homoge used for sale

Inline homogenizer new condition LWH: 1550 x 600 x 600 mm

Usable volume: 1400l, melting kettle capacity: 90l, with anchor agitator and a homogenizer, for heating and cooling, was mainly used for the production of lotions, an on-site inspection is possible.

EKATO UNIMIX LM 4,5 laboratory vacuum and homogenizing mixer for the manufacture of cosmetic and pharmaceutical products such as emulsions, suspensions, creams, lotions and pastes, capacity from 1,0 to 4,0 litre, anchor stirrer with side and bottom scrapers (50-210 RPM), homogenizer/dissolver (8000-24000 RPM), jacketed for heating/cooling, usable for vacuum, maximum internal working pressure -1/+2 bar, maximum working pressure jacket 6 bar, maximum internal temperature 133 ºC, maximum temperature jacket 150 ºC, lid-lifting device, temperature control system, electrics 220V; 50/60 Hz, maximum power 3 kW.

roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: Hydraulisch total power requirement: 150 kW Condition used, refurbished, Specification Roll mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - Variable friction ratio between rolls - cored rolls with central chamber for water cooling - nip adjustment: NEW hydraulical - hydraulic unit: NEW - tipper guiding plates - cylinders: mounted on bronze bushings with forced oil lubrication by pump, new rotary joints for connections to water circuit - N.2 safety brake for emergency stop - N.2 AC engine 75 kW – 380 V – 50 Hz - mill tray to contain compound - bi-directional bars for safety system - visualization display to monitor gap between rolls and engine speed - electric cabinet: with PLC system NEW - N.2 i ...

roll diameter: 600 mm roll length: 1800 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch 0 total power requirement: 132 kW Condition: used, completely overhauled, with warranty Specification: Rolling mill 600 x 1800 mm - second-hand Monoblock model - motor under the rollers - Roll diameter: 600 mm - Roll length: 1800 mm - Roll core with central chamber for water cooling - Friction between the rollers - hydraulic gap adjustment: new - Hydraulic unit: new - Tilting guide plates made of steel - Rollers on bronze bearing bushes with recirculating oil lubrication via pump - Rollers with new ball slewing rings, make Maier, for connection to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - Safety brake for EMERGENCY STOP - Stainless steel roller container to hold the mixture - bi-directional safety bars - Visual indication of the gap between rolls  ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.

foil width: 1400 mm max. speed: 250 m/min Diameter of the holes: 0,3-2,8 temperature: 400 °C heating capacity: 37 kW Control: Touchscreen Perforation machine (Star_2) with unwinder and rewinder (MTX_03 touchscreen) Machine is new, used less than 100 hours. HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles. The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps. This technology creates homogeneous holes and was developed in the 1980s. An industry standard wiring closet system with Wifi modem (purchased separately and configured), for wireless connection to any existing inline production system. User-friendly and multilingual control panel with additional buttons/knobs for manual operation. Intelligent Web Guidance System : For precise control over p ...

Mixer 250 liters double shaft with paddles - brand new! The machine has 2 motor-reducers reverse ×1.1 kw or a total power of 2.2 kw. Main characteristics: Designed for homogeneous mixing of food products; Made entirely of stainless steel; Completely silent mixing process; Two working augers with paddles; 2 new front unloading flaps; Easy cleaning of the machine; Built-in two silent motor-reducers of the highest class; Safety cover with limit switch; Built-in electric part with moisture-proof buttons; Reversible mixing system in both directions; Capacity: 250 l.; Installation power 2.2KW, 400V, 50Hz;

// New equipment - never been used // Technical details Manufacturer : IKA Werke GmbH Model : UTL 2000/05 Type : Inline disperser / Mill, dispersing machine high shear Rotor speed : 5800 rpm (possible variation) Max product temperature : 160?C Viscosity (max.) 5000 mPas Max permissible overpressure: 16 bar Max permissible temperature of the double jacket: 120?C Max. permissible overpressure in the jacket: 2.5 bar Max. flow rate (standard operation / product: water): approx.2500 l/h Motor power: 5.5 kW Material in contact with the product : Stainless steel 316 Barrier pressurisation system Design: https://www.osertech.eu/wp-content/uploads/2022/02/IMG_9885.jpeg Use and operation The IKA ULTRA-TURRAX UTL 2000 is a high performance single stage continuous dispersion machine (rotor/stator), used for the production of emulsions and suspensions. The UTL single-stage d ...

