heidelberg machines used for sale

Key data: 1 mm, 255 mm

used RAS beading and flanging machine, foot switch, without rollers with the following equipment: - 7" touch controls - Learning function - Right-left run - UnLock security feature - Program management Machine is checked by a specialist, cleaned and is then fully functional. Test run is carried out. Sheet thickness max. steel/thickness 1.75 mm Throat depth 255 mm Farbe/Colour grau/gelb Total power requirement/electric power 1.5 kW Weight/Weight 60 kg Dimensionsf/Space requirement 1200 x 800 x 1600 mm Roller center distance 63 mm Voltage 230 V

Offer 26272 Technical data: - Drilling performance in steel ST 60 21.5 mm - Drilling spindle holder MK 2 - Drilling spindle stroke 120 mm - 3 drilling spindle speeds - Projection 260 mm - Max. distance table - drilling spindle 620 mm - Table with 2 T-slots 380 x 320 mm - Height adjustable via rack with hand crank - Drive 400 V - Space requirement approx. W 550 x H 1800 x D 750 mm - Weight approx. 200 kg

Key data: 40 t

Machines from the die-cutting production sector for the processing of coil coil material up to 1mm material thickness for the production of strip goods such as contact plugs for the general electrical and automotive industry. For sale are various high-speed presses from Schaal from 12kN to 40kN. In addition, various material coil unwinders from Huras-Stanzautomation can be purchased. In addition, various automatic winding machines from TF-Wickeltechnik and Huras are for sale. In addition, various pereferie devices can be purchased.

Cylinder/flatbed die-cutter, fully functional, ready for collection immediately Min. format: 160x210 max. format: 500x700

Vietmac PL-84 Wide Belt Sander/Combi Working width 1100mm Working height 3-160mm Number of generators 1 Agregat combi Grinding unit blowing Main motor with a power of 8.8/11kw Feed speed adjustable by variator

Single column vertical turning lathe BERTHIEZ TM500 SP, as follows: Manufacturer: Berthiez: (France) Model: TM500 SP Year of manufacture: 1979 Main technical data: Table diameter: 6300 mm Maximum turning diameter: 15000 mm Maximum usable height: 4000 mm Arm travel: 3600 mm Main motor power 100KW Maximum allowable load on faceplate: 80 t Ram size: 360x360mm Machine weight ab. 250ton The machine can perform turning and milling operations. The machine is equipped with 2 milling attachements. One head is for high speed milling 3000rpm and one is with 1500rpm

Offer a WMW 315/8 milling machine here. One of the best from Auerbach before the turnaround. Is in a good, fully functional condition. An identical machine is available if you are interested. (complete except for pulley and belt) X Y Z 500/400/400 Spindles Sk40 Year of construction 1988 Feeds infinitely variable, rapid traverse both have West German export control cabinets Connected load 8.5kw electr. Tool clamping in both axes Coolant Setup Speed 56-2800rpm Weight 1.9t per piece All circuit diagrams documentation included

Jacob White 200 Two flap sealer Two flap sealer, 400mm pitch, adjustable width from 80mm to 350mm max, with glue wheels, adjustable temperature control, 3Ph

Key data: 2000 mm, 600

Surface Grinding Machine - Horizontal ELB-GRIND Perfect BD 20 SPS Used machine as good as new Machine was completely rebuilt Control cabinet new, motors new, wiring new, control system new Hydraulics new, fairing new, Grinding length: 2000 mm Grinding width: 600 mm Workpiece height: 600 mm Table clamping surface: 2000 x 600 mm Grinding wheel dimensions: 400x100x127 mm Grinding spindle motor: 11 kW Table speed: 2 - 30 m/min Grinding wheel speed: 5 -35m/sn Total power requirement: 25 kW Machine weight approx.: 8 t Approx. space requirement: 5.8 x 2.5 x 2.5 m General overhauled in 2026 with 12 months warranty Paper filter machine Oil cooler Adjustable feet Line-up included Instruction included

2 each of machines immediately free. One set of molds can be purchased with the machines:: 7 cavities 200 ml; 7 cavities of 100 ml; 6 cavities of 375 ml. all molds with hot runner. The machines have only run for about 1,000 operating hours. Already in storage (No original photo of the machines)

Suitable for regrinding and making new wood and metalworking tools of all kinds. Accessories: Pallet loader,, Quinto software, version 4.3b,, Software for cylindrical cutters,, Software for conical cutters,, Software for hemispherical conical cutters,, Software for two-flute cutters,, Software for three-flute cutters,, Software for hob cutters,, Software for up-and-down cutters,, Software for wood drills,, Software for tools with an axial angle,, Software for taps,, Software for step drills,, Software for drills, types H and S,, ISO axial software,, ISO spiral software,, Elbaron electrostatic mist extractor,, Hydraulic workpiece clamping,, Renishaw measuring probe,, Automatic fire-extinguishing system,, Automatic centralized lubrication system,, Glass scales on the linear axes,, 1 loading pallet,, 16 grinding wheel flanges,, 4 collets,, 1 collet chuck,, 1 automatic 5-jaw chuck, PMH., X-a ...

