hole used for sale

length: 1980 mm width: 670 mm height over floor: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scheer DB 5 dowel hole drilling machine for the precise and rapid drilling of dowel holes (horizontal and vertical) in solid timber and board materials. The machine is ideal for mass production in furniture manufacturing as well as for precise joints in interior fit-out work. Includes a comprehensive range of dowel bits. Technical data: Drilling spindles: 21 Pitch: 32 mm Passage width: max. 1,000 mm Swivel mechanism: pneumatic Fax: 07427 920050, Mobile: 016096624745, Machine No. 208695, Jan 2011, Cost price €1,000 D-89440 Lutzingen, Tel. 09074 1371, Fax: 09074 5516, April 2015, purchase price €500 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: Cylinders: 6 Hold-down units: 3 Pressing area: 260 x 145 cm Condition: Gebraucht Location: Tauberbischofsheim, Germany

pressure: 50 t throat: 610 mm total power requirement: 7,5 kW machine weight ab.: 1700 kg dimensions: 1500 x 650 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 175 mm work height max.: 1055 mm stroke: 30 mm sheet thickness - max.: 8 mm total power requirement: 4 kW weight of the machine ca.: 1020 kg dimensions: 910 x 670 x 1930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing force: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 620 mm stroke: 0-100 mm hole diameter in sheet thickness: 40 in 20 mm no. of strokes: 49 Hub/min Control: total power requirement: 15 kW weight of the machine ca.: 3.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...

pressure: 35.0 t plate thickness: max. 8.0 mm throat: 830 mm diameter of seal: max. 105 mm table:: 1500 x 1200 mm work height max.: 920 mm die stroke: ca. 90.0 mm strokes per minute: ca. 200 Pressure power: 220 bar oil volume: 80.0 l total power requirement: 4.0 kW weight of the machine ca.: 3200 kg range L-W-H: 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction Solid cast or welded frame (C-shape) Extremely high punching precision Compact design = small footprint Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely a ...

core boring: 70-560 mm bore depth: 20000 mm drilling diameter: 70-500 mm core boring capacity in St 60 - reboring: special: 560-1000 mm workpiece diameter: 3200 mm workpiece weight: 200 t faceplate diameter: 2900 mm speed of boring spindle:: 100 - 500 U/min feed range: 3 - 2000 mm/min boring spindle drive: 55 kW spindle head drive: 150 kW workpiece turning speeds: 230 U/min control: Fanuc total power requirement: - kW weight of the machine ca.: - t 2010 Retrofitted equipped with: - Fanuc Control - 4-Jaw Chuck - Oil Pressure Head - Boring Head - Drill Head - 2-Point Rollers Steady Rest (4) - 3 Point Steady Rest (2) - Bar Rest (2) - Coolant & Coolant Piping - Chip Conveyor - Honing Oil Tank & Honing Tool Bars The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 56 - 650 mm bore depth: 24000 mm swing diameter: 5800 mm max. workpiece diameter: 3400 mm workpiece length - max.: 24000 mm workpiece weight max.: 380 t speeds: 160 U/min faceplate diameter: 2500 mm control: FANUC 31i-B bore head horizontal movement: max. 25870 mm cutting speed: 0,1 - 1000 mm/min rapid feed: 4000 mm/min main drive: 500 kW bed length x bed width: 53850 x 2500 mm total power requirement: 300 kVA weight of the machine ca.: 700 t dimensions of the machine ca.: 95 x 72 m Deep Hole Drill & Honing Machine (installed 2017) - CNC Control Fanuc 31i-B - BTA Boring - Boring Head (A-Axis) - Pressure table (Z-Axis) - Chip Conveyor - 2 steadies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UTITA AF 15X2 ist eine Tieflochbohrmaschine hoher Präzision, konstruiert für hohe Genauigkeit und Zuverlässigkeit. Arbeitsmöglichkeiten: 2 Bohrspindeln, Bohr-Ø ab 15 mm, Spitzenhöhe 200 mm; Tisch 700×380 mm; Längsweg (X) 400 mm. Technische Hauptdaten: 9 Drehzahlstufen 1.500–12.600 t/min; Anschluss 50 Hz 3×380 V; Leistung 3,2 kW; Abmessungen L3000×B1600×H1800 mm. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Werkzeugbau und Medizintechnik. Technische Daten ohne Gewähr

