hol monta used for sale

Key data: 45 °, 2800 mm, 1000 mm

Weight approx. 1140 kg Connected load 380V 7.5kW Scoring unit 0.75 kW manually adjustable by pneumatic connection high and lowerable Trimming length 2800 mm Speeds: 600/5000/4000/3000 rpm via V-belts Electric swivel with digital display Electric height adjustment with digital display Cutting width 1000 mm 23S9Fmzq rear support table 950 x 400 mm wide Angle stop 2500 mm with extension 2840 mm with 2 stops Suction port 120mm + 80 mm for PSV Parallelogram protection device with narrow and wide hood Edging stop

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOLYTEK YOM-110 Orbital Drill Oscillation width max 110mm Maximum hole depth 50mm Spindle speed 9500r.p.m Table tilts up to 20° Tools clamped with a clamping basket CE Certified

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Holch MHS 501-Super water-cooled -Length: 6.35 m -Weight: 5.1 kg

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Top control panel Edge Feeder 1902 Glue application station 1906 Chopping shears 1902 Printed work 1816 Cross-cut unit 1918 Milling unit 1942M Rounding scraper blade 1929 Shape milling unit 1983 Wing scraper blade 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Length approx. 5300 mm

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, -Manufacturer: Holac, cutter knife -Type: 29-0228-0/1 -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm -Weight: 4.4 kg

Key data: 5 mm, 6 mm, 4425 mm

Electricity connection 400V / 11kW Extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, rolls 3 mm Edge magazine 1301 with DAZ 11 Glue station 1906 Printing unit 1914 Cross-cut unit 1976 Milling unit flush 1942 Milling unit Radius R2 1943 Ziehklinge 1927 Buffing unit 1944

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK -Art.No.: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

Key data: 45 °, 1600 mm, 1000 mm

Connected load 380V 10A Motor power 4kW Edging table length 1600 mm Saw Blade-D. 315 mm Cutting height 90 mm Extraction 1x120mm 1x60mm (on extraction hood) Cutting width 1000 mm Table extension 400x400mm Rip fence with fine adjustment Edging frame with angle mitre stop Manual lifting and swivelling of the saw blade Saw blade tilt indicator 1x switch for direct starting of the main engine Saw blade protection cover

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Key data: 5300 mm, 2100 mm

Power sawing unit 4.6 kW Cutting length 5300 mm Cutting height 2100 mm Cutting depth 80 mm Total machine height 2900 mm Strip attack Weight approx. 700 kg Saw blade Ø 300 mm Hinged rail

Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, Roofing nails, nail rolls, 1 carton/ approx. 7200 pieces -Type: 3.0x22 A2 stainless steel -Price/Sale: complete -Dimensions: 490/300/H140 mm -Total weight: 12.6 kg

Corner milling machine, radius milling machine for machining the corner edges. Banding thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. pull-out workpiece support Dimensions: approx. 700 x 600 x 1300 mm Weight: Approx. 140 kg Suction nozzle: 70mm

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Holex, Bi-metal saw band unused -Type: 173605 5/8 -Length: 2710 mm -Number: 7 sheets available -Price: per piece -Transport dimensions: Ø 300 x 40 mm -Weight: 0.5 kg/piece

Extension for square, square extension, tap extension, thread cutter extension -Square extension: Tap extension Thread cutter extension -Square: 32 x 32 mm -Total length: 285 mm -Number: 2x extension available -Price: per piece -Dimensions: Ø55 x 285 mm -Weight: 3.1 kg/piece

Producer : Windmöller & Hölscher Type : QMS 8510 dismantled and stored Colours : 4 colors, CI With doctor blades Print width : 800 mm Repeats : from 23 – 80 cm There are approx. 300 air sleeves with the machine - size unknown Speed : 150 metres/minute Un-/rewinder : max. 1.000 mm With length slitting Cliché is 2.84 mm thick Find more here - /

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - / Contact us at -

Wood Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for roll and strip goods Glue application station: cartridges + PU gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit for roll and strip goods up to 3 mm (6mm) edge thickness with conversion of 0-10° bevel of the cross-cut saws Milling unit, flush milling, radius milling, chamfer milling - 15° Scraper unit for chamfers and radii Surface Scraper Unit - Finish Machine is CHECKED in TOP CONDITION from very well maintained craft business from stock Lieboch

4 hole paper drilling machine, with serial equipment and drill bits. In production ready condition. On pallet: 120 x 80 x 10 cm

Key data: 4100 mm, 80 mm

Holzma Panel Saw Cutting Length 4100mm Cutting Depth 4500mm with Vorritz Agregat Machine works perfectly