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Explosion proof motor 3 KW (ADF / ATEX: EExdellCT4) 2870 rpm IP 55 Turbine D.125 Volume, max. with H2O): 5000 l Viscosity, max. 15000 mPas Process pressure (max.) 0 bar Vacuum, max. 100 mbar Process temperature, max. 120 ?C Mixing tools Propeller Motor power, standard 3 kW Shaft size D.40 X L.1000 Weight approx. 42 kg New sealing cartridge installed (seals, ...) The IKA ROTOTRON? RT is an all-purpose jet-flow agitator used for homogenizing, dispersing, suspending, emulsifying, aerating, dissolving and improvement of heat transfer. The RT is most effectively used for tasks ranging between that of a conventional stirring machine and a dispersing machine with a rotor-stator system.

Complete farm dairy for filling milk, yoghurt and butter with fully automatic fillers for gable boxes with screw caps and 95mm yoghurt pots Machines were completely overhauled a few years ago and are in very good condition. Included are: - Milk pasteurizer 1000 liters/h (continuous pasteurizer 93% Heat recovery) including pumps, controls, temperature recording - Homogenizer 1000 liters/h - Centrifuge 1000 liters/h - 2x coolable buffer tanks (whole milk, low-fat milk) - Nimco 550 milk filler with screw cap applicator. Output max. 2500 packs/h, currently set to 1500 packs/h - Cream / yoghurt pasteurizer 300 liters/h (continuous pasteurizer) with Electric heating including pumps, controls, temperature recording - Homogenizer 300 liters/h - Buffer tank 600 liters - 2x yoghurt tanks 600 liters double jacket heatable and coolable - yoghurt pump (worm pump) - Yoghurt filler ...

Eirich mixer granulator 3000 liter capacity Semi-mobile body with 4 hydraulic supports with low-bed low-loader transportable approx. 27 tonnes. Container drive 2 x 22 KW Whirler drive 160 KW Water and chemical dosing Mixer weighing Hydraulic unit Compressor Complete factory control for feeding and discharging conveyor belts Machine was used by us for the production of cat litter i.e. Various wet and dry components were weighed and then slowly homogenized and then granulated with different differential speeds to a stable granulate 1-5 mm. The system includes a complete control system.

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

A high quality, technologically advanced machine designed for kneading dough. The mixer automates the process of kneading any type of dough to obtain a homogeneous mass. Technical data: stainless steel bowl and spiral, Max. flour quantity: 75 kg, max. dough quantity: 120 kg, 2 speeds; 2 timers, automatic changeover from first to second speed, inverted bowl rotation.

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Pasteurizer: Manufacturer: FISCHER Year of construction: 1998 Three sections Capacity: 1000 l/h Homogenizer Manufacturer: ASTRA Year of manufacture: unknown Capacity: 1000 l/h Milk cooling tank No. 1 Manufacturer: Etscheid Capacity: 2000 l Milk cooling tank No. 2 Manufacturer: Etscheid Capacity: 1500 l

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Paste mixer Manufacturer : MTI Type: P-10ADO Output: usable volume 11 litres, nominal volume 15 l Technical specifications : The paste mixer is suitable for mixing, homogenizing, dispersing and suspending low to high viscosity products, externally heatable up to 65 °C and vacuum-proof Heating cooling jacket 5 bar Product space 0.75 Equipment: Machine stand Gearbox suspension with drive motors flanged Weelen bearing with container lid and mixing tools Mixing Squeezing device Electrical control Metrics: Length 1210 mm Width 1180 mm Height 1925 kmm Weight 1700 kg

Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With suction device and table The upward-opening door keeps the hot surface away from the user Gently self-closing door (for 5, 13, 21 & 23 litre models) Standard start-up delay and process timer function Durable alumina backing plates for the heating elements; Robust door frame and base plate High-quality fiber insulation with low thermal mass Powerful heating elements on both sides ensure very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing More items new and used - you can find them in our shop! International shipping costs on request!

