holland lift used for sale

- Lifting rocker for handling long or large loads. - Load capacity 40 T. - Length 6310 mm. - Beam section 630 x 300 mm. - Equipped with central lifting point and suspension points at the ends. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-55

- With Klubb K26 work platform; - Working height: approx. 11.80 meters; - Platform height: approx. 9.80 meters; - Ready to drive; - Viewing recommended; - Condition see photos; Auction-ID: A1-49749-46

- With France Elevateur Topy 11 boom lift; - Working height: approx. 11 meters; - Operating hours: approx. 2,549 - Ready to drive; - Viewing recommended; - Condition see photos; Auction-ID: A1-49749-49

- Maximum load capacity: 125 kg. - Includes weightless manipulator with suspended control unit and ergonomic actuation control. - Includes 6,500 mm long aluminium rail section with travelling carriage. - The manipulator is moved on the rail by means of a motorised trolley. - In some of the photographs 2 similar manipulators may appear; only the manipulator shown in the foreground in the first photographs is included. - The common main longitudinal rail on which several manipulators travel is not included; Only the section of rail associated with this manipulator is included. - Operating conditions of this item without checking. Auction-ID: A7-48839-91

- Lifting rocker for handling long or large loads. - Load capacity 20 T. - Length 4230 mm. - Beam section 260 x 400 mm. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-56

Lift-tilt device, lifting tipper Make Itec, type 2700, built in 2017 for 200 and 300 litre standard loading trolleys Max. lifting capacity: 350 kg Dumping height: 2,231mm incl. 1 standard loading trolley 3x460V 50 Hz 0.75 kW - very good condition, hardly used - Was used to feed a piston filling machine - Documentation/operating instructions available Viewing possible in Korntal-Münchingen

Table length 1300 mm Table width 800 mm Lifting height 1020 mm Load capacity in kg 2000 kg Lifting height min. mm Connection voltage 400 V Total power requirement 0.75 kW Lifting speed - upwards empty sec. Lifting speed - downwards empty sec. Machine weight approx. 0.3 t Space requirement approx. 1.3 x 0.8 x 0.4 m Auction-ID: A7-49782-415

- Wall-mounted gantry elevator for handling loads. - Load capacity 700 kg. - Total width 3000 mm. - Post height 3900 mm. - Equipped with DONATI electric chain hoist, hoist capacity 500 kg. - Manual movement of the bridge on vertical guides by means of rolling carriages. - Includes control panel. - The steel cables visible in the photographs are NOT included. - ATTENTION! The delivery of this item will not be made until mid-January 2027. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-38

Extra options: All-round LED lighting, daytime running lights, joystick control, blue spot, beacon, Red hazard lighting Auction-ID: A1-40397-7

Capacity 1000kg, max height 124cm, year of construction 2018 Auction-ID: A1-48474-184

Equipped with driven roller conveyor, dimension roller conveyor lxw 450x160cm Auction-ID: A1-48474-10

Equipped with driven roller conveyor, dimension roller conveyor lxw 550x160cm Auction-ID: A1-48474-11

TruLaser 5040 + LiftMaster Compact + Cooler + Extraction System + Gas Control Block Machine suitable for cutting 4000 x 2000 mm sheet The LiftMaster controls the unmanned loading and unloading of the Laser Cutting hours: 38195 Laser on: 56977 Laser can be seen working available end of September Auction-ID: A1-47358-15

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https://youtu.be/l0uTt_vas10 - Former Linde full-service device - Battery: 14/2020, 24 3PZS 375Ah, voltage measured at rest with 25.2V Auction-ID: A1-49673-343

Original price: 4.950€ Logistics: Facilitates lifting in storage and distribution centers. Industrial: Supports in production environments with recurring lifting movements. Nursing and healthcare: Helps caregivers with physically demanding activities. Ottobock Back was developed together with logistics experts and employees of warehouses and parcel distribution centres. The exoskeleton works according to a biomechanical principle: the load is removed from the shoulder like a backpack and redirected to the thighs with the help of the support structure of the exoskeleton. The energy storage absorbs force when bending and releases it again when lifting. This leads to a noticeable relief of the lower back of up to 25 kilograms. The heart of the system is the purely mechanical control at waist height – a technological world first. This can distinguish between bending and walking and ...