Key data: 45 °, 2600 mm, 500 mm

400 V, 50 Hz, 2.2 Kw, Cutting height 100 mm, Cutting width 500 mm (extension table + 900 mm added, but the customer shortened the round bar from the rip fence), Sliding table 2600 mm, max. saw blade 315mm, Work table 1060x330 mm, Table extension 390x330 mm, Table extension 900x810 mm, Boom table 1050x630 mm, Cut-to-length stop up to 2800 mm, Height and angle adjustment manually, Extraction connection 100 mm, Hold Operating tools, Spare straps

Depaneling machines manufactured by Holzer GMBH for sale. Model Low 4233 D XXL Year 2015 - Large work surface: 700 x 400 mm - Rigid welded steel frame - Highly dynamic linear motor axis - Quick product change possible - Flexible PCB mounting systems - Cutting process with discs and / or shank tools - Separates any PCB material - Laser axis measurement - Individual special sizes possible The highly dynamic depaneling machine LOW 4233 XXL is especially suitable for medium to high product volumes and meets growing requirements in the production process. Printed circuit board benefits from a wide variety of materials which are made using low-dust and low-stress sawing and milling techniques with the highest product flexibility, precision and throughput separation. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine ...

Hollanders - ColorEdge 230 Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system specially developed for the precise cutting precise cutting of textile materials. With a working width of 230 cm, This machine is ideal for roll-to-roll applications and guarantees clean, precise cuts, that meet the highest demands. Technical highlights: - Working width: Up to 230 cm. - Cutting technology: High-precision roll-to-roll cutting for even and accurate results. results. - Material compatibility: Suitable for a wide range of textiles (e.g. polyester). - Operation: Simple and efficient processing for maximum productivity. - Construction: Robust, durable design for continuous professional use. - Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts renewed - PVC transport rollers (11/2023)  ...

Stop square, locksmith square, control square -Manufacturer: Holex, stop angle DIN 875/1 -Type: 452510 100 x 70 mm -Accuracy level: 1 -Dimensions: 105/70/H20 mm -Weight: 0.3 kg

The scope of delivery includes: 01x Wooden beams, used Species: Spruce / Fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | Pcs.: approx. 25.67 kg The price shown corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Table milling machine HOLZKRAFT t 45c LL With table extension on the right and left, as well as pull-out workpiece support ---------- Technical data ---------- Table size: 1,945 x 695 mm, max. spindle protrusion over table: 130 mm, useful length milling spindle: 100 mm, max. retractable milling cutter Ã: 180 mm, speeds: 3,500 / 7,000 / 10,000 rpm, motor 400 V: 6.6 hp / 5.0 kW, suction nozzle Ã: 2 x 120 mm - special price - - new exhibition machine -

Single-head welding machine, single-head welding machine, fighter welding machine, butt welding machine -Voltage: pneumatic -Weight: 270 kg

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Wood - Briquetting press Amis ABP 60 L-exhibition machine- ---------- Technical data ---------- Briquette Ã: 60 mm, hydraulic power unit 3 kW: 140 bar, voltage: 400 V, frequency: 50 Hz, fuse: 16 A, power approx.: 20-35 kg/h, weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as desired (max. 60 mm) - Motor equipped with motor protection switch and emergency stop- No electronic components such as controllers, sensors and sensors or complicated controls

Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg

Manufacturer: HolzHer, Type: 1444, Year: 1991, Min-max feed m/min: 10 - 20, Premilling: yes, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Top pressure belt/roller: Rolle, Year :1991

Manufacturer: Holzher Vorschub 3 Rollen, Type: ET 117, Feeding by rollers: 3 Rollen, Technical data:: 0,75 , Speeds: 4, Deflection of the pendulum axes mm: ca.25 mm,

Manufacturer: Holz-Her Fräsständer, for left machine side: links, Number of motors: 2, kW-Leistung : 2,2, Drehzahlen U/min : 11600, Horizontal Rollentastung : yes, Vertical roller sensing: yes,

Manufacturer: Holzma, Type: Digimatic,

Manufacturer: Holzma , Type: HPL 380 43/22, Year: 2010, Optimisation: yes, Max plate format mm: 4300 X 2200, Min-max plate thickness mm: 6-40, Cutting lenght mm: 4300, Working hight mm: 95, Vorschub Sägewagen : 150, Pressure beam control: yes, Network-capable: yes, Angle pressure fixture: yes, Saw Blade Diameter mm: 380, Number of clamping tools: 7, Feeding from back side: yes, FREE TEXT: Spannsystem Sägeblatt Powerlook/Voritzer gesteuert für Postforming Platten, Year :2010

Key data: 45 °, 3200 mm, 1450 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...