holland lift used for sale

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

From a current recycling we offer you a New Holland T 7.315 AC. Year of Make: 2021 Registration date: 08.08.2022 Condition: used RDh: 2,328.8 Asking price: 130.000,00 € VB Original price: 235.000,00 € Equipment / accessories / other information (accuracy and completeness without guarantee): Viscotronic Fan & Motor Level 5 200 A alternator Main and auxiliary fuel tank without tank protection Auto Command transmission 50 km/h ECO Parking brake Sprung front axle with brake High-performance brake discs Thru axle 98" 650/60R34 Adjustable Wheels 710/75R42 Fixed Wheels Rear wheel weights 500 kg (2x 250 kg) Preparation of the guidance system Variable Steering Ratio Custom Steer Pressurized air procurement system ITBS Intelligent Trailer Braking System Battery main switch electrical Radar sensor Telemetry Modem 159 cc Standard Air Compressor External compresse ...

Hollanders - ColorEdge 230 Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system specially developed for the precise cutting precise cutting of textile materials. With a working width of 230 cm, This machine is ideal for roll-to-roll applications and guarantees clean, precise cuts, that meet the highest demands. Technical highlights: - Working width: Up to 230 cm. - Cutting technology: High-precision roll-to-roll cutting for even and accurate results. results. - Material compatibility: Suitable for a wide range of textiles (e.g. polyester). - Operation: Simple and efficient processing for maximum productivity. - Construction: Robust, durable design for continuous professional use. - Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts renewed - PVC transport rollers (11/2023)  ...

General SKU420U1321 LocationBarneveld MakeMondomix Pressure Working pressure8 Bar Main Features MaterialStainless steel Motor1.1 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x125 mm Inlet365x310 mm Outletdia. 19 mm Motor± 1,1 kW With frequency controllercheck With pumpcheck With Lobe pumpcheck Motorcheck MaterialStainless steel 1.4301 (304) General TypeA05 No.1283 Mounted on wheelscheck Floorspace1,60x0,55 m Total height1,60 m Weight200 kgFoam mixersPowdered foodsRubberFood additivesLubricants & oleoDairyConfectioneryMondomix HollandMixers > Foam mixersIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Food & Feed > Food additivesIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > DairyIndustries > Food & Feed > ConfectioneryBrand > Mondomix Hollan ...

General SKU317S552 LocationBarneveld CEcheck MakeHaas Mondomix B.V. (NL) TypeA-05 Pressure Working pressure10 Bar Main Features MaterialStainless steel Motor1.5 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x100mm Inletdia. 15mm Outletdia. 15mm With jacketcheck Motor1,5 kW 220-240/380-420 volt With frequency controllercheck Rotor speed700 rpm With Monopumpcheck Motor0.37 kW 230/400 Volt With frequency controllercheck Speed176 rpm MaterialStainless steel 1.4404 (316L) With jacketcheck General No.P13920 Year of construction2003 With switchcheck Floorspace1,1x0,3 M Total height0,8 M Weight150 KgFoam mixersPowdered foodsRubberFood additivesLubricants & oleoDairyConfectioneryMondomix HollandMixers > Foam mixersIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Food ...

available Tunnel Batch off from VMI Description attached!

- Clamping area 215 - 620 mm - Rotation area 170 - 620 mm - Stroke 290 mm - Max. wall thicknes 1 cycle 40 mm - Rotation speed 25, 38, 50 Min - TRB Roller conveyor 7000 mm with V Type - Construction in height adjustable

