We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,582 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Type: Holac VA 90 Loading sections (L x W x H): 400x100x80 mm Cutting length: 1,0 – 30,0 mm Saw blades 3 set, 4x4 mm, 10x10 mm, 18x18 mm Capacity: up to 2500 kg/hour Electric power: 8.0 kW Machine dimension in cm: Width: 180 cm Lenght: 90 cm Height: 225 cm Delivery time: 10 working days after advanced payment
used
W+H Matador 26 flat & satchel bags making Beater type Repainted in May 2019 No photocell Speed: approx: max speed 450 bags Visible in production
used
used
Vacuum lifter for wood make FEZER type Vacofix 274700Machine No: 83355 Year 1987Load capacity: 360 kgCarrying length: 5000 mmDead weight: 480 kgDimensions approx .: 5000 x 1800 x 700 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
used
used
ufo wooden tongs Vict/kg 335/3.7
used
This HOLZHER PRO MASTER 7018 Wood Working was manufactured in the year 2020 in Austria. Has never been used.
new
Holtrop Jansma clean air extraction with rotary lock, fire protection device, autom. Fire extinguisher & fire damper Brand: Holtrop Jansma Type: MSO400 ZRSL Year of construction: 2022 M-No.: W0061083B, Clean air extraction: MSO 400ZRSL Intake manifolds: ø400 mm Length: 3,650 mm Width: 1,230 mm Height: 3,270 mm + 1,500 mm Weight: 1,000 kg Capacity: 11,000 m³/uur Pressure: 1,965 Pa Power supply: 11 kW, 380V, 3Ph, 50 Hz Filter surface: 69 m2 Length of filter tubes: 1,450 mm Filter tube diameter: 200 mm Cleaning: included Return air duct: 500500 mm Noise: 80 dB(A) Flame Protection Fire Extinguishing Device:: Includes: automatic powder fire extinguisher Automatic flame protection flap in the return air duct automatic shutdown of the fans Check valve in the intake line Vibrating device: Incl. programmed Switchboard Turnstile: DRSL-3000 Dimensions of di ...
new
SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201
used
used
Holac dicer, chamber: 115 mm x 115 mm, total dimensions: 1870 mm x 1100 mm x 1980. Including pallet with extra parts.
used
Key data: 1200 mm, 1200 mm
Parcel cross-cut saw 6,00m similar. PRINZ HOLTEC electric length adjustment and saw feed, immediately available, ready to use! fully functional, fully operational, partially dismantled; Model: Cross-cut saw from Haskin AB, Swedish manufacturer; many parts are identical in construction to PRINZ systems - Year of construction: approx. 1996 - Max. package length: 6.00m - Dimensional tolerance: +/- 2 mm - Max. package dimensions: 130cm x 130cm x 6000mm - Hydraulic length adjustment for saw positioning - Hydraulic cutting feed (up, down) - Length adjustment with digital display to 1/10 mm (mm) - kerf width can be stored as offset value (kerf is included!) - Feed of the length positioning (FORWARDS/BACKWARDS) is infinitely adjustable depending on the direction (!) - Cutting feed/speed of the saw blade (UP/DOWN) is infinitely adjustable in each direction (!) ...
used
new
Wood power KSO 150F Edge Grinder Grinding unit can be swivelled up to 45° via lever The machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better grinding results Oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable grinding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table widening With rubberized grinding roller Veneer edge grinding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved inlet ruler for veneer protrusions Quick changeover from veneer edg ...
new
Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...
new
Holzstar KSO 850 Edge grinding machine With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the ...
used
- Machining width max. 800mm - Workpiece thickness Max. 80mm - for further technical data see PDF
used
Alu Swivel knife head 120x40x30 Folding knife HM G&-4980-M3A6J
used
-Exhibition machine- Machining length 3,200 mm (without additional support of the workpiece) Vertical machining center for drilling, milling and grooves. Highest flexibility and universal range of application with the smallest space requirement. Modern industrial design built from quality components with an optimal field of view of machining and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides Ball screws in X, Y and Z direction for precise positioning and for perfectly fitting workpieces. Workpiece-friendly clamping system by means of vacuum suction cup (2 x 80/80 and 2 x 80/40 mm) with automatic suction cup positioning. Extremely short set-up times. Workpiece fixation on the back allows machining of the entire circumference including horizontal drilling without additional reclamping (up to workpiece lengths of 1,500 mm). This guara ...
used
including bending jigs
used
Frees blok; freesblok; freesmachine; uitwendige maat 160 mm; hoogte 80 mm; asgat 40 mm
used
Frees blok; freesblok; freesmachine; uitwendige maat 160 mm; hoogte 80 mm; asgat 40 mm; v.v. wisselmessen
used
Length: 2300mm, width: 1730mm, height: 2230mm, weight: 1.2t.
new
technical details: - TERSA planer knife quick-change system as standard - Material feed with separate motor and two speeds - Aluminium dressing stop (1200 x 160 mm) with round rod guide - Table adjustment by hand with numeric display (1/10 mm accuracy) - Helical toothed steel feed roller electrical data: - Power drive motor: 5 kW - Rated voltage: 400 V - Rated current: 9 A - Mains frequency: 50 Hz Dimensions and weights: - Length: approx. 2,000 mm - Width/depth: approx. 1,100 mm - Weight: approx. 430 kg Dressing: - Total length of the tables: 2,000 mm - Task table length: 1,034 mm - Working height: 900 mm - Chip removal max. dressing: 5 mm - Dressing stop length: 1,200 mm - Dressing stop height: 160 mm Connection suction: - Suction nozzle - Ø: 2 x 120 mm Installation information: - Space requirement length: 2,000 mm - Space requirement width/ depth ...