TBT T 120-3-250 ist eine Tieflochbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Drei Bohrspindeln, Bohrtiefe max. 400 mm; Bohrbereich Stahl Ø 2–10 mm; Aufbohren Stahl bis Ø 18 mm, Guss bis Ø 20 mm; Spitzenhöhe 180 mm; Spindelhub und Einspannlänge 700 mm; Tisch 1280×420 mm. Drehzahlen 3 Stufen 700–6400 min-¹; Vorschübe 15–500 mm/min; Eilgang 3 mm/min; 50 Hz 3×420 V; 4 kW; Gewicht ~2500 kg; Abmessungen 3450×900×1500 mm. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik. Technische Daten ohne Gewähr

IXION TL 600 NC 1 ist eine Tieflochbohrmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Bohrtiefe max. 600 mm, bis Ø 18 mm, Spindelhub 600 mm, Tisch 1375×700 mm drehbar 360°, Tragfähigkeit 2000 kg, Verfahrwege X 700 mm, Y 500 mm. Technische Daten: Spindeldrehzahl bis 4000 1/min, Werkzeugaufnahme SK40, Spindelmotor 2,3 kW, Anschluss 50 Hz 3x380 V, Gewicht ca. 2800 kg, Maße L4500×B1800×H2700 mm. Zubehör: Bohrfutter, Bohrfutter mit Innenkühlung, Digitalanzeige 2 Achsen, Kühlmitteleinrichtung. Erreicht enge Toleranzen; typische Branchen: Automobil, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr

and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-61

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-266

Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastics, aluminum, brass, and steel alloys Auction-ID: A7-49495-284

Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastics, aluminum, brass, and steel alloys Auction-ID: A7-49495-84

Set of bi-metal hole saws for metal and wood. These hole saws are used to drill precise holes in: wood, wood-based materials, plastics, aluminum, brass, and steel alloys Auction-ID: A7-49495-184

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-166

Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 connection, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, roof tiles and natural stone. Auction-ID: A7-49495-226

Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 connection, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, roof tiles and natural stone. Auction-ID: A7-49495-26

and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-161

Set of diamond hole saws in sizes from 6 to 12 mm. Equipped with M14 connection, suitable for angle grinders. Ideal for drilling holes in materials such as stoneware, ceramic tiles, clinker, roof tiles and natural stone. Auction-ID: A7-49495-126

9pcs concrete hole saw kit includes SDS Plus stud shank, pin and pilot bits. Auction-ID: A7-49495-66

and of 6 TCT hole saws for metal, in sizes 16-35 mm. The blades are made of sintered carbide, which is characterized by a hardness and resistance to high temperatures significantly higher than HSS high speed steel. Auction-ID: A7-49495-261

Control: SIEMENS drilling diameter: Ø 3 - 25 (18) mm turning speeds: 1000 - 6100 U/min bore slide stroke: 850 mm bore depth: 550 mm spindle distance: 240 mm dimensions: ca. 6 5 2,3 m Shipping weight: ca. 6000 kg Packing: ca. 10 Lademeter m : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-48648-73

Table dimensions ( x-y/mm) 1600 x 1300 Stroke ( X/mm) 2000 Stroke ( Y/mm) 1200 Stroke ( Z/mm) 800 Type of controll fagor 8065 Number of spindle per minute 0 - 6000 Accessories atc 40 tools Chuck connection iso 50 Number of axes 6 Features wise system

weight max.: 1 t stroke: / mm clamping width: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production number: 4201753783010 Operating voltage: 220/380 V Frequency: 50 Hz Nominal current: 10/7 A Punching force: 450 kN Table dimensions: 500 x 260 mm incl. matching accessories Reference: Baumstark - Lot 20 Auction-ID: A7-49882-71

Plate dimensions: 600 x 500 mm Measuring range of the height ripper: 600 mm Reference: Alesco - Lot 85 Auction-ID: A7-49882-52

mainly the manufacturer GÜHRING and BOTEK in different designs and sizes incl. workbench Reference: Alesco - Lot 47 Auction-ID: A7-49882-25