Engine: 4.4-liter Iveco 8045 4-cylinder turbo-diesel engine., Power: 95 pk (70.8 kW)., Power Take-Off (PTO): Delivers approximately 82 pk to the PTO., The rear three-point hitch has a maximum lifting capacity of approximately 4,450 kg., , Neat and tidy machine, in good working order. Tires (grass tires) are 95%, Available immediately! Maintenance performed; service invoices included, , = More information =, , General information, Year of manufacture: Oct 2003, Colour: Blue, , Technical information, Number of cylinders: 4, Type of fuel: Diesel, Drive: Wheel, Front axle: Tyre size: 380/70 R24; Steering; Tyre profile left: 95%; Tyre profile right: 95%, Rear axle: Tyre size: 16.9 R34; Tyre profile left: 95%; Tyre profile right: 95%, , Measures and weights, Empty weight: 3.895 kg, Carrying capacity: 2.105 kg, Wheelbase: 230 cm, , Functional, CE mark: yes, , Interior, Number of seats: 1, , Con ...

Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop

Lifter for mixing tubs with dosing unit, lifter type: HK1100/1950SL, number: 51.0.0113, year of construction: 09/2005, 400 V, 3 Ph, 50 Hz, 20 A, maximum capacity: 980 kg, lifting height: 2050 mm, total dimensions: 2000 mm x 1800 mm x 2800 mm, dosing unit on s/s frame, infeed dimensions: 1200 mm x 1100 mm x 750 mm, total dimensions: 1800 mm x 1800 mm x 2500 mm.

; Gross weight [kg]: 2580; Inspection Date: 2025-10-13; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 320

Aerial platform self-propelled scissor lift PB Type: S151-12E Year of Make: 2008 Load capacity 400 kg Platform dimensions approx. 2.8 x 1.19 m Platform extension approx. 100 cm Transport dimensions approx. 3.0 x 1.21 x 2.89 m (height railing folded down: 2.07m) Weight approx. 4180 Kg Working height approx. 15.1 m Platform height approx. 13.1 m Movable up to 15.1 m working height (indoor use) Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging can be organized by us. The shipping costs are a g ...

Stock# U2333-10 Used stainless steel vertical lifting device for rising and tilting pans. Working height of rising up to 320 cm. Total height of the tower 396 cm. Machine is equipped with stainless steel cart for mounting pans with distance between holders 1115 mm. Pan is tilted manually through gearbox. Machine is equipped with electrically driven hoist with working capacity up to 500 kg. Together with machine are included two stainless steel pans: First with volume 350 l - made by Kates (PL). Tank has internal dimensions: diameter 770 mm x length of straight side of wall 760 mm. Flat bottom, no discharge outlet. Top open, with stainless steel cover mounted on eigth clamps. Tank has two side wall shafts/supports for tilt discharge. Pan is mounted on mobile stainless steel platform. Second with volume 250 l - made by Kates (PL). Tank has internal dimensions: diameter 630 mm x len ...

Modernised machine with new LTG control system StoreControl L currently 6 identical machines available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer an LTG-TowerMax L 20.0-250-2460-825-6440 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6440 mm Overall width 2850 mm Installation depth 2900 mm Total payload machine up to 2 x 10,000 kg 52 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening at 900 mm above OKFF, then 800 mm high Engine power Vertical drive 4 kW / 400 Volt Horizontal drive 0.5 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer an LTG-TowerMax L 20.0-250-2070-825-6680 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6680 mm Overall width 2400 mm Installation depth 2885 mm Total payload machine up to 2 x 10,000 kg 37 carriers for up to 250 kg payload each in clear usable dimensions: B = 2070 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening in 900 mm above OKFF, then 825 mm high Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/grey, galvanised beam Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

We offer LTG-TowerMax L 30.0-250-2460-825-8450 storage systems modernized by us with a completely new StoreControl L control system. currently 13 of 17 identical aircraft are still available Exterior Dimensions: Height 8450 mm Overall width 2805 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 50 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 57 to 750 mm Start of the operating opening at 890 mm above OKFF, then 800 mm high; hand-operated lifting door, Engine power Vertical drive 5 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme creamy white/blue, galvanised backing Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently ...

We offer an LTG-TowerMax L 30.0-500-1300-1270-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6000 mm Overall width 1620 mm Overall depth 4150 mm Total payload machine up to 2 x 15,000 kg 20 carriers for up to 500 kg payload each in clear usable dimensions: W = 1300 mm T = 1270 mm (special depth) Usable height up to 50 to 750 mm Start of the operating opening in 300 mm above OKFF, then xxx mm high, with manually operated lifting door, Engine power Vertical drive xx kW / 400 Volt Horizontal drive xx kW / 400 Volt Colour scheme beige/beige, galvanised straps Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 30.0-400-2460-825-4889 storage systems modernized by us with a completely new StoreControl L control system. currently 6 identical machines are available Exterior Dimensions: Height 4889 mm Overall width 2785 mm Overall depth 2810 mm Total payload machine up to 2 x 15,000 kg 63 carriers with center bar for up to 400 kg payload each in clear usable dimensions: W = 2460 mm T = 825 mm Usable height up to 55 to 750 mm Start of the operating opening in 875 mm above OKFF, then 875 mm high Engine power Vertical drive 6 kW / 400 Volt Horizontal drive 0.55 kW / 400 Volt Colour scheme grey/blue, galvanised carrier Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

; Gross weight [kg]: 440; Rear tyres remaining: 100; Front tyres remaining: 100; Lift height[mm]: 350

Cap Liftinig and Arranging Machine to feed Capping Modules. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 50-100mm | power: 220V, 0.2kW | machine dimensions: L1250xW980xH2500mm | weight: 90kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

LIFTING AUGER, for regrinds, box housing mm.400 outer Ø, internal spiral 300 mm Ø, bearings with dust protection, Length 8,5 mt., Collection hopper 900 x 500 mm (or bespoke), exhausting outlet, intermediate supports every 3 mt., Bonfiglioli gearbox, 5,5 kw drive, complete with Users manual. CE compliance and el,.drawings, installed power - used power in work: about 60-65% : 5.5, availability: ca 4 weeks from confirmation, conditions: new machine, type: to collect and lift materials

Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible.

Work platform self-propelled articulated work platform with boom PB Type: S171-12ES Year of Make: 2013 Load capacity 400 kg Platform dimensions approx. 2.79 x 1.17 m Platform extension approx. 100 cm Transport dimensions approx. 3.28 x 1.22 x 3.28 m (height railing folded down: 2.32m) Weight approx. 5120 Kg Working height approx. 17.1 m Platform height approx. 15.1 m Movable up to 17.1 m working height (indoor use) Self-leveling support Shipping no problem. Location of the machine is 94244 Teisnach ( See pictures ACTUAL - condition) Prior viewing is expressly desired, simply leave phone number by mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information without guarantee. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packaging c ...

Offer 26103 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg

Offer 26110 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 230 V / 1.25 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg

Offer 26106 Technical data: - Operation via handheld remote control with cable - Load capacity 2000 kg - Platform size 2500 x 820 mm - min. Lift table height 205 mm - max. Lift table height 990 mm - Stroke 785 mm - Lifting speeds with / without load 25 / 15 mm/s - Countersinks with / without load 25 / 20 mm/s - Hydr. drive 400 V / 2.2 kW - Space requirement approx. W 2580 x D 840 x H min. 250 mm - Weight approx. 270 kg

Load capacity: 3000 kg

Type: SCM160 - set van 4 vijzels met elk een hefvermogen van 16 ton - Hefslag: 2000 mm -Snelheid omhoog/omlaag: 230 mm/min - 3 kW vermogen per aansluiting - totaal vermogen: 24 kW Elke krik is uitgerust met een absolute encoder voor het detecteren van de hoogte, rotatie en diagnose- en veiligheidssensoren om belasting, versleten moeren en obstakels onder het aambeeld te detecteren. Elektrisch systeem met standaard aansluiting en computergestuurde bedieningseenheid, gemonteerd op een verrijdbare trolley.

Baumann NUP-650 Paper Stack Lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Baumann NUP-650 Paper Stack Lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Baumann NUP-650 Paper Stack Lift Price: 3750 EUR Download PDF Baumann NUP-650 Paper Stack Lift This machine is in very good condition. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 650 kg. Pallet/sheet dimensions: 785 x 1150 mm. Documentation included. Ask About The Product Name (required) Company name Email (re ...

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table -Manufacturer: G.POWER-LIFT, Scissor lift table, flat form lift table type SEL 5-803 -Load capacity: 500 kg -Platform: 1400 x 1000 mm -Dimension when retracted: Height 110 mm -Extended dimension: Height 910 mm -Quantity: 1x lifting table available -Price: per piece -Transport dimensions: 1000/1400/H200 mm -Weight: 215 kg

Polar Mohr LW 1000-4 Paper Stack Lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr LW 1000-4 Paper Stack Lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr LW 1000-4 Paper Stack Lift Price: 4500 EUR Download PDF Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 mm Ask About The Pr ...

Perfecta BSH 5-1200 Paper Stack Lift with Sidewall - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Perfecta BSH 5-1200 Paper Stack Lift with Sidewall Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Perfecta BSH 5-1200 Paper Stack Lift with Sidewall Price: 6250 EUR Download PDF Perfecta BSH 5-1200 Paper Stack Lift with Sidewall This machine is in excellent technical and visual condition. It’s practically unused. It features an adjustable sidewall for easy stacking. Stylish design. 1200 kg lifting capacity Plate size: 990 x 1350 mm 380V power supply Weight: 80 ...

Lifting capacity 1000 kg Lifting height 2000 mm Fork length 1100 mm Fork width 510 mm Min. fork height 85 mm Load Centre 600 mm Weight: 475 kg Mast height 2350 mm driven Mast height 2350 mm retracted Charger

Side forklift JUMBO 5 t with fork adjustment, very good contition!; good

Double Decker - stackers, fork length 1150 mm, operating hours stand 13.01.2012 approximately 779, unladen weight 870 kg, capacity 2000 kg, height 2100 mm, charger; very well

Scissor lift off-road - work platform with crawler chassis and automatic support. HERED LIFT Type: HC0610E Payload: 230 kg Lifting capacity platform extension: 113 kg Platform dimensions: 0.7m x 1.65m Extendable platform + 0.90 m Transport dimensions 2.35 m x 1.24 m Track width: 1.07 m Height: 2.26 m Railing folded down Height: 1.93 m Weight approx.: 1900 Kg Working height: 7.8 m Platform height: 5.8 m Automatic levelling support Steel chains with non-marking plastic pads. Climbing ability up to: 40° Overload Shutdown: Battery-powered 24 V / 260 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty For further dates, delivery time and availability, please enquire. Depending on availability, the machine can be viewed and test driven at our warehouse. Subject to pri ...

scissor lift; Working platform lifting platform: Lifting platform HERED LIFT Type: HS1012H Load capacity: 320 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.22 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.50 m x 1.18 m Height: 2.49 m Railing folded down Height: 1.94 m Weight approx.: 2810 Kg Working height: 12 m Platform height: 10 m Climbing ability up to: 25° Battery-powered 24 V / 200 Ah Integrated charger 24 V/ 30 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires Other sizes with wheel and crawler drive available. For further dates or offers or availability, please inquire. Due to EU requirements, the offer is aimed exclusively at tradespeople. Depending on availability, the machine can be viewed and test driven at our warehouse. Sub ...

electric box lifting device, lift lift Brand: KLB Type: Lifter 1000 Built: 2013 Load capacity: 2000N, approx. 200kg maximum lifting height: 102 cm Crate dimensions: 62 x 62 cm Trolley with spindle drive Forks to hang in Cable for power supply Control panel with cable This item is only sold to traders. All information without guarantee

Syspal Tote bin lifter Stainless tote bin lifter, lifts to 1.5m, battery powered, 3Ph