used
Special design, cutting length: 6300mm, max. passage height: 2200mm, max. trimming height: 2100mm, cutting depth: 80mm, power: 5.5 kw, saw blade diameter: 303mm, dimension display: digital, with continuous small parts support, tilt: pneumatic, extraction: 1,200 m³/h, 2 x 100mm, installation dimensions: 7620 x 1500mm, room height: 2990mm.
used
Working width: 530mm, planing height: 3-300mm, four-blade shaft diameter: 125mm, max. rotational speed: 5000/min, max. chip removal: 8mm, feed: 8/16m/min, motor power: 5.5kW, length: 1200mm, width: 1200mm, height: 1400mm, weight: 680kg, with electric table height adjustment, two adjustable rollers in the thicknessing table and handwheel with digital display for fine adjustment.
used
Workpiece thickness: max. 45mm, workpiece length: min. 180mm, workpiece width: min. 60mm, pressure force of a roller: approx. 400N, feed speed: 16m/min max. With documentation, an on-site inspection is possible.
used
Max. Speed: 40-50/min, product size range: 40mm/40mm/16mm to 300mm/225mm/96mm, max. output: 60ppm, film width: min/max: 50mm/435mm, max. film roll diameter: 400mm.
used
Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.
used
Stroke: 1700mm, length: 1870mm, width: 1050mm, height: 3200mm, with documentation, an inspection is possible.
used
Holac slicer, type: SECT 28 CT, serial number: 403-02-43, year of construction: 2013, 400 V, 50 Hz, 18 A, 7 kW, 6 bar, plastic mesh infeed belt, belt width: 280 mm, clearance: 290 mm x 180 mm, total dimensions: 2650 mm x 900 mm x 1600 mm. Missing knife.
new
used
Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm
used
Year: ca, 1988 tool taper: MK 3 weight of the machine ca.: 2,5 t digital: cross-moving table: feed:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The PARAMIX – unit for carbonated drinks. The included process steps are; deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 Pressure-Temperature regulator Typ BMS7, Additional title: mixing unit 1983 - 2010, Capacity approx.: 150 hl/h Mixing and carbonating, Variety / Product: carbonated drinks, Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7, Material: Stainless steel, Position: Frame mounted, Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel), Code: 5243
used
Retrofit kit suitable for e.g. HOLZHER ProMaster, Dynestic, Epicon, incl. Ethernet gateway LAP, LAP connection cable, 25 m, 4 targets, swivelling, with bracket---------- Technical data ---------- Projection colour: green, Supply voltage: 24 V DC On request, installation by our technicians is possible. Quality - Info: - Function tested - Software tested ; TOP! Workshop tested & immediately ready for use
used
Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request
used
One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016
used
HOLTEC HFT 21 packet cutting drip saw automatic feed – year of manufacture 1986 – German production – electric roller feed Technical parameters: - engine power 11 kW - guide length 1700 mm - package width 1300 mm - package height 1300 mm - cutting length max 4500 mm - roll width 1300 mm - spacing between rolls 900 mm - roll diameter 160 mm - height of rollers from the base 730 mm - total length 9400 mm Transport dimensions 650 x 200 x 256 cm weight 2000 kg
used
Pressure filler Holdefleiss / Germany Type Bavaria 16/3 16 filling stations + 3pcs cork Long tube Ca. 5,000 containers / h Container 0,50 NRW + 0,50 swing top glass bottle Year of construction 1975 FILM AVAILABLE - PLEASE REQUEST Further documents and price on request
used
- Exhibition machine -saw blade guide above, saw blade guide below, quick clamping device via eccentric lever---------- Technical data ---------- rolls: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 , motor 400 V: 1.5 kW, suction nozzle : 2 x 100 mm, Cutting speed: 900 / 450 m/min., dimensions (LxWxH): 768 x 512 x 2,048 mm, weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm ; new exhibition machine
used
well-kept HolzHer 1422 K Banding thickness up to 20mm Gluing, capping, flush or radius milling Total length approx. 3450mm
used
Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350
used
Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet
used
Dicer Holac Dimensions: 210x130x200cm Electrical power: 9kW
used
Wood Her Auriga 1308 FÜ + PU compact design - edge thickness 0.4 - 8 mm PLC screen control Edge Control PPC 221 color screen Pre-milling unit for joining in front of the gluing part Edge magazine fully automatic for rolls and strip goods Glue Application Station GLU JET Cartridges + PU Gluing - Multisystem + Glue application using nozzle technology Workpiece height 6-65 mm Auto. Glue height adjustment Printing unit 1912-3 pneumatic Cross-cut unit 1918 pneumatic for rolls and strip goods up to 8 mm edge thickness with pneumatic adjustment from 0-10° inclination of the cross-cut saws Milling unit 1827 MOT 4, flush milling 8 mm, radius milling - bevel milling - 15° 1827 MOT NC axes via control panel Mould milling unit 1832 pneum. Rounding of corners up to edge thickness 3mm in the run Drawing blade unit 1929 for chamfers and radii with 2 drawing blade carriers via control p ...
new
Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal flow rate: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motoric; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating the dust in the cyclone separator and cartridge filter Effective cartridge filter with large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Includes remote control and timer function to switch the suction on and off sight glass for checking the fill level in the container Easy emptying of the mobile filling tank
new
Suction nozzle diameter: 260mm; Nominal flow rate: 7700 m³/h; Bag volume: 2 x 290 l; Filter cleaning: manual; Engine power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release locks for filter and chip bag fine filter bag double-woven
new
Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release fasteners for filter and chip bag fine filter bag double-woven