HBM 16-piece hole saw set – 19-127mm diameter, suitable for wood, plaster and plaster (2x) Make perfect round holes in different materials with the HBM sixteen-piece hole saw set. With the complete set, you can easily make smooth holes up to 25 mm deep. About the HBM 16 Piece Hole Saw Set Do you want to make smooth, round holes in wood or other material? Then choose this sixteen-piece hole saw set from HBM. Choose the right hole saw and use a cordless or drill to create the perfect circular hole without unsightly serrated edges. This way you can easily make holes to place taps, slide hoses through or to place light switches. Hole saws are widely used by construction professionals and DIY enthusiasts alike. With this hole saw set from HBM, make round holes in wood, plaster and plaster among other things. You may also know hole saws under the name hole saws, drill crowns, hole drills or ...

The set comes in a sturdy lockable box with various compartments where everything fits perfectly. Complete set with hole saws, hole holder, mounting plate and Allen key. The hole saws are made of sturdy metal. Auction-ID: A1-40897-81

core drilling diameter max.: 50 - 365 mm bore depth: 24500 mm swing diameter: 1600 mm full boring: 50 - 310 mm bed width: 1200 mm faceplate diameter: 1300 mm workpiece weight max.: 25 - 80 t diameter of main spindle in front bearing: 400 mm Height of centres: 800 mm turning speed range: 0 - 315 U/min main drive DC: 44 kW drill diameter: 500 mm feeds: 0,5 - 500 mm/min workpiece length - max.: 10.000 mm work piece power: 74 kW turning speed range - drilling: 120-600-2400 U/min hollow spindle diameter: 460 mm turning speed range: 30-600 U/min Control: total power requirement: ca. 200 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m modernised in 2002 and 2011 operates using the BTA process - - 2 roller mandrels 100–650 mm - 2 roller stands 650–1200 mm - Coolant system Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm ...

core drilling diameter max.: 50 - 365 mm bore depth: 24500 mm swing diameter: 1600 mm full boring: 50 - 310 mm bed width: 1200 mm faceplate diameter: 1300 mm workpiece weight max.: 25 - 80 t diameter of main spindle in front bearing: 400 mm Height of centres: 800 mm turning speed range: 0 - 315 U/min main drive DC: 44 kW drill diameter: 500 mm feeds: 0,5 - 500 mm/min workpiece length - max.: 10.000 mm work piece power: 74 kW turning speed range - drilling: 120-600-2400 U/min hollow spindle diameter: 460 mm turning speed range: 30-600 U/min Control: total power requirement: ca. 200 kVA weight of the machine ca.: - t dimensions of the machine ca.: - m modernised in 2004 operates using the BTA process - - 2 roller mandrels 100–650 mm - 2 roller stands 650–1200 mm - Coolant system Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4000 mm D 46 – 65 mm L = 600 ...

2.2 kW, equipped with emergency stop button, blade extraction, quick-release drill chuck 2-20 mm, 17 threaded clamping holes. A hand-operated ball-bearing drill reticle carriage with depth stop. Drill height adjustment numerically readable. Dowel / row drill device with 16-22-25-32 mm pitches, With left and right rotatable double adjustable stops with aluminum butt lugs, Clamping toggle can be positioned both left and right. With lighting. Auction-ID: A1-48994-21

Auction-ID: A1-50069-255

Auction-ID: A1-50069-256

max. workpiece dimensions: 840 x 460 x 350 mm max. workpiece weight: 150 kg Worktable dimensions: 600 x 300 mm X-axis travel: 350 mm,Y-axis travel: 250 mm Z-axis travel: 350 mm W-axis: 350 mm Rotation speed (C-axis): 300 rpm Reference: Schönichen - Lot 12 Auction-ID: A7-49882-409

Auction-ID: A1-50069-254

Auction-ID: A1-50069-253

Auction-ID: A1-50069-257

Punching force: 300 kN Projection: 610 mm Quick-change device Support table with stop and folding cam Range of tools is included in the price Weight: 1,300 kg

Hofmann long hole drill Manufacturer: Hofmann Type: LL160 Year: Specifications: Drilling dept.: max. 145 mm Drilling length:.: max. 240 mm Height adjutment: max.135 mm Drilling: Dept limitation stopper Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Power: 1,3 kW Drill clamp:: 5 – 20 mm