• Vacuum mixing, dispersing and homogenizing plant • Mixing vessel useful volume 65-250 l, vacuum proof -1/2 bar, perm. operating temperature 138°C, double jacket • Lid hydraulically liftable/lowerable • Homogenizer in the bottom of the vessel, enables suction of liquids and powders, output 9 kW, speed 1,000-3,000 rpm • Counter-rotating planetary agitator with scrapers, output 7,5 kW, speed 7.5-75 rpm • Transfer and discharge piping • CIP cleaning • Vacuum and cooling/heating by external supply • Product contact parts made of 1.4571/AISI 316 Ti • PLC Bosch CL300 • Screen with membrane keypad • Various new gaskets as accessories • Drive 230/400V/50Hz

VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 75 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator while coat ...

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

? Suitable for homogenising for aqueous products. ? Viscosity 100 mPas, density 900 - 1,100 kg/m3 ? Speeds 77-769 rpm ? Power 0.05 - 0.55 kW ? 2-bladed trapezoidal agitator diam. 210 mm, shaft length 800 mm ? Parts in contact with product shaft and stirring element made of mild steel St. 37, coated Halar E-CTFE (equivalent to PTFE) ? Equipped for 300 l drum, diam. 750 mm, height 800 mm (drum not included) ? Agitator height adjustable by hand crank ? Lifting height from lower edge of agitator bottom 450 - 1,050 mm ? Agitator can be tilted by hand crank ? Drive 400V/50Hz

VM VG1-VN VOGA MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 70 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator whil ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

The equipment presented is a weighing line equipped with a weighing machine type VPV45 Duo, it is composed of the following elements: - An elevator belt type goose neck type - An oscillating feed belt - One WEIGMA multihead weigher with double head vibrating lane 2 VPV45 (two channels) - A screened enclosure, with a wicket door access - A touch keyboard to program the weigher - A remote control panel - A remote emergency stop box - A double chute goes up and down - A supply item such as tray - A step-by-step conveyor belt - An electrical cabinet - A checkout support trolley The machine was used very little. Documentation, certificate of conformity, food certification available. The weight range of the weigher is from 10 gr. to 2000 g. The scale is designed for homogeneous size products with a maximum length of 55 mm. The weigher can reach approx 25 weights per minut ...

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet. - 06.B21 robot connection according to Euromap 67 - 06.D10 charging zone temperature set from the level of the control system 4. 06.K40 Quality table 5. 06.K01 Graphic functions of a ...

Almost brand new homogenizer for stabilizing dairy / non -dairy products, juices, smothies, etc. Productivity - 500 l/h Homogenization stages 2 stage with pneumatic control Viscosity < 500 cps Maximum inlet particle sizes < 500 microne Steel AISI 304 Plungers 3 Pressure 0 - 40 Мpa (400 bar) including Inlet pressure 0,3 - 0,6 Mpa ( 3 - 6 bar) Max outlet back pressure up to 10 bar Compressed air Min. 5 bar, clean / dry, temp. ≤40°С Max working temperature < 100 ° С Max t° washing < 90 ° С Max t° sterilization < 145 ° С Motor power 11 kw, 3 + 380 V, 50 Hz Weight 650 кg Size 1200 х 800 х 1000 mm Noise level Max 60 db Cooling water consumption Max 80 L/hour

Manesty Betapress Rotogran oscillating granulator, used but in good condition. Used Rotogran separator with hopper and rotor in stainless steel. The granulator has the task of sifting the powder introduced into the appropriate collection hopper placed at the top. The sieving operation allows to obtain a powder with homogeneous granulometry (the size of which depends on the size of the assembled mesh), which can then be used in the manufacture of tablets. The sieved powder is collected in a special container, a rigid container or a bag, placed under the conveyor. Italian manual included.

