holder used for sale

Tool holder, milling holder, milling tool, collet holder, milling chuck -Manufacturer: Nikken, Multi-Lock Milling Chuck -Type: MCA50F-32HM-SL -Tensioning sleeve: Nikken KM32-16 -Dimensions: Ø 98 x 220 mm -Weight: 4.5 kg

16 pieces tool holder external machining 41 tool holders internal machining

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

The scope of delivery includes: 01x Holder for rear wall grille, used Manafacture: Axelent Material color: creamy white Diagonal length: approx. 215 mm Width: approx. 100 mm Protrusion: approx. 95 mm Material thickness: approx. 3.00 mm Slotted hole dimensions: approx. 55 x 8 mm Number of slotted holes: 02 pcs. Weight/ pcs.: approx. 0,37 kg

The scope of delivery includes: 01x Holder for rear wall grille, used Manafacture: Axelent Material color: creamy white Diagonal length: approx. 285 mm Width: approx. 100 mm Protrusion: approx. 150 mm Material thickness: approx. 3.00 mm Slotted hole dimensions: approx. 55 x 8 mm Number of slotted holes: 02 pcs. Weight/ pcs.: approx. 0,54 kg

Sorfort available refurbished nozzle holders, we also need all of them in stock.

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Inside holder: Ø 26 mm -Dimension: Ø 100 x 220 mm -Weight: 5.8 kg

Immediately available refurbished shower holders, even used ones we have all in stock

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Support length: 80 mm -Clamping height: up to approx. 15 mm -Dimensions: 80/33/H90 mm -Weight: 0.6 kg

collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Holder for oil filter MWM 232 for sale Mann & Hummel Part Number: 6751283106 MWM Part Number: 2404242170

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Milling tool holders: 8 pieces MK4 tool holder -Sizes: see pictures -Price: complete -Box dimensions: 630/330/H60 mm -Weight: 20.5 kg

Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.

tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, chuck for collets SANDVIK COROMANT BD 225 AN ( BD225AN ) 10-27-1528-42003 Inner diameter: Ø 33 mm Dimensions: 138 x 86 x 86 mm

Articulated Arm with Dial Gauge Holder PAGUS Dial Gauge Holder: Ø 6 / 8 mm Cross Arm Length: 285 mm Vertical Arm Length: 100 mm Thread Vertical Arm: M10 New ! Dimensions: 290 x 60 x 85 mm

Morse taper / drill chuck holder PAGUS MK5

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures -Sale: only complete -Weight: 12 kg

Tool holder, milling holder, milling tool -Recording: MK4 -Length: 1103 mm -extendable to: 440 mm -Measurements see: drawing in the photos -Weight: 12.9 kg

Tool holder, milling holder, milling tool -Recording: MK3 -Length: 973 mm -extendable up to: 440 mm -Measurements see: drawing in the photos -Weight: 11.1 kg

Shaft with tool holder MK4 PAGUS Tool holder MK4 345756 60.000000.00200 2 Ball bearing sets: Ø 90 / 80 mm Flange diameter: Ø 115 mm New ! Dimensions: 250 x 115 x 155 mm

Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Steel holder, clamping plate with T-slot -Holder: 36 - 39 x 18 x 75 mm -Dimensions: 145/135/H170 mm -Weight: 4 kg

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Lattenbreithalter M.M. T.L. Slatted Wideholder Stainless Steel 3600 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm Hole Spacing: 80 x 80 mm New ! Dimensions: 3800 x 170 x 170 mm

Magnetic holder, alignment aid for tapping drills HELD Ø 3.5 - 4.5 - 6 - 7 - 9 - 11 mm ( Ø3.5-4.5-6-7-9-11mm ) DIN 352, 371, 376 im Holzkasten gebraucht, geprüft ! Dimensions: 195 x 100 x 70 mm

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

Lattenbreithalter M. T.L. Slatted Wideholder Stainless Steel 3700 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm Hole Spacing: 80 x 80 mm New ! Dimensions: 3900 x 170 x 170 mm

width: 500 mm height: 300 mm depth: 570 mm CNC-Table Attachment Frame Producer: KOCEL Type: 2755 YOM: new Width: 500 mm Depth: 570 mm Height: 300 mm Weight: ca. 9 kg Number of CNC-tool holder slots: 16 Colour: RAL 5015 blue Additional information: - Patented, innovative universal-plug-in system: - Size adjustment of the tool holder slots as required - So again and again possibility of newly arranged storage of 16 tool holders in this table attachment frame - Whether SK 30, SK 40, SK 50 tool holders or even HSK 16, HSK 32, HSK 40, HSK 50, HSK 63, HSK 80 tool holders, thanks to the new and user-friendly plug-in system, inconvenient and inflexible storage of different tool holders are a thing of the past. • The frame is a solid steel-sheet metal construction and was welded firmly No Tool Holders included! The data for this ad was created with ModulMWS - the software solution of Log ...

Cutting Clamp Kit, Hand Pipe Tap, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for cutting head: Ø 90 x 22 mm -Dimensions: 950/108/H38 mm -Weight: 3.2 kg

Quick-change tool holder, tool holder head, quick-change tool holder -Recording dimensions: see photos -Dimensions: 133/55/H113 mm -Weight: 2.8 kg

Quick-change tool holder, tool holder head, quick-change tool holder -Mounting dimensions: dovetail width 39 mm see photos -Price per piece -Quantity: 3 pieces -Dimensions: 86/38/H60 mm -Weight: 0.8 kg/piece

Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm

miscellaneous Different holders with Recordings

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Dimensions: 75/40/H60 mm -Weight: 0.7 kg/piece

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

Tool holder, milling holder, milling tool -Number: 3x SK40 holders -various: versions -Sale: only complete -Weight: 6 kg

Tool holder, reducing sleeve for MK tools with tightening thread BENZ GmbH D 45 x 4 x 90 ( D45x4x90 ) 024.064 4 90 SK 45 Tool: MK 4 Dimensions: 173 x Ø 83 mm New !' Dimensions(Packing): 240 x 90 x 90 mm

Fully automatic bottle display with format star for e-liquid bottles, output approx. 30-40 cycles / min.

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Shaft: Ø 50 x 95 mm -Inside diameter: 40 x 90 mm -Dimensions: 215 x 80 x 110 mm -Weight: 5.5 kg

Tool holder, reducing sleeve for MK tools with tightening thread BENZ GmbH D 45 x 1 x 45 ( D45x1x45 ) 024.064 1 45 SK 45 Tool: MK 1 Dimensions: 128 x Ø 83 mm New !' Dimensions(Packing): 240 x 90 x 90 mm

HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use