holder used for sale

unused consoles o.a.., presumably to make "HOLDER". material thickness 10 mm € 200,-net + 19% VAT

Multifix steel holder head Manufacturer MIVESA - the original Size C Location hole for Multifix on the support, diameter 23 mm Weight: 11 kg Very good condition

Compact tractor with selectable four-wheel drive, infinitely variable hydrostatic travel drive, Diffentialsperre, 3-cyl.-Kubota diesel engine, 15 kw/20 HP EZ 5/95, only about 350 hours of operation, cabin, heating, power steering, turf tyres, Front hitch, front PTO, 2 x hydraulic connections front. Rear three point linkage, rear PTO 540/1,000 rpm. Complete with vehicle and good battery! Needs service, otherwise good machine. Price ex. export € 7.900 / / in Germany plus 19% VAT price € 9.401,- Equipment optional at extra charge available, E.g. snow blade, broom, centrifugal spreader roller spreader. We supply used winter maintenance technology - Holzhäcksler - engines and more - see photos!

Containers for sweeping, mowing, watering and washing 2-broom system with individual broom control Mower Just over 600 hours ENGINE Perkins 3-cylinder 4-stroke diesel Displacement 1131 cm³ Power 19.7 kW (27 hp) Torque 70.2 Nm Nominal speed 3000 rpm Water cooling Fuel tank capacity 27 l Hydrostatic drive, infinitely variable speed control, four wheels of the same size Maximum speed 27 km/h Hydraulic service brake on the front axle, acts on all four wheels via the hydrostatic drive, mechanical parking brake on the front axle by means of two drum brakes HYDRAULICS 1st circuit infinitely variable up to 33 l/min 2nd circuit up to 58 l/min Hydraulic oil quantity 19 l Lifting capacity front 500 kg WEIGHT Including driver with 75 kg, depending on tyres and equipment Curb weight 1101 kg Permissible total weight 2000 kg Permissible axle load front 1190 kg / rear 1190 kg Drawba ...

Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Manufacturer: GK, quick-change turning tool holder HB1136 -Shooting dimensions: see photos -Clamping length: 200 mm -Quantity: 1x holder available -Dimensions: 200/60/H140 mm -Weight: 3.6 kg

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Manufacturer: GK, quick-change turning tool holder HB1136 -Shooting dimensions: see photos -Clamping length: 200 mm -Quantity: 1x holder available -Dimensions: 200/60/H140 mm -Weight: 3.6 kg

Turning tool holder, steel holder, turning tool, turning tool holder, tool holder, axial tool holder, change holder -Turning tool holder: tool holder 43 pieces -Tool holders: different versions -Inlay prism: 110/94 mm -Dimensions: see photos / technical. drawing -Levy/Price: complete -Transport dimensions: 1200/800/H200 mm -Weight: 450 kg

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, steel holder -Quick-change turning tool holder: Multifix CD 40170 -Type: Size C -Shooting dimensions: see photos -Clamping length: 170 mm -Dimensions: 170/70/H155 mm -Weight: 3.9 kg

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, steel holder -Quick-change turning tool holder: Multifix CH 40160 -Type: Size C -Shooting dimensions: see photos -Clamping length: 160 mm -Dimensions: 160/70/H140 mm -Weight: 3.6 kg

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Quick-change boring bar holder: clamping diameter 44 mm -Shooting dimensions: see photos -Dimensions: 144/72/H155 mm -Weight: 2.9 kg

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Quick-change turning tool holder: 16 B 1 -Shooting dimensions: see photos -Clamping height: 40 mm -Support length: 200 mm -Quantity: 2x holders available -Price per piece -Dimensions: 200/65/H150 mm -Weight: 3.6 kg/piece

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick-change turning tool holder: DB 2003 -Recording dimensions: see photos -Clamping length: 220 mm -Dimensions: 220/105/H140 mm -Weight: 10.1 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick change boring bar holder: DB 2004 -Recording dimensions: see photos -Clamping diameter: 55 mm -Clamping length: 220 mm -Dimensions: 220/140/H130 mm -Weight: 9.2 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick-change turning tool holder: DB 2001 -Recording dimensions: see photos -Clamping height: 60 mm -Support length: 220 mm -Number: 2x holders available -Price: per piece -Dimensions: 220/95/H180 mm -Weight: 9.3 kg/piece

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, quick change head -Quick-change steel holder: quick-change head size. B with base plate -Division: 40-fold -Dimensions: 190/140/H150 mm -Total weight: 9.4 kg

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, cutter head holder, milling arbor -Cutter head holder: 3 pieces milling arbors, unused Ovp -Type: G342 40 x 22 x 50 DIN 69871-A SK 40x22x50 -Adjustment: SK40 -Price: complete -Dimension total: 220/72/H150 mm -Weight: 4.2 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc.

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Number: 24x different recordings -Manufacturer: from Komet and ES -Sale: is only sold as a whole -Price: complete -Weight: 45 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling holder SK40 2 pieces with accessories -Type: NCGFLK 160-AD B40 -Price/delivery: complete -Dimensions box: 240/155/H75 mm -Weight: 3.9 kg/pc.

Collet holder, tool holder, tool holder, milling holder, milling tool -Milling adapter: SK50 5 pieces -Type: different versions see photos -Tool holder: Ø 12/14/16 mm -Price / fee: complete -Dimensions: 400/300 / H160 mm -Total weight: 19.1 kg

Measuring stand, tripod, dial gauge holder, dial gauge, test stand, dial gauge holder, precision measuring table, precision measuring table, micrometer holder -Measuring tool holder: holder for outside micrometers, adjustable -Dimensions: Ø 150 x 115 mm -Weight: 1.7 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, driven tool, bar gripper, thread cutting head -Manufacturer: Sandvik, 17 pieces turning tools with tool stand -Socket: Ø 40 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/660/H500 mm -Weight: 25.6 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Milling adapter: SK50 2 pieces -Tool holder: Ø 32/16 mm -Price: complete -Dimension total: 355/180/100 mm -Total weight: 10.4 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

Attachment holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, attachment holder -Manufacturer: Kampf, clip-on holder A19 TGL 30-1226 -Recording: MK4 -Price: per piece -Number: 24 piece -Dimension: Ø 34 x 350 mm -Weight: 1.6 kg/piece

Attachment holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, attachment holder -Manufacturer: Kampf, clip-on holder A22 TGL 30-1226 -Recording: MK4 -Price: per piece -Number: 21 piece -Dimension: Ø 40 x 370 mm -Weight: 1.8 kg/piece

Attachment holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, attachment holder -Manufacturer: Kampf, clip-on holder A27 TGL 30-1226 -Recording: MK4 -Price: per piece -Number: 19 piece -Dimension: Ø 46 x 390 mm -Weight: 2.2 kg/piece

Attachment holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, attachment holder -Manufacturer: Kampf, clip-on holder A13 TGL 30-1226 -Recording: MK3 -Price: per piece -Number: 14 piece -Dimension: Ø 24 x 295 mm -Weight: 0.8 kg/piece

Attachment holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, attachment holder -Manufacturer: Kampf, clip-on holder A16 TGL 30-1226 -Recording: MK3 -Price: per piece -Number: 11 piece -Dimension: Ø 28 x 310 mm -Weight: 0.9 kg/piece

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 32x38 mm -1x holder: Ø 50x45 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -1x: holder suitable for tool changer -Sale: only complete -Weight: 8 kg

used, tested, good condition listed price / per holder Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior holder for collets ER32 Outer diameter 60 mm Nut for ER collets Total length : 63 mm Delivery incl. 1 tightening bolt / tool. Image: 8031 Absorbed SK 40 DIN 69871 with collet chuck ER 40 Manufacturer: DIEBOLD or KELCH Inside.- :Holder for ER 32 collets Outside.-: ø 65 mm nut for ER collets Length : 63 mm Supplied with tightening nut, with tightening bolt. Images 8032 Absorbed SK 40 DIN 69871 with collet chuck ER 32 Manufacturer: KELCH predominantly Interior hold ...

Tool holder, tool holder, milling holder, milling tool -Milling holder: HSK 63 holder, 7 pieces -Type: different versions see photos -Price/tax: complete -Transport dimensions. 470/100/H95mm -Weight: 8.8 kg

Tool holder, tool holder, milling holder, milling tool -Milling holder: SK40 holder, 8 pieces -Type: various versions / dial indicator deburrer angle cutter... see photos -Price/tax: complete -Transport dimensions. 460/230/H90mm -Weight: 12.8 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Take: Ø 32 -Tension sleeves: 4/6/10/12/14 mm -Weight: 1 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Inside diameter: 62 mm -Dimensions: 130/100/H86 mm -Weight: 3.7 kg

Pneumatic cylinder holder, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: H - 32 -Quantity: 40 pieces available -Price: per piece -Minimum order: 3 pieces -Weight: 0.3 kg/piece

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: SNG-50 TN 32 970 -Number: 12 pieces available -Price: per piece -Weight: 0.3 kg/piece

Pneumatic cylinder holder, bearing block, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: LSN-160 -Weight: 6 kg

Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: SNGB-160 TN34547 -Number: 2 pieces available -Price: per piece -Weight: 3.3 kg/piece

Pneumatic cylinder holder, air cylinder holder, pneumatic stamp holder, air stamp holder -Type: 1 827 001 272 -Quantity: 35 pieces available -Price: per piece -Minimum order: 3 pieces -Weight: 0.2 kg/piece

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings -Manufacturer: Komet -partly with internal water cooling -Weight: 12 kg

Short clamp holder, clamp holder, tool holder WIDIA WIDAX SCLCR12CA12 227.10.211 New ! Dimensions ( clamp holder ): 52 x 18 x 16 mm Dimensions ( transport box ): 88 x 24 x 24 mm

Short clamp holder, clamp holder, tool holder WIDIA WIDAX 215.55.410 215 55 410 E215554100000 100012497 New Dimensions ( clamp holder ): 42 x 31 x 22 mm Dimensions ( transport box ): 88 x 38 x 38 mm