heidelberg 52 v used for sale

Key data: 380 mm, 280 mm, 130 mm

Vest bezel range 200-380mm incl pins with rollers

Crank winch, Dunkraft, Karohebebock, steel winch -Manufacturer: VEB, steel winch with ratchet safety crank type 10.10 -Load capacity: 10 t -Lifting height: 330 mm -Dimensions: 300/210/H685 mm -Weight: 35 kg

Gearbox, spur gear, angle gear, worm gear -Manufacturer:Varvel, worm gear -Translation: i= 28 -Hollow shafts: Ø 24 x 100 mm / Ø 34 x 100 mm -Dimensions: 150/140/H170mm -Weight: 4 kg

Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: SEW Vector, spur gear motor -Speed: 27 rpm -Engine: Type DFV 132M-4 -Power: 7.5 kW -Shaft: Ø 50 x 100 mm -Protection class: IP54 -Dimensions: 800/300/H39 5mm -Weight: 113 kg

Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor -Type: ZG2 BMREB 90L4-8 AF -Speed: 100/50 rpm -Power: 1/0.6 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimensions: 585/200/H250 mm -Weight: 40 kg

fan, ventilator, blower, duct fan, tube fan -Manufacturer: VEM, fan type 2N611 -Voltage: 220 V / 30 W -Fan wheel: Ø 90 x 45 mm -Dimensions: Ø 205 x 110 mm -Weight: 1.1 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: VEB, side channel vacuum pump side channel compressor -Type: GR2HVX-40/290-P -Drive: VEM 1.5 kW 2840 rpm -technical data: see photo type plate -Dimensions: 400/330/H430mm -Weight: 32 kg/piece

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 160 1/4 -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP44 -Design: B3 -Dimensions: 520/410/H320mm -Weight: 95 kg

tires, solid rubber tires, forklift tires -Manufacturer: Vorwerk Rota, solid rubber tires 3 pieces -Tire size: 18x7-8 rim 4.33 R-8 532/272-1 -Bolt circle: Ø 148 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 22 kg/piece

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Telecentric lighting, LED lighting -Manufacturer: Vision Control, Telecentric Lighting -Type: TZB60-B -Light field diameter: 60 mm -Dimensions: 140/70/H115 mm -Weight: 0.8 kg

loudspeaker -Manufacturer: GSP, loudspeaker, manufactured for Stadler -Art.No.: V100894 LI6-R/ÜLK -Stadler:Ident No. 2354258 -Dimensions: 140/125/H70 mm -Weight: 0.6 kg

Garvens TopLine VS2 inline checkweigher with reject and printer, weight range up to 300 g, calibration value e=0,1 g, accuracy +/-0,1 g, belt width approx. 120 mm, length of infeed & outfeed belt approx. 250 mm, length of weigh cell approx. 200 mm, running from left to right, capacity up to 400 weighings per minute, electrics 230V/50/60Hz, machine floor space approx. 900 x 900 mm (WxD), machine height approx. 1400 mm, machine net weight approx. 85 kg

Recessed light -Manufacturer: SBF, recessed light -Type: SLK63 8602162 -Voltage: 16.8-143 VDC -Connection: see photos -Quantity: 1 light fixture available -Dimensions: 105/100/H45 mm -Weight: 0.2 kg

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

Gema, Wagner COMPATIBLE 100kV COST-EFFECTIVE AND VERY LONG LIFE POWDER GUN CASCADES MADE IN TURKEY

Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg

standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Boge, compressor control from screw compressor type VLED 30R-11A -Individual components: see photos -Dimensions: 200/110/H150 mm -Weight: 1.2 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Holder: Ø75 x 90 mm taper clamping bush 90 x 90 NE (Ø can be changed) -Dimensions: Ø320 x 100 mm -Weight: 32 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank from vertical lathe Scherer VDZ 80 DS -Motor: ATB 0.5 kW / 2820 rpm -Individual components: see photos -Dimensions: 360/190/H540 mm -Weight: 14 kg

Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 -Dimensions: 950/215/H400 mm -Weight: 40 kg

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 225 M2 -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 x 110 mm -Protection class: IP54 -Design: B3 -Dimensions: 770/420/H510 mm -Weight: 286 kg.

Brand: GME Bavelloni Type: Glassdrill + table Model: VT1250 Chassis number: 10.02.007 Construction year: 1995 Length mm: 2200 Width mm: 1000 Height mm: 1900 Transport size L x W x H: 2,5 x 2,2 x 1,9 Condition machine : Overhauled Photos/film available: Photos available Remaining: Equipped with laser Remaining: Stretch works on air Remaining: Double-sided drill, bottom and top

Car wash VAIOCS 1G Max. tool dimensions ... 530x320x200mm Max. workpiece weight ... 70kg Machine weight... 3000kg L x W x H ... 2800x1750x2400mm Cleaning process - solvent immersion degreasing alternatively with ultrasound -Immerse - Intermediate drying - Steam degreasing - Vacuum drying Electrical power: Heating capacity 33 kW Motor power 13 kW Cooling capacity approx. 15 kW Power consumption approx. 51 kW / 90 A Operating voltage 400 V / 50 Hz / 3/N/PE Compressed air approx. 6 bar

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KD 71.2/4 -Power: 0.4 kW -Speed: 1375 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 44 -Number: 2x motor available -Price: per piece -Dimensions: 230/137/H195 mm -Weight: 6.6 kg/St.

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KR 80.1/4 -Power: 0.6 kW -Speed: 1375 rpm -Shaft: Ø 16 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 265/155/H200 mm -Weight: 11.5 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workstation crane, crane foundation plate -Pillar jib crane: intermediate plate/base plate, outside: Ø 1050 mm -Thickness: 40 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Own weight: 576 kg

Cooling water pump, radiator, water pump, engine cooling -Manufacturer: SKF, water pump -Type: AquaMax VKPC 81602 -Dimensions: see photos -Carton dimensions: 190/125/H120 mm -Weight: 1.3 kg

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Edge banding, edge trimming. Veneer roll -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg

Crane block, crane hook, load hook, single hook, lower block -Manufacturer: Verlinde, Crane hook: Crane hook type FEM 3 m -Load capacity: 3.2 t -Dimensions: 600/280/135 mm -Weight: 30 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: SK30 3 pieces -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 150/65/H145 mm -Total weight: 1.8 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Venjakab, belt conveyor on solid base frame, without drive -Webbing: Type H 6.5 m -Belt width: 1985 mm -Conveyor length: 3 m -Transport dimensions: 3060/2430/H940 mm -Weight: 740 kg

Bezel, steady rest, lynette -Bezel: max. opening Ø 170 mm -Centre height: 325 mm -Support: ball bearing -technical drawing: in the photos -Dimensions: 520/260/H590 mm -Weight: 77 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: Continental, tires ContiRV20 Velocity with rim -Tire size: 7.00 R 12 -Bolt circle: Ø 170 x 18 mm -Recess: Ø 138 mm -Dimensions: Ø 660 x 185 mm -Weight: 41 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KPR 63 G 6 -Power: 0.25 kW -Speed: 900 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 54 -Dimensions: 210/122/H1700 mm -Weight: 7.8 kg

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Nucleus, control module -Type: DX1 ECO MC-DST-V15 rev.2 -Item No.: FE12003 -Number: 10 modules available -Price: per piece -Dimensions: 90/70/H115 mm -Weight: 0.3 kg/pc.

Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

Ground cable for MIG/MAG welding machine, electrode welding machine, welding cable extension, MMA welding cable -Welding cable: Ground cable for MIG/MAG welding machine, electrode welding machine -Version: Dinse plug -Length: 10 meters -Weight: 5.7 kg