holland lift used for sale

hydraulic motor, oil motor, hydraulic pump -Manufacturer: GSL (German Standard Lift), Hydraulic pump for driving work platforms -Type: 730-0080-130-002 -Drive shaft: Ø 25 x 40 mm -universally applicable -Number: 1x engine available -Price: per piece -Dimensions: 240/135/H130 mm -Weight: 13.2 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 480 mm -Type: E030ZM2 R 16 -Piston rod: Ø 30 mm -Hole: Ø 24 mm -Dimensions: 545/82/H60 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), Hydraulic cylinder: 480 mm -Type: E030ZM50479 S 49 -Piston rod: Ø 30 mm -Hole. Ø 20 mm -Number: 3x cylinders available -Price: per piece -Dimensions: 605/100/H80 mm -Weight: 6.8 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV30290 S46 -Stroke: 290 mm -Piston rod: Ø 50 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H220 mm -Weight: 38 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D0630320LV2S01 -Stroke: 95 mm -Piston rod: Ø 32 mm -Hole diameter 30 mm / hole spacing 290 mm -Dimensions: 340/117/H105 mm -Weight: 8 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm -Weight: 4.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV70290 -Stroke: 290 mm -Piston rod: Ø 50 mm -Pipe Ø outside: 135 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H240 mm -Weight: 38 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV90185 -Stroke: 185 mm -Piston rod: Ø 50 mm -Hole diameter 40 mm / hole spacing retracted 415 mm -Dimensions: 485/160/H145 mm -Weight: 29.1 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), single-acting hydraulic cylinder, stroke 170 mm -Type: E0400180H30020 T17 -Piston rod: Ø 18 mm -Tube: outside Ø 50 mm -Hole: Ø13 mm -Dimensions: Ø 50 x 275 mm -Weight: 2.9 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: GSL German Standard Lift, 5-hole steel rim -Type: 6.50F-10 ET-17 604700 -Hub bore: Ø 67 mm -Bolt circle: Ø 112 x 15 mm -Quantity: 8x rims available - Price: per piece -Dimensions: Ø 298 x 195 mm -Weight: 7.7 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 50 mm -Pipe outer diameter: 75 mm -Stroke: 500 mm -Total length when retracted: 730 mm -Piston rod mount: Ø 44 mm ball head -Hole diameter: Ø 30 mm -Quantity: 5 available -Price: per piece -Ideal for building a hydraulic press

Vacuümhefunit - Type: V01174 - Maximaal hefvermogen bij 60% werkvacuüm: 1650 kg - Gewicht: 700 kg - lengte: 10,3 meter - breedte: 500 mm - hoogte: 950 mm

A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

General SKU349U858 MakeServolift LocationBarneveld CEcheck TypeHF 250 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information No.10815 Year of construction2003 With switchcheck Floorspace0,65x0,67 m Total height4 m Weight650 kgCatalysts & fillersFeed additivesPaper & otherLifting/tilting machinesSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes  ...

Auction-ID: A1-45633-4

Auction-ID: A3-43516-5000

Equipped with: Front weight, front linkage, front PTO, 1x double-acting hydraulic valve front, power connection front, thru-axles, adjustable K80 tow bar, hydraulic top link, suspended cabin, 4x double-acting hydraulic valve rear, load sensing, air system, air brake connection, Car comfort suspension seat, electrically adjustable mirrors, climate control, iso-bus connection, GPS receiver GPS sphere, radio, president, display, Engine: FPT NEF, 6-cylinder, Cylinder capacity: 6.7 L, Speeds: 540 / 540E / 1000 / 1000E, Hydraulics: Closed Centre Load Sensing (CCLS), Pump capacity: 121 l/min standard, 465L tank, Rear linkage: up to approximately 6,100 kg, Front linkage: ±3,700 kg Auction-ID: A1-40133-2

cab suspension, 540/1000 pto rpm, hydraulic car brake valve, pick-up hitch, thru-axles, with English registration documents available Auction-ID: A1-40133-35

Equipped with 6-Cil. \"Ford\" diesel engine; Range Command ABC + creep; transmission; PTO: 540/540E/1000; 4 double-acting hydraulic valves; hydraulic brake valve; depressurized return; adjustable tow bar; lower drawbar; fender control; 1 double-acting front hydraulic valve; Auction-ID: A1-40133-43

Spark Holland Autosampler HPLC LC Bischoff 816 Untested Auction-ID: A7-45427-137

NEW HOLLAND 654 CropCutter Round Baler – 1998 New Holland round baler, type 654 CropCutter, year 1998. Machine equipped with cutting system (CropCutter), wide pick-up, PTO drive (cardan present). Serial Number: 955058 Weight: ± 2.730 kg Number of bullets: unknown Visual condition correct for age. Normal wear and tear, surface corrosion and some impacts/deformations on the rear plates. Machine stored outside. Auction-ID: A3-43510-33442

Equipped with completely new FPT engine with 0 hours on the clock (documentation available) and new tires all around 6 cylinder FPT 115HP engine 4x double-acting hydraulic valve rear PTO speed 540/1000 with eco mode speed on dashboard does not work properly equipped with new torsion damper, gearbox calibrated and sensors replaced (documentation from available) attached photo of new engine during replacement Auction-ID: A1-40134-25