Total Volume : 745 liter Batch size : 65 – 500 liter It is useful for hair dye, cream etc in cosmetic industry. It is an automatic multi-purpose mixer with 500 liter capacity. it is a complex machine that offers a special solution for manufacturers who want to manufacture uniform with special homogenizer, special design scrapers and high speed. The maintenance has been done and no problem in operation. The machine has never used new original spare parts with a value of over eur 20,000. spare parts; packing felt vacuum ball mixer tungsten carbide shaft bearings oring and gaskets bearing sets boiler scrapers triger belt set selenoid valve thermocouple sensor kit plc eeprom card vacuum module temperature manometer tank replacement of gliser / also, the system will be given with all the equipment and spare boilers including the photo. mil handle miscellaneo ...

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

We offer for sale a brand new high-speed dual planetary mixer with a working volume of 300l, blade rotation speed 0-72rpm, homogenizer speed 1450rpm and squeegee speed 40rpm. The operating time of this machine is a maximum of 20 months. The machine was used in the prototype process for the production of the BMC mixture.

Fermenter V=200 L is a process device (steel) designed for the food industry. Enables: - mixing and homogenization of food substances, - heating/cooling (water), maintaining a constant temperature. The device consists of: • tank; • removable top cover; • anchor agitator with scrapers (drive power: 1.5 kW, max speed: 39 rpm, min speed: 3.9 rpm) • homogenizing mixer (power: 7.5 kW, max speed: 5800 rpm, min speed: 1000 rpm • two washing bowls connected by a collector with the tanks bypass; • product temperature sensor; • heating medium level sensor (water); • two electric heaters; • manual flap valves; • bypass; • a sight glass with a lighting lamp and a wiper; • double mechanical seal (homogenizing mixer); • inverters for all drives mounted in the control cabinet; • installation supplying tap water to th ...

Weiss climatic test chamber with humidity -72°C to +180°C approx. 335 liters WK3-340/70 Already upgraded to the new R452A refrigerant Here we offer a Weiss climate test chamber. Air-cooled Temperature Testing Volume 335 liters Test Chamber Dimensions: Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature –72°C Maximum temperature +180°C Temperature change speed, cooling 3 K/min Temperature change speed, heating 3 K/min Temperature deviation, timed ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ±1.5 K Climatic test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ±1 K Moisture deviation over t ...

Laboratory mixing and homogenizing plant with 2L usable volume, machine incomplete

Memmert VO500 PMP500 Vacuum Oven 101L Peltier Thermoshelf 200°C Heating concept specifically adapted for a precise and homogenous temperature control Up to 40 ramps with different temperature and vacuum setpoints can be programmed either directly on the controller or using the Memory-Card. Volume 101 l Dimensions w(A) x h(B) x d(C): 545 x 465 x 400 mm Max. number of internals 2 Max. loading of chamber 60 kg Max. loading per internal 20 kg Textured stainless steel casing Dimensions w(D) x h(E) x d(F): 710 x 760 x 550 mm Housing rear zinc-plated steel Voltage Electrical load 230 V, 50/60 Hz approx. 2400 W Ambient temperature +5 °C to +40 °C Humidity rh max. 80 %, non-condensing Overvoltage category II Pollution degree 2

Carbolite Gero AX120 Heating Oven Original price 4561 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 128 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 26 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 495 x 500 x 520 External dimensions H x W x D (mm) 640 x 790 x 665 Load per grid/total 10/40(kg) Air change per h 14 Max. power (W) 2000 Holding pow ...

Carbolite Gero AX60 Heating Oven Original price 3844 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 66 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 25 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 395 x 400 x 420 External dimensions H x W x D (mm) 540 x 690 x 565 Load per grid/total 10/30 (kg) Air change per h 28 Max. power (W) 1500 Holding powe ...

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

USED UNTHA SINGLE SHAFT SHREDDER 60 kw, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder mot ...

Pasteuriser for Milk 12,000 L/h Make : Fisher Model: E43 CFG Y.o.m : 2009 Capacity : 12,000 Litres Outlets : Separator & Homogeniser Thermal Circle : 4-45-65-75-4 Skid Mounted Condition : Very well maintained

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar