126,737 used machines on RESALE, but how to find them? Machine Search
wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good
Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request
The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg
The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures
Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right
Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm
Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>
The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tyres with a parking brake on the rear axle and swivel castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with electric starter. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General Specifications: ----- Drive motor: 2 Cylinder 4 Stroke Petrol Engine, Electric Start Power of the drive motor: 16.4 kW Spee ...
various hand spindle presses small More: Foot pendulum press Jantsch
The machines of the CD25 series are compact high-pressure cleaners from 170 to 500 bar and a volume flow of 17 to 42 l/min. The pump is powered by a 3-cylinder, water-cooled Kubota diesel engine. The sturdy frame is made of stainless steel for long durability and corrosion resistance. The powder coating ensures the very beautiful appearance. The machine has very compact dimensions of 1200mm x 800mm. This corresponds to the same size as the well-known EURO pallet. The frame is fixed on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eyelet. This allows for very easy transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD25-170 170 bar 42 Lpm CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 ...
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
Cordmasspress built 1970 diverse thorns All data without information
The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...
The CD100 series of water and water jet machines ranges from 250 to 2050 bar with pump flows from 21 to 167 l/min. The pump is powered by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel to ensure long service life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are equipped with rubber feet under all four corners and the machine has forklift pockets as well as hanging eyelets at all four corners. The machines have galvanized roof panels with side railings for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1 ...
Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6
Te Coop: Danfoss Druk druk transmitter MBS 3000 0-6 bar
Te Coop: Labom Druk transmitter CE 1110 Druk 0-25 bar
The CD160 series of our high-pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel, which ensures long durability and corrosion resistance. For the beautiful look, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and, at all four corners, with lifting eyelets. The machine has a galvanized roof plate with a side bracket for the protection and storage of, for example, high-pressure hoses. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD160-200 200 bar 300 Lpm CD160-250 250 bar 250 Lpm CD160-1000 1000 ...
Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW
Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.
The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of ...
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation
with 32 filling valves, 8head crowner and 8head aluminium screw capper with Siemens S7 control capacity: approx. 8,000 bottles/h in 500 ml bottles
automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t
Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation
GS12 - used approx. 26 m³ / 26,000 litres steel tank, gravel filter, pressure tank, water cistern. The container is used and in good condition. capacity: 26.2 m³ / 26,200 litres material: steel tank, pressure tank 6 bar outer dimensions: approx. Ø 2.90 m x height 5.70 m inner dimensions: approx. Ø 2,80 m x height 3.80 m weight: 6 tons output: 42 m³/h year of production: 2000 comm. nr. 22857/3 other: painted blue, threefold epoxy resin coating inside Aboveground pressure tank made of steel, standing vertically on four feet, with two acces holes DN500, one DN300, former gravel filter. Incl. flanged / welded nozzle floor with screwed-in filter nozzles, inner mud funnel, all required connections for untreated water inlet, treated water outlet, backwash in- and outlet and ventilation. This steel tank can be used as gravel filter for filtration, de-icing and ...
The BTS-240 Bin Compactor is ideal for material compacting in your 240 Ltr. garbage and recycling bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 2 Ton Compaction: up to 80 % (material depending) Machine size: 2360 H x 780 W x 780 D mm Machine weight: 234 kg Transport height: 2360 / 1754 mm (on request) Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces frequency of waste collection A qu ...
Binding press, completely made of stainless steel (frame & all rollers) Bandwidth 1450mm, L x W x H: 4450 x 2100 x 2450mm. Processing capacity with apples approx. 4-6 t/h. Year of construction 1994 Other fruits, berries and vegetables are also possible. No compressed air needed! No complex control necessary! Belt tension by means of 2 pcs. 5t. crank winches and 2 steel springs Very little trub in the juice because no shear effect of 2 bands! Rotary brush & 2 rotary high-pressure nozzles for belt cleaning. This press is an improved replica of an (Amos Compact cover press, see Prospeckt from Amos) in contrast to the Amos press, all rollers in our press are completely made of stainless steel and with continuous shaft (not only shaft stumps) as well as in the interior again amplifier discs to significantly increase the stability of the rollers. The rollers lurk on plain bearings t ...
The BTS-MF300LH is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 300 kg. Due to the compact design and low height of under 2 meters this baler is perfect for rooms with limited ceiling heights. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 20 Ton Bale weight: up to 300 kg (material depending) Bale size: 1100 H (var.) x 1200 W x 800 D mm Machine size: 1986 H x 1800 W x 1100 D mm Machine weight: 1140 kg Transport height: 1986 mm Loading aperture: 1200 W x 600 H mm Cycle times: 45 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) ...
DYNAJET 500me HELI - 400V/50Hz INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth use - Oper ...
DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...
Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication
Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834
DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...
DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! World's first 1000 bar high-pressure cleaner without control cable and with dry-closing Pistol. The new DYNAJET Trolley 1000 me combines the greatest possible ergonomics and maximum strength for concentrated efficiency. This makes DYNAJETten even more environmentally friendly, more efficient and safer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal ...
DYNAJET 800me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/trian ...
DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...
Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
YNAJET 500me - 400V/50Hz Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth u ...
Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober
ynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 350me with up to 350 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...
maximum number of results exceeded
please refine your search
