holl used for sale

Specifications (manufacturer): -Manufacturer: Multimatic iLSA Germany GmbH & co. KG -with armrest bracket -with JUN-AIR compressor -TURN DW 300 electronic

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Production line for the mannufacture of sacks for cement and building material, consisting of one universal tuber 981, Gartemann + Hollmann, and two valve sack bottomers 525, Gartemann + Hollmann

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

Mondomix - Holland B.V. aerator with cream function, type: B-25, project: P12395-02, 380 V, 3 Ph, 50 Hz, dimensions: 2100 mm x 700 mm x 1730 mm. Including pump with tank, dimensions: 1600 mm x 1650 mm x 1500 mm.

Max. Speed: 40-50/min, product size range: 40mm/40mm/16mm to 300mm/225mm/96mm, max. output: 60ppm, film width: min/max: 50mm/435mm, max. film roll diameter: 400mm.

Stroke: 1700mm, length: 1870mm, width: 1050mm, height: 3200mm, with documentation, an inspection is possible.

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

TÜV: 7/2025 Tires: 540/65 R30 and 650/65 R42 Engine stage Tier 4b – 260 hp

Single head fighter, welding machine, single head welding machine, fighter welding machine, butt welding machine -Tension: pneumatic -Weight: 270 kg

General SKU420U1321 LocationBarneveld MakeMondomix TypeA05 No.1283 Pressure Working pressure8 Bar Main Features MaterialStainless steel Motor1.1 KW Rotor80 mm Specified Features - Foam mixer MaterialStainless steel 1.4301 (304) Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x125 mm Inlet365x310 mm Outletdia. 19 mm Motor± 1,1 kW With frequency controllercheck With pumpcheck With Lobe pumpcheck Motorcheck Information Mounted on wheelscheck Floorspace1,60x0,55 m Total height1,60 m Weight200 kgFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU305U617 LocationBarneveld MakeDVA Holland-Merten TypeMerto-Fil 1,1 m² Mach.No.1032 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor11 KW Surface1.1 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface1,1 m² Capacitybruto 1150 ltr. (netto 800 ltr.) Vessel sizesDia. 1200x900 mm Plate sizesDia. 1200 mm Top connectionsDN50 Solids outletDN250 Liquid outletDN50 With jacketcheck (42 Ltr.) Max. temperature-10/160 ºC With stirrercheck Motor11 kW, 400/690 Volt, 1400 rpm Stirrer speed3-18 rpm Cake thickness320 mm Cake capacity340 Ltr. Stirrer can be liftedcheck With hydraulic unitcheck MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Mounted on legscheck With switchgearcheck (as is) CEcheck Mounted on wheelscheck Floo ...

General SKU317S552 LocationBarneveld MakeHaas Mondomix B.V. (NL) TypeA-05 No.P13920 Year of construction2003 Pressure Working pressure10 Bar Main Features MaterialStainless steel Motor1.5 KW Rotor80 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 80x100mm Inletdia. 15mm Outletdia. 15mm With jacketcheck Motor1,5 kW 220-240/380-420 volt With frequency controllercheck Rotor speed700 rpm With Monopumpcheck Motor0.37 kW 230/400 Volt With frequency controllercheck Speed176 rpm MaterialStainless steel 1.4404 (316L) Information With switchcheck Weight150 Kg CEcheck Floorspace1,1x0,3 M Total height0,8 MFoam mixersMondomix HollandMixers > Foam mixersBrand > Mondomix Holland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination  ...

Description: Serial number: HACT6155VKEG03584 ENGINE 6 cylinders 123 HP 6728cc Fuel tank capacity: 230 liters ADblue tank capacity: 39.5 liters Maximum speed 40 km/h Hydraulic clutch Electro-hydraulic inverter Hours according to the counter: 6360 Ownership change costs will be paid by the buyer IMPORTANT: Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities) Approx. Onsite Dimension. (l x w x h): 4,510 x 2,340 x 2,150 mm, weight approx.: 6,500 kg

SAFAN Lochem Holland rb.1996 type CNCL 80-2550 hydraulic press brake. CNC-controlled synchronous machine DNCS ARA-controlled axes-Y1; Y2; X; Crow - Wila Moducrown table deflection compensation controlled from CNC. In addition, a hydraulic die for felting-flattening sheet metal type DT005, controlled from CNC. Pressure 80 t x working length 2550 mm. Between the sides 2050 mm. Weight of the machine 6 t. Drives 11 kW. A set of tools of Amada/Trumpf system for the entire length of the machine, die V=12 mm /angle 28 degrees and punch 28 degrees/h=105 mm. This makes it possible to bend and flatten a sill 6 mm wide. Full DTR documentation. Health and safety manual in Polish. The machine meets the requirements of the EU Machinery Directive(CE).

Press brake with servo-electric drive Safan Holland type SMK-40-2050 -TS1, rb. 1995. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2050 mm; Uniquely large stroke: 275 mm; Between columns: 2150 mm; Pressure: 40 t CNC control TS1 -simulation of 2 D, Polish - controlled axes Y1; Y2; Y3 - (CNC controlled lower table ); X -10 point table deflection arrow compensation. Drive; 9 kW; dimensions: 3000x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a stand instruction BiHP in Polish. For the machine we offer a comprehensive service.

Friesuse Kiremko BV from French fries Production, Completely built of stainless steel, Fully automatic deep fryer oven, With integrated heat exchanger, Is heated with Thermooel Indirectly, L: 8500 mm. -Kiremko Kiremko BV Fryer, Completely built in stainless steel, Fully automatic fryer continuous furnace, with an integrated heat exchanger, Is with Thermo-oil indirectly heated, L: 8500 mm

2900 h, Austrian registration, 40km/h gearbox, max. power at 2200 rpm 88kW, max. Load capacity 3300kg, max. lifting height 9.6m, hyd. Quick coupler, 3rd control circuit, 4x4x4 four-wheel drive & four-wheel steering,, with pallet fork & shovel

Description: Unused Laying on: 12 pallets In various sizes including  ,250x250x200 mm, 250x250x250 mm, 150x150x150 mm Approx. Onsite Dimension. (l x w x h): 8,000 x 2,400 x 2,000 mm, weight approx.: 500 kg

Stepped end tuber type 951, Gartemann + Hollmann, Year 1980, 4 plies, 2 colours, photo cell, Tube width 30-65 cm, Tube length 50-121 cm, Machine mechanically and electrically mounted, we also have a 4 colour tail end printer suitable for that machine

Description: Lens inserts ,WF 10 X Approx. Onsite Dimension. (l x w x h): 300 x 250 x 350 mm, weight approx.: 5 kg

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hollow shaft motor, three-phase electric motor, three-phase motor EX SIEBERT EMP112-B8 Hollow shaft diameter ( inner ): Ø 28 / 32 mm hollow shaft diameter ( outer ): Ø 40 mm Flange diameter: 160 mm used, tested ! very good condition ! Dimensions: 305 x 220 x 280 mm

Hollow nozzle, nozzle FEUERLÖSCHGERÄTEWERK LUCKENWALDE ( FGL ) Type C with ball valve used, tested ! Dimensions: 570 x 130 x 160 mm

Hollow section fastener, hollow section fastening, for steel construction, 10 pieces BOXBOLT® BQ1Z12 Clamping range: 5 - 25 mm drilling diameter: Ø 20 mm screw: M12 x 1,75 Screw length: 55 mm Width across flats: 17 / 26 mm Material: Steel, galvanized New Dimensions ( single fastener ): 65 x 30 x 26 mm

Hollow chamber gasket profile, window profile, push-in SAINT-GOBIAN SIPRO® profile: P1476-724 Length: approx. 55 m Profile width: 26 mm Profile height: 27 mm Material: high-viscosity silicone rubber New ! Dimensions ( packaging ): 600 x 600 x 250 mm

Plummer Block Housings, Plummer Block Housings -Hole center height: 40/Ø 10 mm -Base plate: 145 235 x 95 mm -Price: per piece -Number: 2 pieces -Dimensions: 145/95/H approx. 65 mm -Weight: 1.3 kg

Plummer Block Housings, Plummer Block Housings -Hole center height: 70/Ø 16 mm -Base plate: 235 x 147 mm -Dimensions: 235/147/H approx. 100 mm -Weight: 4.3 kg

Gebr. Drilling and mortising machine Hollow Mortizing Machine FIELDS MCD Motor power: 1.1 kW (380V) max. chisel insert: 25 mm Table length adjustment: 240 mm Table depth adjustment: 76 mm Vertical stroke: 175 max. wood height: 1,000 mm Drill Center Distance: 82 max. wood width: 160 mm Weight: 185 kg Information according to manufacturer incl. 2 chiseling tools Copy of instruction manual available Good original condition! From private workshop closure Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

Description: Hollow sections: 100x50x4 mm: 49 pcs 50x50x3 mm: 13pcs Material: 1.4301 Approx. Onsite Dimension. (l x w x h): 6,000 x 1,000 x 600 mm, weight approx.: 2,835 kg

Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork company Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg

turning diameter over bed:650 mm turning diameter over slide:450 mm turning length:1435 mm bed width:350 mm spindle bore:155 mm spindle speed:50-800 (3 stufig, stufenlos) U/min spindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mm tailstock quill diameter:95 mm tailstock quill taper MT:5 MK tool post size:25x25 mm power requirement:7,5 kW weight of the machine ca.:2400 kg dimensions:3020x1140x1770 mm DRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 Stück Factory new center lathe with 2-axis digital display and variable speed and many more. CHARACTERISTICS: Powerful, flexible and productive With ...

Sell a machine from Soft Electronic Systems Holland. It seals 10 and 5Kg buckets with fumigation and has a power of 10 Bucket the Min. Model PMS 3-6.

4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Design of PRO 1000 concrete products machines put this machine beside most flexible in the world. The most versatile machines in their class, the PRO machine series offers the largest variety of handling and cubing systems available. By upgrade of handling the equipment on the wet and dry line side, the capacity of complete installation can be increased significantly. Double layer products are easily produced with and optional face mix device. Pallet size: 1400 x950 mm Useful area: 1350 x850 mm Paving stones 10x20x6 cm Production capacity in 8h 1355m2 Hollow block 20x20x40 cm Production capacity in 8h 17280 pieces

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

3 x Used Gas Generator Set JENBACHER Type: J 320 GS B02 / B05. With Control Panel and all standard accessories. two engines have been overhauled. 1x Motor KW / RPM: 852 / 1500 2x Motor KW / RPM: 1034 / 1500 --- Volts: 400/231 --- Hz: 50 --- Brandstof: Natural Gas --- Generator Type: Stamford --- Bouwjaar: 1996 / 1997 --- Draaiuren stand: 52.000 ---- We are located in the Netherlands (Province South Holland). In our stock we have more gas and diesel generators. For more information please feel free to contact us. You can call our language lines and speak to someone in one of the languages we support. Tel: +31 (0)6-22497850 George Modderkolk / Manager ( Dutch, English ) +31 (0)6-38639071 Leon Hensen / Sales ( Dutch, English ) Modderkolk Horti Services Gas Power Holland

Euroblock 12 movable block machine offers a very wide production range of concrete products. It can be used as a universal machine as well as special product making machine. This multi-purpose block machine can be used for the production of: Hollow blocks Chimney blocks Hourdy blocks Insulated blocks Garden blocks Solid blocks Curbstones Paving stones with or without face mix Layers separated by plastic foil or by sand. With its standard safety devices, rigid frame construction that allow heavy duty use, and simplicity of design that reduce maintenance to a minimum, this machine is the most economical choice for a very wide range of concrete products manufacturers. Useful area: 1290 x1130 mm (product height 170 ? 250 mm) Useful area: 1290 x900 mm (product height 250 ? 500 mm)

Tip height over bed top distance of 200 mm 1000-1500 mm Permissible diameter on bed 400 mm Permissible diameter on sled 230 mm bed Bed width 280 mm head Spindle passage 52 mm 6ʺ camlock spindle nose Speed Spindle speed 16 n. Values 36-2000 RPM. Feeding and tapping 72 longitudinal feed 0.05-4.45 mm / rev 72 cross feed 0.025-2.25 mm / rev 54 Whitwort Division 1-56 TPI 54 metric pitch 0.5-28 mm 54 English Division 1-32-1ʺ inch 54 Division of modular 0.25-14 mm 54 pitch Division 2-112 D.P.. Cross slide 470 mm Width 180 mm Maximum stroke 235 mm Cross slide Length 260 mm Width 120 mm Maximum stroke 150 mm Slewing range 360 degrees Counter tailstock Hollow shaft diameter 58 mm Hollow shaft length 265 mm Maximum stroke hollow shaft 120 mm Cone of the hollow shaft 4 C.M.. - MK Motor Power 4 kW

Internal grinding system for toepfe/hollow goods up to a? 400 mm x 600 mm Hydraulically movable grinding buttons, reciprocal working Complete with vacuum base holder and vacuum pump incl. hydraulic unit and control cabinet ; completely overhauled

LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the outer edge (if needed) Station #7...(1) parting tool ...mills the finished part off the blank finish part drops.head stock advances to scheduled stop ...cycle continues 400+ parts per hour are possible complete with lots of tooling and various size steady rests

internal grinding machine for pots / holloware up to áÆ\'Ã

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

Application: Picture frames, window construction, prefabricated houses, glass strips, hollow-throat strips, interior fittings, skirting boards, door construction, decorative strips, decorative profiles, etc. For Brads (compression head pins) of type "J" from 16 - 50 mm Technical data: - release protection - side loader magazine - setback-free - silencer - weight: 1.25 kg - working pressure: approx. 4-7 bar - air consumption: approx. 0.7 l / nailing Delivery in a plastic case

pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

With PRO 500 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with PRO series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm