holz used for sale

Cutting length 4100 mm, further data on request

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 °, 2800 mm, 1000 mm

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm ...

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Key data: 45 °, 1600 mm, 1000 mm

Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover

Key data: 5300 mm, 2100 mm

Power sawing unit 4.6 kW Cutting length 5300 mm Cutting height 2100 mm Cutting depth 80 mm Total machine height 2900 mm Strip attack Weight approx. 700 kg Saw blade Ø 300 mm Hinged rail

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

Key data: 45 °, 2600 mm, 500 mm

400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - / Contact us at -

Wood Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm (6mm) edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 15° Scraper unit for chamfers and radii Surface Scraper Unit - Finish Machine is CHECKED in TOP CONDITION from very well maintained craft business from stock Lieboch

The scope of delivery includes: 01x Wooden beams, used Species: Spruce / Fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | Pcs.: approx. 25.67 kg The price shown corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 4100 mm, 80 mm

Holzma Panel Saw Cutting Length 4100mm Cutting Depth 4500mm with Vorritz Agregat Machine works perfectly

Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991

Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: Holz-Her Fräsständer, for left machine side: links, Number of motors: 2, kW-Leistung : 2,2, Drehzahlen U/min : 11600, Horizontal Rollentastung : yes, Vertical roller sensing: yes,

Manufacturer: Holzma, Type: Digimatic,

Manufacturer: Holzma , Type: HPL 380 43/22, Year: 2010, Optimisation: yes, Max plate format mm: 4300 X 2200, Min-max plate thickness mm: 6-40, Cutting lenght mm: 4300, Working hight mm: 95, Vorschub Sägewagen : 150, Pressure beam control: yes, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 380, Number of clamping tools: 7, Feeding from back side: yes, FREE TEXT: Spannsystem Sägeblatt Powerlook/Voritzer gesteuert für Postforming Platten, Year :2010

Manufacturer: Holzma, Year: 1997, Optimisation: no, Max plate format mm: 3800 X 3100, Min-max plate thickness mm: 6-60, Work piece length min-max mm: 3800, Work piece width min-max mm: 3100, Saw blade protrusion: 75, Vorschub Sägewagen : 80, Min-max feed programming slider m/min: 60, Saw Blade Diameter mm: 380, Number of clamping tools: 6, Main engine kW: 7,5, Work piece length min-max mm: 3800, Work piece width min-max mm: 3100, Year :1997

Manufacturer: Holzma, Type: HPP 81/42, Year: 1994, Program: Holzma, Cutting lenght mm: 4200, Working hight mm: 85, Vorschub Sägewagen : ca.100, Min-max feed programming slider m/min: ca.80, Angle pressure fixture: yes, Saw Blade Diameter mm: 450, Number of clamping tools: 6, Main engine kW: ca.12,5, Feeding speed continous adjustable: yes, Feeding from front side: yes, Feeding speed continous adjustable: yes, Year :1994

Key data: 45 °, 3200 mm, 1450 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

Manufacturer: Holzma , Type: HPP 82/43, Year: 2001, Program: CADmatic, Work piece length min-max mm: 4300, Work piece width min-max mm: 4250, Working hight mm: 95, Vorschub Sägewagen : 5 - 125, Min-max feed programming slider m/min: 125, Network-capable: yes, Saw Blade Diameter mm: 380, Main engine kW: 13,5, Feeding speed max m/min: 5 - 125, Scoring Aggregate : 2,2 kW, Label printer: yes, Work piece length min-max mm: 4300, Work piece width min-max mm: 4250, Feeding speed max m/min: 5 - 125, Year :2001

Manufacturer: HolzHer, Type: 1411-1, Year: 2001, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 230, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11, Glue system granulate/cartridge: Patrone, Buffing unit: yes, Machine lenght mm: ca. 4.100, Wight approx. kg: ca. 1.100, Year :2001

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: HolzHer, Type: Sprint 1310, Year: 2006, Edgeband height max mm: 45, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 10, Mitre stations: yes, Glue system granulate/cartridge: Patrone, Mitre stations: yes, Radiusfräsen : yes, Buffing unit: yes, Top pressure belt/roller: rolle, Compressed air bar: 6, Machine lenght mm: 3, Year :2006

Key data: 2 kW, 4 kg, 14 kW

Holzma HP72 Optimat - Horizontal sizing saw Brand: Holzma Type: HPP82/43/43 Optimat M-No.: 0-240-0 Year of Make: 2001 Control with Cadmatic Holzma CAD Matic Optimization Junior Cadmatic – on line Total connected load: approx. 26 KW Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 95 mm Saw height: 82 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 7 Program Trolley Feed: Step-Free Air cushion device 4 pcs. Table dimensions: 3 (1,760650) + 2,170650 mm Suction nozzle diameter: 250 mm Extraction volume: 5000 m³/ h

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

SPECIFICATIONS: Workpiece thickness: min. 6 mm - max. 45 mm Edge thickness: max. 3 mm Feed: 8 m/min COMPOSIZIONE: Gruppo rettifica Gruppo colla Gruppo pressore Gruppo intestatore doppio Gruppo raschia colla Gruppo refilatore Gruppo arrotondatore Gruppo raschiabordo Gruppo spazzole

Wood Her STREAMER 1057 XL FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Scanning nozzle Workpiece height 6-60 mm car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Buffing unit Spraying device in the inlet and outlet area as well as PU Machine with all machining tools Machine is WORKSHOP TESTED  First  ...

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Rental: Wooden crate for transport EOS M270/M280