40 bar for PET processing. 750 m3/min. Including refrigeration dryer and external cooling. Motor 132 kW. 400V 50Hz. 2,609 hours of charging, 9,706 hours of operation. Very good condition, immediately available

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 95 mm x-travel: 650 mm distance between columns: 750 mm Control: TNC 426 / 430 total power requirement: 5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,5 x 3 x 3 m No. 5265 CNC coordinate boring machine SIP - Hauser MP 44 Working area: 650 x 450 x 500 + 160 Drive: 5 kW Control: TNC 426 / 430 Table 730 x 630 mm Electronic handwheel documentation Spindle SK 40 Speed range approx. 25 - 4,000 min-1 RETROFIT with TNC 426/430 in 2004 3600 switch-on hours / 900 program hours Space requirement approx. 4.5 x 3 x 3 m Transport dimensions approx. 4 loading meters / height 2.60 m Weight approx. 4.5-5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking Kurzvideo: https://www.youtube.com/watch?v=OHlzAkbGW_U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 533 mm turning length: 660 mm control: Haas total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Haas C-axis driven tools 12-fold revolver hydraulic 3-jaw chuck Tool Eye chip conveyor coolant device without tailstock Technische Daten / technical details: max. Drehlänge / max. turning lenght 660 mm max. Drehdurchmesser / max. turning diameter 533 mm Umlaufdurchmesser über Bett / rotary diameter over bed 806 mm Drehzahl Spindel / spindle speed 3400 UpM /rpm Anzahl Revolverwerkzeugplätze / number of places in revolver 12 fach /fold Eilgang Z, X / rapid feed Z, X 24 m/min Antriebsleistung Spindel / drive capacity spindle 22,4 kW Gewicht der Maschine ca. / weight ca. 4100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machi ...

x-travel: 100 mm y-travel: 200 mm z-travel: 450 mm taper ISO: SK 40 turning speeds: 22 - 1400 U/min total power requirement: 7,5 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar - Machine length ¦ 4305 mm - Constant feed rate 8 m/min - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 40 mm - Edge height max. = workpiece height ¦ + 5 mm - Edge material roll ¦ 0.3 - 3 mm - Edge cross-section max. - For PVC ¦ 135 mm² - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - Strip edge material ¦ 0.4-3.0 mm - Edge cross-section max. - For strips ¦ 135 mm² Equipment: - Inlet ruler manually adjustable - Workpiece support ball sleeve - Manual chain conveyor central lubrication - Top roller pressure with toothed rubber rollers - Height adjustment manually - Joining milling unit 2x0.7 kW (40 mm milling cu ...

Filling machine Vemag Robby 134, Vacuum filling machine with twisting gear and casing holding device, Accessories, Instruction Manual Connection 400V, 7.5kW, year of construction 2001, Dimensions LxWxH approx. 86x65x165cm, weight approx. 495kg, very good used condition, fully functional

Year of manufacture : 1997 Control Heidenhain TNC 426 X-axis travel: 4500 mm Z-axis : 1200 mm Y-axis: 1600 mm

Infeed belt / conveyor belt for Sollas cellophane wrapping machines Length approx. 2,500 mm For manual feeding of boxes, CDs, DVDs, ... Self-drive Age approx. 20 years (year of construction not known) Good, runnable condition, in production until recently, now has to go for renovation and can be viewed in Cologne at short notice.

TECHNICAL DATA Materials: • PE • PP • Extra Cut • Thermo • Clear and Clear • PET • Suitable for blank materials • Suitable for pre-printed materials with register marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Centre dancer • Webbing-up mode for web threading • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min

2 used injection molding machines are for sale. Enclosed are the desired photos of our used 280t and 650t Demag machines, Robot, conveyor belt and enclosure. The machines are still involved in series production and can be viewed during operation. The costs and organization for dismantling, transport from the hall to the truck, loading and transport to your location are borne by the buyer. The used 650t machine, robot, conveyor belt and enclosure The used 280t machine, robot, conveyor belt and enclosure

Manufacturer: TOS Model No.: WHQ 13 Year: 2004 Condition: Used Stock number: 9602 Work table length: 2200 mm Work table width: 1800 mm X-axis travel: 3500 mm Y-axis travel: 2500 mm Travel travel Z-axis: 1250 mm Spindle diameter: 130 mm Machine weight: 37000 kg

Auction-ID: A1-50718-10

VERTICAL AXIS GRINDING MACHINE Inv. No. 12.903I1 Make DELTA Model LB300 Distance column/wheel axis 300 mm Distance table level/wheel 280 mm Max. grindable surface 140 x 330 mm Rapid feed per turn handwheel 2 mm Size of the cup-wheel 178 x 78 x 78 mm Dimensions abrasive segments 50 x 16 x 90 mm RPM of the wheel 2840 rpm Motor power 2.2 KW Auction-ID: A1-50718-33

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Sehr gut erhaltene Kel-Vista Steuerung FANUC 21i Maschine erhält Wartung und Geometrie nach Kellenberger Messprotokoll. -B-Achse automatisch 2,5° -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben -Reitstock mit Mikroverstellung -pneumatische Entlastung Obertisch -Sinuslineal -Aktive Längspositionierung Kel-Pos -GAP Anschnitt Sensor -Messsteuerung Movomatic -Papierbandfilter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scm Sandya 5 sanding machine mod. 5 RR 110 used useful working width mm. 1100 I° calibrating roller belt in ground ribbed steel II° sanding roller belt rubber hardness 45 Sh Automatic positioner with vernier single motor X the two belts kw 11 Automatic belt centering nr. 2 belt feed speed Digital viewer Job quota CE

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minIntegrated swivel rotary table simultaneousIntegated swivel rotary table DMP 35 version 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 6-channels Inclusive So Tool magazine 25 placesTool magazine 25 places (suitable for inclusion in the tool spindle) Max. tool length 150 mm Chip-to-chip time 1.6 sec Note: machine width increases to 1410 mm! Spindle speed 24,000 rpmSpindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 830 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a training workshop. Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing Manual The data for this ad was created with ModulMWS - the software solution o ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 600 x 210 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 950 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Infinitely variable feeds and rapid traverse in all 3 axes Fixed angle table Coolant equipment Tailstock with counter bearing Several toolholders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5100 mm y-travel: 3500 mm z-travel: 1100 mm distance between columns: 2700 mm distance table - lower edge spindle: 200 - 1300 mm table-size: 5000 x 2600 mm table load: 17 t spindle motor: 37 /45 kW spindle turning speed range: 6000 U/min tool taper: BT 50 feed in x - axis: 12 mm/min feed in y - axis: 20 mm/min feed range Z-direction: 15 mm/min w-axis: mm control: Fanuc 0i-MF total power requirement: - kVA weight of the machine ca.: - t dimensions of the machine ca.: 13 x 8 x 5,5 m Portal milling machine equipped with: - CNC Control FANUC 0i-MF (10.4 LCD) - ATC 60-fold (BT 50) - X/Y axis roller linear guide way, Z axis box way - Auto head storage: -- 90 degree angle milling head - Coolant thru spindle 50bar - X/Y/Z axis linear scales - Spindle oil cooler - Oil skimmer - Air conditioner - Chip conveyor - Ball Screw Cooling X/Y/Z - Air Blast through Spindle The data for this ad  ...

Offer 26224 Technical data: - Table size approx. 2000 x 400 mm - Working range of the axes - X 1500 mm - Y 650 mm - Z (vertical) 650 mm - Tool holder ISO 50 - 12 working spindle speeds horiz. + vertical 42 - 1290 rpm - Projection vertical head 450 mm - Projection horizontal head 602 mm - Longitudinal + transverse + vertical feed range 20 - 2000 mm/min - Rapid traverses longitudinal + transverse / vertical 3600 / 1500 mm/min - Min. / max. distance milling spindle - table surface 0 - 600 mm - Digital display - Coolant device - Drive 400 V 10 kW - Space requirement approx. W 3000 x H 2400 x D 2400 mm - Weight approx. 4600 kg

Manufacturer SORALUCE Model SP-8.000 Year of Manufacture 2008 CNC HEIDENHAIN iTNC 530 Table Table surface 10,000 x 1,100 mm Max. permissible weight on table 2,500 kg/m2 Tours Longitudinal (X-axis) 6,500 mm Transverse (Y-axis) 1,500 mm Vertical (Z-axis) 2,000 mm Fast Forward Axles 25,000 mm/min Head Automatic head 2. 5º / 2. 5º INCLUDED ISO 50 Head Cone DIN 69871 Head speed 20 – 4,000 r.p.m. No. of ranges 2 Main Motor Power 30 kW Automatic tool loader. Tool Loader Positions 60 Maximum diameter hta with adjacent positions occupied 125 mm. Maximum diameter with adjacent free positions 250 mm. Maximum tool length 400 mm. Maximum tool weight 20 kg Additional equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Heidenhain HR-410 Electronic Steering Wheel Additional tank with paper filter INCLUDED User platform INCLUDED SIEMENS DIGITAL mo ...

Key data: 3100 mm, 1 mm

used Schechtl folding machine, with factory-repaired control, CNC control (without graphics) with motor stop, foot switch, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3100 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Back gauge (max.): 8 - 1000 mm Colour: grey/blue Total power requirement: 16 A Dimensions: 4207 x 1842 x 1745 mm Machine weight: 3100 kg Upper beam stroke: 140 mm Opening width: 140 mm Bending angle (max.: 160 degrees Underbeam adjustment yes Machine number: MA 6041

Grinder ACRA AEG-1240H, distance between center 1000mm

Key data: 220 mm, 6

SINUMERIK 828D CNC system

Caution - The surcharge requires the approval - Margin taxation = Your bid is subject to 18% brokerage fee and 19% VAT on the brokerage fee

Caution - The surcharge requires the approval - Margin taxation = Your bid is subject to 18% brokerage fee and 19% VAT on the brokerage fee

Sale against the highest bid in the context of an auction ! The prices are starting prices !

4x Automatic Print & Apply Labeling Systems Bluhm Weber Group LEGI-AIR 4050E / 4050E NC(V2) – incl. Zebra ZE500 printer and documentation For sale are four high-quality, automatic label printing and dispensing systems (Print & Apply) of the Bluhm Weber Group (Weber Marking Systems), model series LEGI-AIR 4050E. The robust, modular systems are designed for continuous industrial operation in logistics and production. All devices have integrated Zebra ZE500 thermal transfer/direct thermal printers as well as complete documentation. Condition: fully functional, just dusty. Overview of the systems: 2x LEGI-AIR 4050E NC(V2) – Top Apply Automatic Labeler Top Zebra Printer ZE500 Pneumatic, height-adjustable 900–2200 mm Label format: 150 × 110 mm Type designation among others: 30 – RH – ZE543 – LK400 Connection: 100–240 V AC / 50–60 Hz / 700 W / 6 bar ...

Cleaning system for parts Manufacturer: Render Type: W 92 AM HD WT Year of Make: 2013 Data washing chamber: Basket diameter: 900 mm Usable internal height: 520 mm Load capacity: 200 kg Pump performance Capacity per litre: 240 Itr./min. Pressure: 3 bar Wash tank capacity: 130 Itr. Heating capacity Wash tank: 8 kW Drying: 4 kW Washing: 65 C Drying: 130 °C Safety temperature limiter: yes External dimensions WxDxH (lid open) / Weight Cleaning system: 1,500 x 1,420 x 1,780 (2,300) mm / 390 kg Trolley: 950 x 1,100 x 1,220 mm / 80 kg

2x ETT Packaging Technology Tray Erector – TF 30 L (2014) + TF2 (2020) – incl. complete documentation For sale are two used, high-quality tray erectors from the renowned German manufacturer ETT Verpackungstechnik (Made in Germany). Both machines come from a company liquidation, have been dismantled and properly dismantled. They are in good, functional condition (only dusty) and have the complete documentation (layout, CE declaration of conformity, parts lists, electrical plans, operating instructions and much more). All format tools are available. Machine 1: Tray erector TF 30 L • Engine No.: 32-00-0114 • Year of construction: 2014 • Weight: 2,600 kg • Power: 15 kVA • Connection: 3x400 V/N/PE 50 Hz • Air consumption: 30 NL/min. at 6 bar • Dimensions (L x W x H): 3,677 x 1,603 x 2,408 mm Workable formats (Fefco 0453, hot melt): 1. 292 × 187  ...

used bread slicer Treif Diskus SB, overhauled, knife sharpened, weight 225 kg, year of construction 2015, machine no. 609102.190467.124622, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 HP

Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-50798-343

Used column drilling machine (pillar drill press) for workshop use. • Floor-standing column drill used for drilling holes in metal and wooden workpieces. • Brand and model are not recorded; please contact us for details. • Condition: has not been in operation for several years; inspection and testing are required before use. • For technical details such as drilling capacity, speeds, table size and supply voltage, please contact us. Auction-ID: A7-50988-137

approx. 11 pieces of compact label dispenser for the application of pre-printed labels, Weber, Alpha Compact – used - : Price per piece from location: now only 950.-€ instead of 2.950.-€ (net)! Manufacturer: Weber Type: Alpha Compact Year of Make: 2014 Incl. column and applicator 100 – 240VAC, Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony