holz used for sale

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

Table dimensions: 850 x 300 mm. abrasive belt width: 150 mm. abrasive belt length: 2510 mm. abrasive band speed of 16 m/s. Ver ? laipsn suportas angle is 90. Engine power: 2.1 kW. Stakl ? weight: 148 kg. Made In Austria.

Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...

Motor power: 2,25 kW. Output: 3880 m3/h. Diameter of connection hole for aspiration pipe: 3 x 100 mm. Bag capacity: 2 x 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 64 kg.

Motor power: 1,5 kW. Capacity: 2480 m3/h. Diameter of connection hole for aspiration pipe: 100 mm. Bag capacity: 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 51 kg.

Edge Abkappen thrower HolzHer Built in 1978 Weight approx. 220 kg L x W x H: 80 x 60 x 150 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

0: 4 St. 0: 120 mm Feed speed: stufenlos, 3-18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg

0: 3 St. 0: 80 mm Feed speed: (4 Stufen): 4/8/9/18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOLZMA HCV 11 Angle Center Double Angle Panel Saw Cutting length 4.300 mm Bevel cutting length 2,200 mm Lift width 2,200 mm Number of Grub Teeth 13 Feed rate max 125 m/min Stepless feed Saw Table Top Allowance 125 mm Saw top diameter max 450 mm Main motor 18 kW Undercutter Yes Postforming scoring machine Loading with vakkum jack Feed table rear Yes Turntable in machine table For delicate items Yes Left Stop Page HOLZMA Central pressure device for angle setting Waste flap HOLZMA Electromagnetic Measurement System HOLZMA Power-Lock HOLZMA Soft-/ Postforming VVSH HOLZMA Integrated Face Cutting HOLZMA Two-finger clamp HOLZMA CADMATIC control Other offers - click - Gabiani Biesse Giben Panhans Schelling Meyer Holz-Her Scm Holzma Rema Scheer panel saw loading panel cutting table saw sheet package sheet machining center plate machining center nesting automatic efficie ...

Type MTY 8-70 Grinding wheel motor 250 W. Sawblade diameter 80 – 700 mm. Diamant grinding wheel diameter 125 mm. Total weight 29 kg. Video: abc://abc.youtube.com/watch?v=kYPLaZZwVtA&feature=youtu.be

VERTICAL PANEL SAW type HOLZHER 1255 second hand machine volt. 380/50 max. working length mm.5300 max. working heigth mm.2200 CE mark : Yes

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Dimensions (L/W/H): 570x490x1720 mm Weight: 90 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 620x560x1720 mm Weight: 110 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Type MS 7000 For grinding blades up to 630 mm lenght. Included cooling system in set. Grinding disk diameter 100 mm. Inner diameter 20 mm, 2800 rpm. Motor power 0,55 kW. Easy and efectively working blade holders. Machine weight 65 kg.

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

Transport box, wooden box, assembly box -Dimensions inside: 590/1490/H500 mm -External dimensions: 730/1620/H680 mm -Weight: 74 kg

Workbench, work table, assembly bench, assembly table, work table, wooden workbench table -Workbench:Wooden workbench table -Width: 1800 mm -Depth: 800 mm -Height: 850 mm -Quantity: 2 pieces -Price per piece -Weight: 30 kg

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper

Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK -Art.No.: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Flush milling machine HolzHer UF 362 Year of construction 1975 L x W x H: 150 x 80 x 160 cm Weight approx. 440 kg The machine is in good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, Roofing nails, nail rolls, 1 carton/ approx. 7200 pieces -Type: 3.0x22 A2 stainless steel -Price/Sale: complete -Dimensions: 490/300/H140 mm -Total weight: 12.6 kg

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Max Machining Dimentions : 3200x1190x70 mm Min Machining Dimentions : 200x70x8 mm Drilling head 15 spindles include sawing unit in X direction Linear tool changers 6

Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117