hole used for sale

We have for sale: 1 Holec SVS switchgeaar 17,5kV 800Amp busbar 3 motorized breaker feeders with Stucke protection relays 1 x fused loadbreak switch

Holex outdoor micrometer 300-400mm measuring range.

torque wrench, torque tool -Manufacturer: Holex Hoffmann, torque wrench 4 -20 Nm -Art.No.: 657277 26 -Torque: 4 - 20 Nm / 40 - 80 lbf.in -Shot: 9 x 12 mm -Transport dimensions: 270/50/H50 mm -Weight: 0.5 kg

amount: 9 STK weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-3/32-73 -Hoffmann Group No.: 302 460 50 -Weight: 3.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: HOLEX -Type: SK 50-2/20-63 -DIN: 2080 -No.: 0108016995 -Weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Holex, soft top jaw set 3-piece 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical. drawing -Dimensions: 145/105 / H55 mm -Total weight: 5.2 kg

Tool holder, tool holder, milling holder, milling tool -Milling holder: HSK 63 holder, 7 pieces -Type: different versions see photos -Price/tax: complete -Transport dimensions. 470/100/H95mm -Weight: 8.8 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5530 2000 -Measuring range: 0-2000 mm -Measurement accuracy: 0.01 mm -Dimension case: 2340/300/H60 mm -Weight: 9.6 kg

Dial gauge, zero adjuster, zero adjuster, zero adjuster -Manufacturer: Holex, zero adjuster type 359085 -Measurement accuracy: 0.01mm -Box dimensions: 165/120/H60 mm -Weight: 1.5 kg

Vernier caliper, caliper, vernier caliper, depth caliper -Manufacturer: Holex, digital depth caliper -Art.No.: 41 8540 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x caliper available -Dimension case: 400/135/H30 mm -Weight: 0.7 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper -Art.No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 2x calipers available -Price per piece -Dimension case: 465/180/H30 mm -Weight: 1.0 kg/pc.

Approx. Onsite Dimension. (l x w x h): 330 x 220 x 50 mm, weight approx.: 5 kg

Description: Quick-change insert set without safety slip clutch, 9 pieces, Thread range: M6 - M20, Description: Suitable for, especially with detachable tapping chucks, Note: Inserts with a slipping clutch are supplied with a torque setting for machining steel (Rm 600 - 800 N/mm2). The setting can be adjusted by adjusting the nut. weight approx.: 5 kg, Approx. Onsite Dimension. (l x w x h): 300 x 300 x 100 mm

Description: Inventory of hammers, Allen keys, files, screwdrivers, open-end wrenches, pliers, compasses, brushes, taps, twist drills and collets on Fridays Approx. Onsite Dimension. (l x w x h): 700 x 600 x 950 mm, weight approx.: 100 kg

Description: With a stock of screwdrivers, pliers, Allen keys, nuts, open-end wrenches, files and a manual torque wrench. Attention: paints, varnishes and liquids are not included in the scope of delivery! Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,000 mm, weight approx.: 100 kg

Description: Consisting of 2 pieces Measuring range: 16 - 20 mm Incl. extension and measuring rings Approx. Onsite Dimension. (l x w x h): 400 x 150 x 70 mm, weight approx.: 5 kg

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...

Mollart Sprint 500, deep hole drilling machine, Fanuc Power Mate control, Max L = 500mm, Dia 20 mm, Spindles: 2, Spindle rotation: 10000 RPM, 100 RPM counter spindle rotation, Max pressure 100 BAR, The machine can be inspected under power in our warehouse in Gussago BS., Mimu machine tools, Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilling technique., Deep hole drilling can employ various machine set-ups: rotating workpiece, rotating tool, or both tool and workpiece rotating. The most common, however, is for the workpiece to rotate,  ...

Deep Hole Drilling Machines Kramatorsk KJ1910 used machine but very good mechanical condition. Machine can be inspected in our warehouse in Gussago BS (Italy) Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 "MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 " MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

Offer consists of: - Hole unit HP-200A Horizon HP-200A Hole unit - Function: Pressing and punching - Number of holes: max. 4 holes; min. 2 holes - Hole spacing: max. 14mm; min. 9mm - Hole diameter: 6mm - Format: 356x508mm; min. 120x90mm - Processing strength: 4mm - Speed: max. 4000 brochures/h - Current: 230V / 50Hz - 0.68kW - Dimensions: 500x770x1035mm - Weight: 168kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Hoffmann frame and slotted hole drilling machine Product name: Frame and slotted hole drilling machine Type: HR 150 Manufacturer: Hoffmann Bohrsysteme Machine number: 15306 Year of construction: 1996 Condition: used, revised, checked Technical details: - Machine height: 1,260 mm - Machine length: 1,100 mm - Machine depth: 1,300 mm - Workpiece support: 1,100 x 240 mm - Workpiece clamping: pneumatic via foot valve - max. clamping height: 150 mm (standard) - Stroke of the clamping cylinders: 10 mm - Drilling plane adjustment (Z-axis): 100 mm (pneumatic) - Drilling stroke (Y-axis): 150 mm - lateral adjustment range of the drilling unit (x-axis): 330 mm - Drill holder: Special chuck with 2 tool change inserts (1x M10 and 1x 1600) - Drill with centering tip: - 2 pieces 8 x 50 mm, 1 piece 12 x 80 mm, 1 piece slotted hole drill 8 x 20 mm - Drill speed: 2,850 rpm -  ...