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40134-81

Equipped with: air brakes, low pressure return, air suspension seat, PTO control on fenders, bonnet lights, high mounted driving lights, suspended cab, 120Amp alternator, stage 5, CCLS pump large capacity, lifting cylinders EDC 90mm, CAT 2/3 quick catch hooks, climate control, joystick 3 buttons RHS, sliding frame coupling 32mm + piton, windshield wiper with rear washer, engine speed management, KL4 sprung front axle, trailer brake valve 2 lines, front linkage, stabilizer rear lifting arms, passenger seat, rotating beacon, center mounted valves NC4MRV (2NC + 2C), multicontroler armrest, automatic PTO 540/540E/1000 + 21 splines, batten, road and work lights, de luxe-pack, dynamic front mudguards, 2 telescopic mirrors, fuel tank 263L, 40Km/h 17x16 economy, radio with bluetooth, 2 electr. Mid mount valves, 8 LED high power lights, . Auction-ID: A1-40134-3

PTO speed 540/1000 with eco mode 4x double-acting hydraulic valve rear 1x double-acting hydraulic valve front speed 50Km/H equipped with 6.7 liter 6 cylinder diesel engine with 180Hp Auction-ID: A1-40134-24

Manufacturer: New Holland Type: t3 Category: Agricultural Tractor ROPS structure: SLTV3 (CE certified, tested by OECD/OSHA/SAE). The existing safety structure nameplate provides information on axle loads and permissible towing loads, which allows the tractor to be classified in the medium performance segments. Technical data (according to nameplate): Front axle load: 2200 – 2850 kg Rear axle load: 4600 kg Permissible towing capacity unbraked: 3700 kg With overrun brake: 8000 kg With independent brake: 6000 kg With assisted brake: 21000 kg Weight: Permissible total weight: approx. 7000 kg (derived) Net weight: not known Condition: Visually used condition with usual signs of wear Technical condition not checked Equipment: Roll-over protection (ROPS) available Notes: Arrange transportation by buyer Solid tractor for farming, farm operation or as  ...

Battery empty. Auction-ID: A1-45690-12

Mec 2047ES Scissor Lift 4 x new Crown Deep Cycle lead-acid batteries CR-225 HD (as of 06.10.2023) Brand: MEC Model: 2047ES Type: Scissor Lift Year of construction: 2006 Working height max. 8.10 m Platform height max. 5.98 m Platform height – retracted 1.62 m Platform extension 0.91 m Platform width – outside 1.15 m Platform length - outside 2.31 m Platform length - extended outside 3.39 m Railing height 1.10 m Height of skirting board 0.15 m Height – retracted: Folding railing 2.10 m Height – retracted: railing folded down 1.62 m Length - retracted 2.51 m Length - with extended platform extension 3.33 m Width 1.19 m Achievement Max. people on the platform (indoor/outdoor) 2/2 Load capacity 567 kg Load capacity - platform extension 113 kg Movable up to a height of 5.98 m Travel speed - retracted 4.0 km/h Travel speed - extended 1.0 km/h Gradea ...

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Hydr. Scissor lift table WEIDMANN type E5/13-1Fabr. No. 30403339 Year of construction 1982 / 2007Load capacity 500 kgPlatform size 2000 x 1200 mmStroke max. 1280 mmOverall height - table bottom 290 mmOverall height - table top max. 1570 mmTable height with safety support 1430 mmLifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 barEngine power 1.5 kWNex connection 400 volts, 50 Hz.- Rotary switch switch on the hydraulic power unit for up and down lowering speed

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-

BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3

Battery empty. Auction-ID: A1-45690-4

Battery empty. Auction-ID: A1-45690-2

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BeUnCendmDs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45450-306

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/RjFS2NQ29J4 - Former Linde full-service device - valid service until 03/2027 - UVV valid until 03/2027 - Battery: 09/2014, 24V Ah, good performance measured with 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45450-333

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/mC3Ktrhu2oE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 06/2021, 24V 3PzS 375Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45450-364

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

Load 150 kg

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

HIDRAL EH-1500 goods lift was manufactured in 2013. The steel-framed goods lift is used in halls and warehouses where the transport of heavy goods between floors is needed. Powered by a hydraulic cylinder, the crane allows the movement of goods with a total weight of 1000 kg between three stops, located at levels 0mm, 2800 mm and 5500 mm. The platform is installed in a shaft with dimensions (L x W x H) of 1700 x 1560 x 8155 mm and moves at a speed of 0.2 m/s. It is controlled by a relay. Technical parameters of HIDRAL EH-1500 goods lift - level heights corresponding to the floor level: R0 – 0 mm, R1 – 2800 mm, R2 – 5500 mm - lifting capacity: 1000 kg - platform speed: 0,2 m/s - lifting height: 5,5 m - number of stops: 3 - platform shaft: steel structure clad with trapezoidal sheet metal - shaft dimensions (L x W x H): 1700 x 1560 x 8155 mm - type of control: relay -  ...

Used lifting column unloader of the trays with a mechanical device used to unload the container process granules distributed on trays. The device is equipped with a shredder granules. The device has a complete DTR manufacturer. Specifications: max. capacity: 160 kg Tray size: 35x600x1000 mm max. number of trays: 8 max. process container height: 1300 mm prod.1997 year max. External dimensions: height. 3080 mm, width. 1550 mm, 1820 mm length Material: AISI 316 / AISI 304 implementation class: EEx e II T 3

Load: 2.5 T

Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.

Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm

Load capacity: 2500 kg