heidelberg 52 v used for sale

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

A2 table (650 x 650 mm)

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1345/600/H90 mm -Weight: 81 kg

We have a HURCO CNC milling machine from 2008 to offer: HURCO VMX 64T Travel: X1625 Y860 Z760 Speed max. 8000 rpm (limited by the new bearings after spindle replacement) Sporadic clamping of the interchangeable arm

Filling, weighing and packaging line: Composed of: "Ishida" multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Output: up to 2 x 40 weighings/min Filling weight (max. weight): 1,500 g Accuracy: Average 0 to +1.0 g Weighing circumference: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Toch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA In good condition + Vertical Flowpack Machine "Rovema" Type VPK260 - 14110 YOC 2001 Power (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-roll) Bag width (min. – max.) (mm): 60-260 Bag length (min. – max.) (mm): 120-600 Filling volume (max.) (cm³): 6000 Sealing Pressure (Max) (N): 5000 (Optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2,200 x 1,430 x 1,620 mm Weight: 920 kg Mains ...

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg

Stanzmaschine für Mappen - Puching machine for wallets GBC Velo Bind Year 2002 - Serial.No. GE04190 Stanzkapazität 45 Blatt pro Vorgang / Punch Capacity Up to 45 sheets of 20 lb. Bond per lift Maschinenabmessung 27,3 cm H x 49,5 cm T x 49,5 cm B / Dimensions 27.3 cm H x 49.5 cm Dx 49.5 cm W 10 Gewicht 40 kg / Weight 40 kg. (88 Lbs.) Anschlusswerte 230 V, 50Hz, 3,5A / Electrical 115 V,50 Hz,3.5 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

; Accessories: Options:, , - DPX-28051 = Socket box: 2x 32A - 2x 16A 3P, - DPX-28052 = Socket box: 63A - 32A - 2X 16A 3P, - DPX-28053 = Socket box: 2x 32A - 2x Schucko 230V, - DPX-28054 = Socket box: 63A - 32A - 16A 5P - 2x 16A 3P, - DPX-28055 = Socket box: 125A- 63A -

; Gross weight [kg]: 5820; Engine: Volvo TWD1645GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 897

; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600

; Gross weight [kg]: 5300; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 985

Glass Slices Cutting Table Used HEGLA VSG A 37 Year: 1997 Total dimensions: approx. 11.5 x 4.4 x 2.5 m Hydraulically tiltable loading table with air cushion and conveyor belt The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

; Power [PS]: 897; Gross weight [kg]: 6424; Engine: TWD1744GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 940

; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110

; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140

Key data: 1550 KW, 1937 kVA

We currently offer: MTU generator set Engine MTU V12 4000 Generator Marelli Type: MJR 4582G220Z3 Power 1937 KVA / 1550 KW Hz 60 Volt 690 A 1623 1800 RPM Year of construction: 2011 Operating hours are low You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576

; Gross weight [kg]: 3668; Engine: Volvo TAD1341GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

Key data: 846 KW, 950 kVA, 400 V

Currently we offer a: Power Generator MWM / Deutz Type: TBD 616 V16 Power 846 KW / 950 KVA Generator AVK Type: DSG62L2-4 400 volts RPM 1500 IP 23 Built in 1999 Hours: 6225 Without control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

; Power [PS]: 489; Gross weight [kg]: 4000; Engine: Volvo TAD1344GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

; Gross weight [kg]: 4100; Engine: Volvo TAD1345GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515

working length: mm Working width: mm Working height: mm Schmalz VacuMaster Multi vacuum device 00 / 150-90 ° -1 Pos. 1 - Article 12.01.02.10520 ------------------------------------------ with chain and Slewing Crane For handling porous large-sized workpieces. VM-MULTI-400/150 H / 90-1EG1000x675 Load 400/150 kg Design: horizontal pivot 90 ° Height: 540 mm Control Arm Length: 1025 mm Eye diameter: 5 mm Sauggreiferanzahl: 1 Suction width: 675 mm Suction length: 1000 mm Motor power: 1.5 KW Voltage (50 Hz): 230 / 400V AC3 Voltage (60 Hz): 230/460 V-Drehstom Colour: RAL 7035 light gray Vacuum Lifting Device VacuMaster Multi -------------------------------------------------- - Type VcuMaster Multi 400 / 150-90 ° -1 for the transport of plates with a porous but also with a dense surface such as raw and laminated chipboard raw and laminated MDF / OSB board, Plastic, plasterboard .. consistin ...

; Power [PS]: 598; Gross weight [kg]: 4860; Engine: Volvo TAD1346GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 900

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Gross weight [kg]: 2550; Engine: Volvo TAD840GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 400

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Setting the thickness of the slice from 0 to 2.5 mm Hand wheel to blade ratio 1:3

; Gross weight [kg]: 2800; Engine: Volvo TAD841GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 400

; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280

; Gross weight [kg]: 5259; Engine: Volvo TWD1644GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Inclucing: battery charger and coolant heater; Water Tank Volume [l]: 897

Sandpaper, abrasive paper, sanding cloth, sanding discs, abrasive bodies -Manufacturer: Carborundum-Dilumite, grinding wheel -Type: BA5A60-JOT15-V20P5T3 -Outer diameter: 400 mm -Width: 50 mm -Inner diameter: 127 mm -Quantity: 1 piece available -Weight: 9.1 kg

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Mash diver / full diver RIEGER with overflushing device and sieve cylinder with cooling jacket and control system Features Volume 5300 L Material No. V2A Total height 6600 mm Foot height 2100 mm Cylinder length 1900 mm Outer diameter 1900 mm Description Topsoil: Clapper bottom with manhole round approx. 400 mm Cylinder: Tasting tap Threaded Socket DN65 Threaded Socket DN80 Threaded socket central DN80 Control in the control cabinet on the side Large outlet with slide Underbody: 4 spherical feet, height-adjustable with washers Tray with threaded nozzle DN80 As standard, the container has: Double jacket surface for cooling or warming The possibility of fully automatic temperature control Automatic control of the mash fermentation process

Vorsatzklebemaschine - End Sheet Tipping machine Hunkeler VEA 400 Year 1988 - Serial-No. 50531/10 Size min. 100x70mm - max. 420x310mm Speed 1200-6800 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test