hol monta used for sale

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

grinding diameter: 850 mm grinding length: 6000 mm centre height: 425 mm grinding wheel size: 750 x 100 x 305 mm table - swivable: -2 / +2 Grad table load capacity: 3000 kg chucking diameter: 315 mm grinding head swivelling: 90 Grad spindle taper MT: 6 spindle speeds: 12 -300 mm grinding head - power requirement: 22 kW Control: Siemens 840D grinding wheel head adjustable: +30 / -10 ° total power requirement: 41 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 16,0 x 4 x 2,1 m - Siemens Sinumerik 840D CNC control - SBS balance system - INTERNAL GRINDING DEVICE - 4 support steady rests - Tailstock - Coolant system - Electronic hand-held control panel - Ball screws X-Z - Pneumatic quill stroke - Paper belt filter device - Oil mist extraction device - Full protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm ...

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment demonstration machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable f ...

A canister filling system for the food industry is available. Dosing system: piston dosing unit, container: 80l, dosing cylinder: V4A, control: Knorr, filling range: 1000l-10150l. Documentation available. On-site inspection is possible.

This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information.

This ITEM Montageplatz Venta was manufactured in 2022. It features a drive-free goods carrier assembly system based on the Karakuri principle, with an automated product carrier return. The modular design allows for easy modifications, adhering to standardized industry standards. It includes an ESD floor and two Deprag screwdrivers controlled via worker guidance. Contact us for more information about this machine.

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Assembly station, assembly device, vacuum assembly device -Manufacturer: reis, mounting station with suction cup holder -Control: Siemens simatic -Suction cups: 6x Ø 165 mm -Platform: stroke 300 mm -Previous use: Production of solar panels -Individual components: see photos -Number: 2x mounting device available -Price per piece -Dimensions: 2620/1860/H1210 mm -Weight: 2000 kg/pc.

1 complete CIP system for dairies with 5 CIP pressure and return lines and automatic valves NW 65 and 100 6 horizontal tanks, standing on 4 feet, insulated, Diameter 2.65 m, height 3.40 m constantly brought up to date, with Siemens S 7 control system, in 4 control cabinets Year of manufacture 2001 with 1 horizontal caustic soda storage tank, double-walled, capacity 10,000 l with a black P100 nitric acid conc. Storage tank, double-walled, capacity 6,200 l

Stainless steel tank with cladding, mounted on a transport frame., Additional title: Horizontal, cladded stainless steel tank, Capacity: 4000 l, Pressure: 0,99 bar, Length: 3,25 m, Width: 1,4 m, Weight: 600 kg, Material: stainless steel, Position: horzontal, Base construction: transport frame, Features: insulation, inlet DN 50, outlet DN 40

NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy), Counter rotation: Yes, Drlling depth: 10000 mm, Max workpice weight: 25 ton, Spindle motor: 90 kW, Counter rotation motor: 92kW

Ritai 800L holding vessel Stainless, 800L capacity, jacketed vessel, holding tank, central bottom discharge

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 180 mm; Elongated hole length: 240 mm; Height adjustment range: 160 mm; Motor power: 2.2 kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 260 kg; Work table can be rotated by 60 degrees on both sidesSimple operation via one-hand lever for fast and precise workDrill head mounted on double guideClamp stops allow easy and quick adjustment of the drill head runHeight adjustment of the drill head via handwheel with numerical

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Slotted Hole Drilling Machine Holzkraft Type LLB 16 H Item No. 532 6617 Year of construction 2010 With dowel device Table size 500 mm x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Wescott Drill Fiutter 0-16 mm Speed 3000 rpm. Motor power 1.1 kW Table fixed Drilling unit movable Weight 120 kg

8-color format: 1270 mm<br><br><br><br<br>br>

<br>Machine completely renovated; Pipe length: 56-164 cm Tube width: 35-70 cm Lower width: 7.7 - 22 cm 1 or 2-valve units Gravel-press-Gértel Option: S-compression G'rtel, Icoma<br><br><br>br>Verf Gbar: now

<br>Tube length: 48-140 cm Pipe width: 30-70 cm Lower width 7-16 cm 1 valve Lower Patch Unit 1 or 2 color at the bottom patch Gravel presses Option: S-Presses, Icoma<br><br>Still in operation: Yes<br>Verf Gbar: now

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once

<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once

Central cylinder 8 colors Chambered doctor blade etc.

8 colors

Compact tractor with selectable four-wheel drive, infinitely variable hydrostatic travel drive, Diffentialsperre, 3-cyl.-Kubota diesel engine, 15 kw/20 HP EZ 5/95, only about 350 hours of operation, cabin, heating, power steering, turf tyres, Front hitch, front PTO, 2 x hydraulic connections front. Rear three point linkage, rear PTO 540/1,000 rpm. Complete with vehicle and good battery! Needs service, otherwise good machine. Price ex. export € 7.900 / / in Germany plus 19% VAT price € 9.401,- Equipment optional at extra charge available, E.g. snow blade, broom, centrifugal spreader roller spreader. We supply used winter maintenance technology - Holzhäcksler - engines and more - see photos!

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

Table dimensions: 850 x 300 mm. abrasive belt width: 150 mm. abrasive belt length: 2510 mm. abrasive band speed of 16 m/s. Ver ? laipsn suportas angle is 90. Engine power: 2.1 kW. Stakl ? weight: 148 kg. Made In Austria.

Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Motor power: 2,25 kW. Output: 3880 m3/h. Diameter of connection hole for aspiration pipe: 3 x 100 mm. Bag capacity: 2 x 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 64 kg.

Motor power: 1,5 kW. Capacity: 2480 m3/h. Diameter of connection hole for aspiration pipe: 100 mm. Bag capacity: 300 l. Total height: 2400 mm. Impeller ? riveted stainless steel. Weight: 51 kg.

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

7 color<br><br><br>Still in operation: Yes<br>Available: immediately

Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once

Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once

Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now

Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now