drain: ball valve Ø 40 Friedrich No. 2 - Level - Taster - Dome: Ø 200 - Interior lining in perfect condition - Very little use of tanks

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

Dimensions : - width : 850 mm - depth : 1000 mm - height : 3250 mm - ground clearance : 450 mm - Manhole rectangle 320 x 420 mm - Total emptying: ball valve Ø 40 Friedrich No. 2 - Partial drain: ball valve Ø 40 Friedrich No. 2 - Level - Taster - Dome: Ø 400 - Interior lining in perfect condition - Very little use of tanks

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

1 cool- and heatable, sterilizable, vacuum-resistant stainless steel process tank for the production of dairy, delicatessen, pharmaceutical and cosmetic products Manufacturer: Seitz-Werke, GmbH Type: DB 170. FW Machine. No.: 2226 Content: 187 litres Material: stainless steel V4A / 1.4571 Product-contacted parts polished Product room: pressure-resistant to 3 bar Double jacket for heating and cooling Double jacket: 35.5 litres, pressure-resistant to 2 bar Operating temperature: up to 133 C Ventilation and vent valve Rise tube Pointer thermometer from 0 - 160 C Pressure gauge Safety valve Filling opening NW 60 Bottom seat valve NW 20 Agitator flange available Operating instructions + list of spare parts, etc. Dimensions: approx. 0.8 x 1.4 m Weight: approx. 200 kg Technical condition: used, excellent as good as new operating condition

30,000 litre extinguishing water tank according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPRENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, Rain retention tanks, cisterns, etc. - Factory new - Dimensions: D = 2.00 m - L = approx. 10.00 m - weight approx. 6.2 to. With welded dome shaft approx. 800mm high, as well as a walk-in cover, galvanized + tagwaterproof. For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection. Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...

tank plant, fuel oil tank, service filling station, diesel filling station, steel tank with 50,000 litres capacity - brand new - according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is connected to the following Fittings equipped: 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 to. - ex works, freely charged - We recommend: Above container from the outside sandblast, ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer  ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...

Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Storage for wine, beer, sparkling wine, water, fruit juices, fats, oils, etc. Content: 60 litres Dimensions and weight: Ges.Height: 760 mm Diameter: 370 mm Weight: 40 kg Material: V2A - AISI 304, 1.4301 Surface: Inside and outside 2B=III C Tank top: with manhole round DN 230 with 1 x handle Underbody: with residual drain with disc valve DN 25

both tanks identical / Pressureless / 24 m3 content . were used for glue (consistency such as paste ) can also be sold individually. (Price / Stk .

Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking:  ...

4.5 m3 stainless steel container . was used as a template of a well system .

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Storage tanks/ stainless steel tanks without pressure Volume: 10.000 liter UNI-FIN-FOR Measurement and Weight: Diameter approx. 2.050 mm cyl. Height approx. 3.000 mm Total height with feet approx. 4.540 mm Year: 1992 Material: Stainless steel, 1.4301 Wall thicknesses: sub-floor 3 mm, cylinder + upper floor 2.5 mm Tank with conical bottom Upper body: 2 crane eyes 1 flange connection DN 65 1 ventilation nozzle DN 100 with bend Cylinder tank: 1 manhole 440 x 340 mm at the top: 1 socket ¾ " Lover bottom: 1 outlet spout with bend pulled forward NW 40 Otherwise see photos and drawing

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

lying, insulated stainless steel tank with 2 concrete brackets (25 m high) Volume: 20 m3 Dimensions: 3.30 m x 3.00 m long

lying aluminium tank with inner coating with consoles Volume: 20 m3 Dimensions: 2.0 x 6.70 m long

Steel tank with inner coating (glass enamel) can be used above ground or underground Volume: 8.4 m3 Dimensions: 2.20 m x 2.50 m long

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns pressureless, standing Content: 30,000 litres Available: 4 pieces UNI-OFF-FOR B. No. 20-137 GL internal epoxy resin-coated steel containers (wine tanks) Dimensions: Diameter approx. 3,000 mm Zyl. Height approx. 3,820 mm Total height with feet approx. 5,000 mm Containers with curved floors Wall thicknesses: sheath 9 mm, floors 10 mm on top floor in the middle: 1 block flange DN 50 on the coat: 1 manhole 450 x 350 swivel 1 flange trim NW 40 2 Block flanges NW 20 in the middle of the underbody: 1 block flange DN 65 otherwise according to sketch + photos

Storage Tank in V2A for wine, water, fruit juice, schnapps Capacity: approx. 1.200 liter Measurement: Total Height: 1730 mm Depth: 1150 mm Cyl. depth: 1000 mm Width: 730 mm Material: V2A Surface: Outside marbled, 2B=IIIC inside 2B=IIIC Upper body: With thread connection DN 50 Cylinder tank: With 1 manhole With level indicator with bar and scale Lower bottom: With outlet pipe pulled forward with butterfly valve DN 32 With 4 stable feet

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...