heidelberg 52 v used for sale

Countersink, countersink, deburring countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° Manufacturer: Bilz -Sale: only complete set -Weight: 5 kg

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Plastic sheets, plastic laminate -various sizes -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread jaws: 1- 2 inch -Weight: 12 kg

cutting capacity - round: 300 mm dimensions of saw-band: 3320 x 27 x 0,9 mm cutting capacity - flat: 330 x 260 mm cutting capacity - square: 260 mm Control: evolution work height max.: 870 mm : 40 / 80 mt/min weight of the machine ca.: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PTO shaft, drive shaft -Discount: You get a 20% discount on this item -Manufacturers: Walterscheid, Jon Deere, Granit -Spare parts: PTO shaft mounts, cross fitting, protective tubes -Partly new, partly used -Sale: only complete set -Price: complete -Weight including packaging: 425 kg

Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !

2 generators Cummins Engine Type VTA 28G5 Year 1997 139 hours of operation Price for unite unit price

1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

1 ARIOLI continuous washing machine type V21, year 2001, roller width 200 cm, working width 180 cm, 5 washing boxes, inside fabric capacity 30 m each box = 150 m

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Wet spent grain silo, Fabr. VetterTec, for 10 m³ net capacity, made of mild steel St 37-2, outlet hopper inclination 60°, with Discharge screw 3.0 m long, with control cabinet and remote counting device, standing on supporting structure, with Vertical ladder, Ø: 2,500 mm, cyl. Height approx. 2,000 mm

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1370 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 55 -Dimensions: 210/130/H180 mm -Weight: 6.8 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1370 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 55 -Weight: 7 kg

geared motor, electric motor -Speed: 5000 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 9 mm -Protection class: IP 21 -Weight: 3 kg

X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 55 -Weight: 7 kg

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Pallets Carousel for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514 Manufacturer: Vollert, Nuspl, Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA Year of construction: 2020, 2019, 2017, 2003, 1991 Control system : Siemens S7, Unitechnik Products: Twin Walls (max. height 3.0m), Filigree Floor Slabs. PALLET CIRCULATION Pallets: 10.60m x 3.08m, 48 pieces STRIPPING AND LIFTING Hydraulic tilting station (EBAWE company, renewed in 2017) Lifting device for shell 1 + floor element (Weckenmann) CLEANING, PLOTTING, ROBOT-SHUTTERING AND OILING Automatic pallet cleaner, plotter, shuttering robot (Weckenmann, renewed in 2020 and 2003) CONCRETE DISTRIBUTION, VIBRATION Automatic concrete spreader 3m³, 9 ejection augers + 9 flaps, (Weckenmann/SAA company 2003, control replaced 2019), electric vibrating station (Vollert) CURING CHAMBER + AUTOMATIC PALLE ...

Brand New / Unused, With Auto Feeder

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stack height: max. 1.20 m Equipment: Standard, vibration and blow function

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 9.5 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Hollow shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 14 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 2820 rpm -Shaft: Ø 15 mm -Design: B5 -Protection class: IP 55 -Weight: 5 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1360 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 180/140/H170 mm -Weight: 5.6 kg

End mill, shank mill, milling cutter -Six-cutter -Roughing end mill -Various: Diameter -Type: HSS -Quantity: 11 pieces -Sale: only complete set -Weight: 6 kg

Tap for blind hole drilling -various: diameters -Type: HSS -Quantity: 7 pieces -Drill bits: M38 x 1.5/M35 x 1.5 2 pieces/M32 x 1.5/M30 x 1.5 3 pieces -Sale: only complete set -Weight: 4 kg

1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps -2 pieces: 18x125 mm -2 pieces: 18x160 mm -Price: complete -Package -Weight: 4.5 kg

Dissolver Vollrath EWFX 60 Power 44 kW Speed range 200-1200 1/min Double-toothed pulley with wall scraper as good as new control cabinet with FU Very good condition, straight from production

Tap for blind hole drilling -Type: HSS -Quantity: 2 pieces -Drill bit: M20x1.5 Left -Sale: only complete set -Weight: 0.2 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

Geared motor, electric motor, three-phase motor, right-angle geared motor -Speed: 100 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 48 mm -Protection class: IP 54 -Weight per piece: 44 kg

electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: 15x collet chucks of various diameters and hexagonal shapes -Outer diameter of recess: Ø 75 mm -Cone: approx. Ø 90/70 mm -Cone length: 40 mm -Weight: 22 kg

VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: approx. 40 collets -various sizes -Cone: approx. Ø 22/28 mm -Cone length: 13 mm -Shaft: Ø 20 mm -Sale: only complete set -Weight: 4 kg

For lawn tractors, ride-on mowers, lawn mowers, lawn tractors, mower decks, lawn mowers, cutter bars, disc mowers -Lawnmower blades: 48 pieces Types: different -Package: complete -Price: complete -Weight: 120 kg

Saw blade 12 pieces -Various sizes -From: Ø 125 mm to: Ø 180 mm -Package: complete -Weight: 7 kg

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Pressure sensor -Type: 3405BM2X2X2920 -Measuring range: 0-250 bar G -Max. Pressure: 1034 bar G -Input: 10-30 VDC -Output: 4-20 mA -Number: 2x available -Price: per piece -Weight: 0.5 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: 11 collets -Various sizes -Hole: Ø 5-28 mm -Length: 64 mm -Shaft: Ø 32 mm -Recess: Ø 38 mm -Sale: only as a package -Weight 2 kg

Machine Type: Kieserling Six-Roll Pipe Straightening Machine Working range Ø 5 to Ø 45 mm Flow Direction: Right to Left Speed 37 / 50 / 75 meters/min Make Kieserling, type VRM 35 Year of construction Refurbished in 2023 Location: Solingen Weight approx. 2,000 kg with substructure and drives Country of origin: Germany Delivery terms ex works

Machine type: Kieserling VRM 20 Flow Direction: Right to Left Target speed with 3-speed manual transmission, m/min 37.5 / 50 / 75 Main operation 1.5KW Make Kieserling, type VRM 20 Location: Solingen NRW Length 2,200 mm Width 500 mm Height 1,700 mm Weight approx. 600Kg Country of origin: Germany Delivery condition Ex-works Solingen, free loaded truck

Machine Type: Kieserling Six Roll Straightening Machine Working range from Ø 18 mm to Ø 100 mm Flow direction: from left to right Speed 37.5 / 50 / 75 m/min. Make Kieserling, type VRM 75 Location Solingen Length 1,970 mm Width 980 mm Height 1,900 mm Weight approx. 3,900 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is completely overhauled by our specialist company.