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Horizontal boring machine / slotted hole drilling machine / in perfect condition, ready for immediate use, immediately available With a tool diameter of 10 mm, a maximum hole depth of 160 mm and a milling length of 160 mm, this long-hole drilling machine from PEMAL MALBORK, type DWLA, is ideal for precise and demanding work. Specifications: - Tool diameter: 10 mm - Maximum hole depth: 160 mm - Maximum milling length: 160 mm - Adjustment: With front/rear drilling device - Table adjustment: up/down and sideways - Table rotation angle: +/-20° - Work table dimensions: 620 x 280 mm - Motor power: 1.5 kW - Dimensions: Length/width/height 1120 x 830 x 1200 mm - Weight: 300 kg The adjustment with front/rear drilling device as well as the table adjustment options offer maximum flexibility. The table can be rotated by +/-20°. The machine is in first-class condition and rea ...

Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools

Hole diameter maximum: 0 mm Grinding wheel diameter: 0 mm Workpiece height maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. work piece diameter: 220 mm Workpiece length min.: 50 mm Workpiece length max.: 1570 mm Min. work-piece diameter: 8 mm Table load max.: 120 kg Angle of the centre hole: 60 ° Taper in centre hole min.: 1 mm max: 60 mm Grinding spindle diameter: 32 mm Grinding spindle speeds with: abrasive wheel 15 mm: 45000 rpm abrasive wheel 27 mm: 22500 rpm abrasive wheel 48 mm: 13000 rpm Motor capacity: grinding spindle: 0.25 kW planetary stroke: 0.12 kW Max. grinding head traverse: 160 mm Voltage: 400 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1120 mm Width: 1070 mm Height: 1950 mm

Dowel hole drilling device: no; Drilling depth: 150 mm; Slotted hole length: 180 mm; Height adjustment: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 240 kg; Solid slotted hole drilling machine with 2 lever operation.

Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece  ...

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...

Dowel Hole Drilling Device: Yes; Drilling depth: 145 mm; Slotted hole length: 240 mm; Height adjustment: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 200 kg; Solid slotted hole drill with 1 lever operation.

Combined profiled steel shears and hole punch GEKA type HYD 80 / Hydracrop 80/A Masch. No. 9566 Year of manufacture approx. 2000 Punching force 80 ton. Projection 300 mm Punching up to 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm 4-point shears 45 x 45 mm Round material shears 45 mm Rectangular notchers up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz stop with el. Lifting release 500 mm - Work table with stop for the hole device 550 x 380 mm - Working height of the hole device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - Approx. 21 pieces of various punching tools - Operating instructions - Original painting, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 ton. very good condition; used

Manufacturer: CW Kreher Olbernhau Year built: unknown (1985) Engines: Hole circle 2.2 kW (from above) Drill 3 kW (from untrn) Hole diameter: approx. 60 to 300 mm Max material thickness: 80 mm Drilling diameter: max. 100 mm Drilling ties: max. 100 mm Rotation speed: 4 steps, adjustment via V-belts Usage: cutting out blanks for shells, plates or similar round turning parts for turning

Description Universal CNC deep hole drilling machine from Degen suitable for tooling, fixture construction, training as well as mold making Travel 750x700x600mm Control SIMATIC OP17 Technical data Universal deep hole drilling machine DEGEN UTB 600 E X,Y manual Z, NC control Axes with digital display Drilling depth max. 900 mm max. drilling diameter 25 mm Spindle holder MK2 Spindle drive 2.6 kW Spindle speed max. 3000 rpm Table adjustment lengthways 750 mm Table adjustment Cross 700 mm Drilling unit vertical 300 mm Drilling swivel +/-20° Table area 650 x 1100 mm Table swivelling by 360° Table load max. 2000 kg 2 separate cooling systems - Spray mist (single-lip deep drills) - Drilling emulsion (spiral drilling) With accessory package and glass protection

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...

Hydraulic hole punch PEDDINGHAUS Type Hydraulic 1000 Masch. No. 42068 752 83 004 Year of construction 1983 Punching force 100 ton. Hole diameter 30 in 20 mm Sheet metal 40 in 15 mm Sheet metal projection 510 mm Motor power 8.8 kW Rated power 380 volts, 50 Hz Hydraulic oil Tank capacity 80 litres - Coordinate stop table 1000 x 720 mm (self-made) - Punching saddle for dies max. 140 mm- Adapter for cutting insert 140 mm to 63 mm- Punch holder with union nut Stop in the projection up to 450 mm Side stop left 550 mm Side stop right 1300 mm - stroke infinitely adjustable - built-in punching tool approx. 34 mm space requirement of the machine L x W x H 1770 x 2000 x 2380 mm Machine width without stop rail right 1200 mm weight approx. 3500 kg good condition; used

Specifications: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm 2 x 68 , 2 x 80 , 81 , 85 mm - Long hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Stamp holder 58 mm - Stamp height 54 + 58 mm - Adapter ring for stamps - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for matrices 90 - 140 mm - Weight approx. 90 kg

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Deep hole drilling machine / deep hole drilling machine make LOCH type TB 2-11 / 300/2Fabr. -No: 182-300-1970, year of construction 1991Technical specifications:Max drilling depth with submersible spindle: 300 mmWorkpiece diameter / full drilling range in steel: 4 - 18 mmNumber of spindles: 2Drilling system: ELBDrilling method: rotating tool: counter-rotating workpieceWorking stroke, full + boring max .: 1000 mmCenter height: 249.9 mmMain spindle speed: 96 - 2500 rpm.Speed levels: 4Infinitely variable feed: 0 - 1000 mm / minRapid traverse forwards + backwards: 6 m / sec.Tapping feed rate: 60%Spindle mount: DIN 55022 Gr. 5Working pressure: 200 barMain drive motor power: 15/19 kWMotor power counter-rotating tailstock: 5.5 kWTotal weight approx .: 8.0 tfor further data see AWF cardwith- Control SIEMENS SPS-S5-115 U- 2 drilling spindles- chip conveyor- cooling deviceused, in good conditionPr ...

Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

spindle speed: 23; drilling distance: 32 mm; motor power: 1,5kW; drilling unit: swivel; The universal dowel hole drilling machine Ganner enables the drilling of bodies, frame connections, drawers, door panels, rows of holes or hole groups as well as the drilling of cabinet fittings.

C.W. Kreher Söhne KG slotted hole drilling machine LBFM Product name: Slotted hole drilling machine Type: LBFM I and II Manufacturer: C.W. Kreher Söhne KG Machine number: 4638 Year of construction: 1963 Condition: used, revised, checked Technical details: • Table size: 600 x 250 mm • Absorption sizes of the two-jaw chuck: • max. drilling depth: 160 mm • Max. travel in width: 200 mm • Height adjustment: 200 mm • Max. speed: by flipping the belts 2 speeds: 1,500 rpm and 2,800 rpm • Stop for 2 drilling depths • Clamping device: mechanical hold-down devices • V-belt dimensions: 15 mm x 970 mm • Weight: approx. 500 kg Special features: Instruction manual available Engine data: • Voltage: 380 V •Turn: • Current: 6.1 A • Power: 1.6 kW Machine dimensions (L x W x H): 1,200 x 1250 x 1450 mm Transport  ...

Spacer clamp with slotted hole, 60 pieces OBO BETTERMANN 733 Pg48 Article number: 1361 619 Clamping range: 53 - 61 mm slotted hole: Ø 6,2 x 10 mm Material: steel, galvanized material thickness: 1.5 mm Scope of delivery: 3 individual packages, each with 20 spacer clamps Other quantities on request ! New ! Dimensions ( fastening clamp ): 97 x 64 x 18 mm Dimensions ( single packaging ): 220 x 120 x 90 mm

Spacer clamp with slotted hole, 75 pieces OBO BETTERMANN 733 Pg29 Article number: 1361 384 Clamping range: 30 - 38 mm slotted hole: Ø 6,2 x 10 mm Material: steel, galvanized Material thickness: 1.5 mm Scope of delivery: 3 individual packages, each with 25 spacer clamps Other quantities on request ! New ! Dimensions ( spacer clamp ): 70 x 40 x 16 mm Dimensions ( single packaging ): 220 x 90 x 75 mm

Spacer clamp with slotted hole, 100 pieces OBO BETTERMANN 733 Pg13,5 Article number: 1361 201 Clamping range: 19 - 21 mm slotted hole: Ø 6.2 x 10 mm Material: Steel, galvanized Material thickness: 1.5 mm Scope of delivery: 2 individual packages, each with 50 spacer clamps Other quantities on request ! New ! Dimensions ( spacer clamp ): 50 x 31 x 14 mm Dimensions ( single packaging ): 170 x 110 x 80 mm

Hole saw assortment EXACT Eventus Bi-Metal Hole Saws General Assortment 2 in plastic case Art.-No. 06085 Ø 20, 25, 30, 35, 40, 45, 50, 68, 75, 83 mm 4-6 teeth per inch Dimensions: 280 x 235 x 85 mm

Deep hole drill, single-lip drill with internal cooling GÜHRING ZL-TLB-BR 14,5x480 K10 301032505 60112474 Diameter: Ø 14.5 mm Total length: 480 mm Groove length: 380 mm Shaft diameter: Ø 25 mm Shaft length: 80 mm New ! Dimensions ( deep hole drill ): 480 x 25 x 25 mm Dimensions ( transport box ): 485 x 38 x 34 mm