- Maximum load capacity: 125 kg. - Includes weightless manipulator with suspended control unit and ergonomic actuation control. - Includes 6,500 mm long aluminium rail section with travelling carriage. - The manipulator is moved on the rail by means of a motorised trolley. - In some of the photographs 2 similar manipulators may appear; only the manipulator shown in the foreground in the first photographs is included. - The common main longitudinal rail on which several manipulators travel is not included; Only the section of rail associated with this manipulator is included. - Operating conditions of this item without checking. Auction-ID: A7-48839-90

MACHINE DATA: -Standard version (according to technical data sheets) -Articulated Loader -Operating weight 2850 kg -Long Boom -FOPS-ROPS canopy, a cab version is also available. -Mechanical suspended seat - vinyl -2 large rear-view mirrors -Standard fenders -Speed 0-20 kph -Wide range of attachments ENGINE: -Engine emissions according to Stage V or Tier 4 Final - EU Directive 97/68 -Water-cooled Perkins engine TCD 1.7 L3, 36 kW (49 hp) at 2800 rpm. DOC+DPF -BOOM & QUICK-COUPLER -Loader boom with P-bucket orientation kinematics with 100% precise parallel lifting -Boom float function -4 points hydraulic quick-coupler TRANSMISSION: -Hydraulic system -Hydrostatic transmission with wheel motor -Hydrostatic inching brake, acting on all 4 wheels -Hand throttle (M-Drive) -Speed limit (Speed-control) -4-wheel drive -Tyres BKT AS504 - 11,5/80  ...

Extra options: Front lighting - Front blue spot - Rear blue spot - Fingertip steering - Charger included Auction-ID: A3-46152-16462

Manufacturer: Enerpac Model: ZE5040NW-R hydraulic power unit + hydraulic cylinders (set) Type: Electric hydraulic lifting system Manufacturer: Enerpac Series: CLL Series Model: CLL3006 Type: Single-acting lock-nut hydraulic cylinder Quantity: 4 pcs Capacity per cylinder: approx. 300 US tons / 2,668 kN Combined nominal capacity: approx. 1,200 US tons / 10,672 kN Stroke: approx. 150 mm / 5.91 in Max. working pressure: 700 bar / 10,000 psi Load holding: Mechanical lock-nut for secure load holding Application: Heavy-duty lifting and load-support operations Power unit Model: ZE5040NW-R Max. operating pressure: 700 bar (10,000 psi) Electric motor: 2.2 kW (3 HP) Speed: 1740 rpm Power supply: 208–240 V, 3-phase, 60 Hz Included equipment 4 × Enerpac hydraulic cylinders 2 × Enerpac electric hydraulic power units Hydraulic hoses with quick couplings Hydraul ...

Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3

Machine number: 2460-825 Operating voltage: 400 V Frequency: 50 Hz Connection: 7.5 Rated current: 20 A max. container loading: 400 kg max. permissible average container load front: 400 kg for max. 43 containers and rear: 400 kg for max. 44 containers, max. total load: 40,000 x 20,000 kg Dimensions per panelau: 2450 x 880 mm without contents Attention: without partition walls, as three paternosters were installed together. Auction-ID: A7-49089-48

Machine number: 2460-825 Operating voltage: 400 V Frequency: 50 Hz Connection: 7.5 Rated current: 20 A max. container loading: 400 kg max. permissible average container load front: 400 kg for max. 43 containers and rear: 400 kg for max. 44 containers, max. total load: 40,000 x 20,000 kg Dimensions per panelau: 2450 x 880 mm without contents Attention: without partition walls, as three paternosters were installed together. Auction-ID: A7-49089-2

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/aElEpScpIpE - Former Linde full-service device - Service valid until 12/2026 - UVV valid until 12/2026 - Battery: Premium Hoppecke 05/2024 48V 775 Ah , voltage measured at rest with 50.4 V - Duplex mast with full free lift - 3rd + 4th valve, fork adjuster + sideshift - Front work light - Rear work light Auction-ID: A1-49673-136

- Maximum working height approx. 7950 mm. - Maximum platform height approx. 5950 mm. - Load capacity 200 kg. - Number of people allowed: 2 + 40 kg. - Slope admissible 25%. - Platform dimensions 650 × 900 mm. - Powered by 24 V batteries. - Rated power 5 KW. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-3

Note that the last/back photos show the item in the assembled state. Auction-ID: A1-49575-68

This Cerdi GLT 403 is a professional, mobile inverter welding power source for intensive industrial use. The machine is suitable for MMA (stick welding) and Lift TIG welding and delivers a maximum welding current of 400 A. Thanks to the switchable mains voltage (230 V / 400 V), the machine can be used flexibly at different work locations. The welding machine is in unused condition and is still in its original transport packaging. The case shows hardly any signs of wear. The machine is equipped with a digital current and voltage readout, Hot Start, Arc Force and Lift TIG function for optimal welding properties. The mobile chassis with large transport wheels and handles makes the device easy to move. Comes with remote control, connection cable, ground cable with ground clamp, documentation and other accessories shown. Auction-ID: A3-46152-14868

Machine number: 1300-825 Operating voltage: 400 V Frequency: 50 Hz Connection: 7.5 Rated current: 16 A Max. container loading: 500 kg Max. permissible average container load front: 500 kg for max. 37 containers and rear: 500 kg for max. 38 containers, max. total load: 40,000 (2 x 20,000 kg) Dimensions per panelau: 1300 x 900 mm without contents Attention: without partitions, as three paternosters were installed together. Auction-ID: A7-49089-87

Robust agricultural machine for intensive soil and seedbed preparation. Thanks to the 3 meter working width, a considerable area can be worked efficiently. The power harrow crumbles and levels the soil, while the heavy packer roller then provides compression and further leveling. This version is also equipped with hydraulic roller adjustment, hydraulic roller lock and a heavy hydraulic lifting structure, which makes the machine considerably more interesting than a simple basic version. Equipped with, among other things: heavy Maschio power harrow construction; approx. 3 m working width; PTO PTO drive; cardan shaft included; heavy packer roll; hydraulic adjustment of the roller; hydraulic roller lock; hydraulic lift/lift; hydraulic cylinders, pipes and couplings; adjustable track wipers/subsoilers; heavy three-point construction; side plates; Wide rear roll over the full working width. Th ...

Compact and manoeuvrable VMAX E10N electric forklift truck with a nominal lifting capacity of 1,000 kg and a maximum lifting height of approximately 3 metres. Thanks to its compact dimensions and electric drive, this truck is particularly suitable for warehouses, workshops, production areas and logistics applications where manoeuvrability is essential. The machine is equipped with a duplex mast, solid tires, safety roof and a 24V traction battery. The mast, chains and guides are in good condition. The truck has a robust counterweight and offers stable and safe operation in daily internal transport tasks. The machine has approximately 11,953 operating hours. The forklift presents itself visually well-groomed with normal signs of wear according to age and professional use. Starts, drives, steers, lifts and lowers properly during test run. The charger is included. If necessary, it can be lo ...

- 4 wheel drive - Limited slip differential - Ground clearance of 28cm - Extendable platform with 1200mm Auction-ID: A3-46152-16450

- Maximum working height approx. 5800 mm. - Maximum platform height approx. 3800 mm. - Load capacity 180 kg. - Number of people allowed: 1 + 100 kg. - Slope admissible 20%. - Platform dimensions 650 × 800 mm. - Powered by 24 V batteries. - Rated power 3.80 KW. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-30

- Maximum working height approx. 5800 mm. - Maximum platform height approx. 3800 mm. - Load capacity 180 kg. - Number of people allowed: 1 + 100 kg. - Slope admissible 20%. - Platform dimensions 650 × 800 mm. - Powered by 24 V batteries. - Rated power 3.80 KW. - Operating conditions of this item: unchecked. Auction-ID: A7-48839-10

Maximum lifting height approximately: 4200 mm, Equipped with 4x suction cup, Ø 400 mm, double Vacuum system circuit with 2 independent vacuum pumps, rotatable yoke, outriggers, electric front-wheel drive, 2× 12V 105A battery, 230 V battery charger. Auction-ID: A1-48474-30

Renault Premium 410 DXi 4x2 curtainsider truck – swap body – Dhollandia 2.000 kg – 2009 Specifications: Brand: Renault Trucks Model: Premium 410 DXi Type: 24APD4 Date of registration: 24-04-2009 VIN: VF624APD000002061 Mileage: approx. 1,175,514 km, read Engine: DXi 11, 6-cylinder diesel Displacement: approx. 10,837 cc Power: 302 kW / approx. 410 hp Emission class: Euro 5 Drive: 4x2 Transmission: manual Permissible total weight: 19,000 kg Tare weight: approx. 8.200 kg Gross Combination Weight: 44,000 kg Maximum front axle load: 7,100 kg Maximum rear axle load: 13,000 kg Superstructure: curtainsider curtainsider change construction Dimensions of the body: approx. 7.00 x 2.55 x 2.80 m (L x W x H) Mounting surface-mounted: manually operated twistlocks Tail lift: Dhollandia DH-SV10 slider tail lift Tail lift construction date: 01/2009 Lift capacity: 2,000 kg a ...

maximum lifting capacity - 320 kg, Year of manufacture - unknown Auction-ID: A7-49844-2

Battery pack capacity: 2(46V/230AH); Swivel: 360° continuously; Wide work basket (1.2 m), 2x 80° rotatable; Platform capacity 230 kg (2 persons + 70 kg); Own weight: 2700 kg (can be put on the trailer); Fully electric (CO2 neutral working); AGM battery pack (maintenance-free); Proportionally operable; Driving at altitude: Yes; equipped with non-marking tracks and on-board loader; Auction-ID: A1-47415-29

Tare mass: 900 kg Payload: 14,000 kg Max. gross weight: 14,900 kg Sling angle: 45° Approximate dimensions : roughly 330 cm long, 210 cm wide, 150 cm high — consistent with a large offshore-rated container/lifting frame. Auction-ID: A1-49705-114

Renault Midlum 180 box truck – 11,990 kg – tail lift 1,500 kg – 2006 Specifications: Brand: Renault Model: Midlum Type/Variant: 42AEA15CC50 VIN: VF642AEA000021557 registration date: 08-09-2006 Fuel: diesel Displacement: 4,116 cc Power: 128 kW / approx. 174 hp Transmission: manual Maximum permissible mass: 11,990 kg Registered mass: 6.015 kg Theoretical difference to maximum permissible mass: approx. 5,975 kg Seats: 3 Tyre Size: 245/70 R17.5 Dimensions of container (W x H x L): 245 x 230 x 755 cm Lift capacity: 1,500 kg Features: Closed body Wooden cargo floor Lashing/loading rails along both side walls Interior lighting in cargo space FIMOPART hydraulic tail lift Power windows Double passenger bench Particularities: Vehicle and body are in used condition, with visible signs of wear, damage and local corrosion. Driver's seat is damaged. The ac ...

Technical details Type: Truck-mounted aerial work platform Mileage: 54,000 km Operating hours: 3,150 h Max working height: 20 m Max lateral reach: Approx. 10.5 m Max lifting capacity: 240 kg Basket dimensions: 1,400 × 700 mm Basket rotation: 2 × 90° Drive-through height: Approx. 2,700 mm Drive-through length: Approx. 7,550 mm Drive-through width: 2,100 mm Gross vehicle weight (GVW): 3,500 kg Equipment: - Webasto auxiliary heating - Heated seats - Electric mirrors - Lift start/stop control from basket Certification: UDT valid until 2027 Usage: In continuous operation Auction-ID: A7-49844-1

Roller conveyor with driven rollers Specifications: Lifting height: approx. 2.50 m Includes 2x roller conveyor, Dimension roller conveyor: 2660 x 3300 mm Roll size: 2500 x 130 mm Auction-ID: A1-47361-46

Iveco Eurocargo 75E180 4x2 box truck – Zepro 1.000 kg tail lift – 2008 Specifications: First registration: 17-09-2008 Mileage: approx. 484.016 km Engine: 3,920 cc, 4-cylinder diesel engine Power: approx. 130 kW / 177 hp according to vehicle documentation Transmission: 6-speed manual Emission class: Euro 5 Drive: rear-wheel drive, 4x2 GVW: 7,490 kg Tare weight: approx. 5.060 kg Payload: approx. 2,355 kg Overall dimensions: approx. 8.00 x 2.54 x 3.55 m Dimensions of cargo space: approx. 6.10 x 2.47 x 2.40 m (L x W x H) Loading volume: approx. 36 m³ Tail lift: Zepro hydraulic tailgate, approx. 1,000 kg lifting capacity Suspension: leaf spring suspension front and rear Brakes: drum brakes Tyre Size: 215/75 R17.5 Front tire tread: approx. 40% Rear tire tread: approx. 30% Rear axle: twin wheels Cabin: day cabin Features: Box body Wooden cargo floor Loading ...

Specifications: Motor power: 405 kW Number of cylinders: 6 Displacement: 16,120 cc Features: Rear camera Rear lift/steering axle Super handlebar Refrigerator Speed Cameras Rotating beacons all around Hydraulically adjustable rear bumper Volvo navigation system Radio Air conditioning Climate control Parking heater Sleeping bed Storage cabinets Floor mat Auction-ID: A1-47415-28

equipped with non-marking tracks; PAY ATTENTION malfunction in lowering (only lowers with emergency lowering lever), aerial platform drives slightly crooked in leapfrog, crooked in tortoise position and steers poorly while driving (see also the lot video) Auction-ID: A1-47415-30

Capacity: 600 kg Reference: Alesco - Lot 10 Auction-ID: A7-49882-8

Technical details Manufacturer: MAN Model: TGS 26.440 Type: Hook lift truck with truck-mounted crane Year: 2013 First registration: 11.01.2013 VIN: WMA18SZZXDW180216 Engine: - Diesel - Displacement: 10518 cm³ - Emission standard: Euro 5 Transmission: Automatic Mileage: 199435 km Number of axles: 3 Number of seats: 2 Payload: 14155 kg Curb weight: 13945 kg Configuration: - HYVALIFT hook lift system - HMF 1300-K2 truck-mounted crane (2012) - Power take-off (PTO) - 2 hydraulic outriggers - Air suspension - Lift axle (3rd axle) - Ringfeder towing hitch - Disc brakes Equipment: - Electric windows and mirrors - Heated mirrors - Central locking - Climate control - Heated seats - Cruise control - Engine brake - Differential lock - Hill assist - Rear and right-side camera - Radio CD - Parrot hands-free kit - Digital tachograph - Roof hatch - AdBlue syste ...

Tracked Boom Lift with Non-Marking Tracks – 300 kg Platform Capacity Specifications: Platform capacity: 300 kg Maximum permissible tilt while driving: 5° Undercarriage: Tracked undercarriage Caterpillars: Non-marking Control: Proportional Equipped with: Non-marking tracks Driving function over the entire working range Proportional steering for precise manoeuvring Optimized hydraulic system Multifunction control in the platform Interactive display in the downstairs operation Digital readout of operating hours Digital fuel level readout Digital readout of sensors and service codes Inclination alarm at 5° Indicator lamp and warning horn Four work lights, two of which are on the rear of the counterweight and two on the front of the superstructure Two tool compartments in the platform Four leash eyes for safety attachment in the platform Four lashing eyes on the cha ...

Ford Transit 2.2 Diesel 114,000km original kilometres, demonstrable with carpass 1st owner Ex government vehicle Adapted for wheelchair transport Plywood floor plate + 4 Quick-Lock rails Swivel booster seat – type Ricon Orange flashing light Wheelchair attachment kit AMF + hip belt Wheelchair lift up to 350kg Manual gearbox Radio / AUX / CD Player Air conditioning + heating in ceiling On-board computer Sliding door Central locking Auction-ID: A3-46150-5035

consisting of two pieces of load capacity of 1000 kg each Reference: Alesco - Lot 111 Auction-ID: A7-49882-68

With CE papers; with 1 year safety inspection Auction-ID: A1-47388-1004

Equipped with: 4x4 drive, Deutz D2011 L03 diesel engine (3 cylinders) Auction-ID: A1-47388-97