128,396 used machines on RESALE, but how to find them? Machine Search
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...
Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill, assistance mill VESPA 16/22/4 kWt for small parts Model VESPA 16/22 / 4 kWt VGA Throughput Kg/h: 40-60 Rotor diameter мм: 160 Rotor knife quantity/dimensions piece x mm: 6×110 Stator Knife Quantity/Dimensions Piece x mm: 4×110 Motor kW: 4 Weight Kg: 320
Side channel compressor, two-stage The VASF 2.50/2-0.AC230 is a turbo machine with VARIAIR frequency converter that offers high performance with 100% oil-free and contact-free operation. These side channel blowers are low maintenance, highly efficient and require minimal maintenance. Features VARIAIR Frequency Inverters Non-contact compression Compact design Intake and exhaust mufflers Sealed bearings eliminate the need for lubrication Vibration dampers for horizontal installation Additional cooler Pros Exact volume flow through speed control Low operating and exhaust gas temperatures Quiet operation Specifications VASF 2.50/2-0.AC230 Volume flow: 24 m³/h Pressure relative: +560 mbar Inverter power: 0.65 kW Hz: 50... 300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor & inverter More items - new and used - can be found in our shop! International sh ...
Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Model: VESPA 25/40/7.5 VGA Throughput Kg/h: 100-140 Rotor diameter мм: 250 Rotor knife quantity/dimensions piece x mm: 6×200 Stator Knife Quantity/Dimensions Piece x mm: 4×200 Engine kW: 7.5 Weight Kg: 560 Dimensions (mm) A 1115 B 770 C 1800 D 1490 E 410 F 310
50/120/75 VGA Cutting mill VESPA for plastics 75 KW, 700-1100 kg/h. Insertion opening mm: 1220×650 Rotor diameter mm: 500 Throughput kg/h: 700-1100 Rotor blade quantity/mm: 6 x 600 Stator knife number/mm: 4 x 600 Motor KW: 75,0 Dimensions LxWxH mm: 2400x2100x 3070 Weight kg: 6800 options: With material conveying blower 11.0 kW and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.
35/40/11 VGA Cutting mill for plastics 35/40 VGA, 11 KW, 120-200kg/h. Insertion opening mm: 420×380 Rotor diameter mm: 350 Throughput kg/h: 120-200 Rotor blade quantity/mm: 6 x 200 Stator knife number/mm: 4 x 200 Motor KW: 11,0 Dimensions mm: 1180x780x1970 Weight kg: 950 options: With material blower 4.0 kW Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.
50/100/55 VGA granulator for plastics 55 KW, 700-900 kg/h. Insertion opening mm: 1020×650 Rotor diameter mm: 500 Throughput kg/h: 700-900 Rotor blade quantity/mm: 6 x 400 Strator knife quantity/mm: 4 x 400 Motor KW: 55,0 Dimensions LxWxH mm: 2400x1700x 3070 Weight kg: 4650 With material conveying blower 7.5 kW and BigBag filling station. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Canon Image Press V1000 Year:2022 Print Speed (BW/CL):100 ppm Recommended monthly volume: 75,000-600,000 pages Maximum monthly peak volume: Up to 1.2 million pages Registration tolerance: Front to back: 0,70 mm Printing method: Colour Laser Beam Printing Print Resolution (dpi): 2,400 x 2,400 Machine type: A3 Digital colour Press cut-sheet Core functions Reading: 600 dpi x 600 dpi Printing: Up to 1,200 dpi x 1,200 dpi Processor: 1.8GHz, 1.3GHz Dual Control Panel: 10.1 inch Memory: 6GB Hard Disk drive SSD 240GB Mirroring Hard Disk Drive: Yes Interface Connection: NETWORK Standard: 1000Base-T/100Base-TX/10Base-T Power supply: 220-240V/16Ax2(Main Station), 220-240V/16A(Fusing Station) Dimensions main engine (W x D x H): 1,583 x 872 x 1,040 mm Weight: Approx. 410 kg Copy Speed (BW/CL): 100 ppm First-Copy-Out Time (A4) (BW/CL) Weight ...
VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg
EvoPac VOLTA WINDOWS window and door wrapping machine was built in 2020 in Italy by EvoPac S.r.l. The machine is used for wrapping windows and doors of various dimensions with stretch film. Such protection minimises the risk of damage to the load during transport, as well as protects it from weather conditions. High performance, combined with state-of-the-art technical solutions, makes it a great solution for companies specialising in the manufacture and transport of windows and doors. The process begins with the loading of the product onto a turntable with an integrated roller conveyor. The pneumatic grippers, controlled by a foot switch, automatically adjust to the size of the product, thus ensuring high process stability. The stretch film is unwound simultaneously with the rotation of the work table and the load placed on it. At the end of the cycle, the EvoPac VOLTA WINDOWS automa ...
Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg
Slicer line with insert Suitable for slicing cooked ham in bread loaf and tunnel large form as well as 105 cal. Boiled sausage Knife: Multivac/VC, reserve, sickle, 23°/5°, z-toothed Line consisting of: - Slicer, manufacturer VC999, type SL600 Scale, 4-lane walk-through checkweigher with 4-lane rocker, manufacturer VC999, type CW404 scale, 4-lane walk-through checkweigher with 4-lane rocker Automatic inserter, 4-lane, for film widths from 420 - 620 mm, manufacturer VC999, type SB620 Description: SLICER SL600 Automatic central loading: - Ergonomic working heights allow easy manual product loading and line connection - 800 - 1000 mm loading height Servo anqetriebene production guide above and below: - Servo-driven product guide belts at the top and bottom ensure precise, even, pressure-free and gentle feeding of the products during cutting - Servo dri ...
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty
; Gross weight [kg]: 7000; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Stage V Generator, Stage V Aggregaat, Stage 5 Generator, Stage 5 Genset, Stage V Gen set, Stage V Generator set, EU Stage V Generator, StageV, Including : coolant heater and battery charger; Water Tank Volume [l]: 985
; Gross weight [kg]: 3840; Engine: Volvo TAD882GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1800
; Power [PS]: 489; Gross weight [kg]: 4000; Engine: Volvo TAD1344GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 3700; Engine: Volvo TAD1343GE; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 576
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Belt conveyor / conveyor belt / belt Manufacturer: VanderLande Condition: Used Year of Make: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 850 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey SEW motor included Stock: 11 pieces Price per piece Internal Article Number: 2026031201 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your go ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 450 mm cutting diameter: 150 mm stroke: 1300 mm Control: cutting range: 140x140 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece length: 4400 mm profile spindle: 1 Stück main drive: 19,2 kW CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading -------------------------------------------- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Various tool magazines for optimal tooling - Simultaneous feeding with up to 6 workpieces - patented clamping system for optimum machining of workpieces - CNC controlled work table with automatic positioning of the beams and Stretcher - Automatic reclamping for changing between external and internal profiling - INTEGRATED windowing software, i. Machine does not have to (but can Of course) be controlled from the office with external industry software. - powerful engine with 19.2 kW HSK-63 E - Loading and unloading conveyor Ask for a quote and see for yourself unbeatable value for money! VIDEO from the m ...
Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Belt conveyor / conveyor belt / belt Manufacturer: VanderLande Condition: Used Year of Make: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 850 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey SEW motor included Stock: 11 pieces Price per piece Internal Article Number: 2026031201 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your go ...
Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...
table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140
; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110
x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...
turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used mozzarella production line. New 2013. The line includes: - Tank for preliminary pressing of cheese curd - LT150 thermizer - Molds for shaping the curd - Chilled water tanks - Brine tanks - Tube heat exchanger for cooling brine Cheese curd plasticizing set consisting of: Tanks for pre-pressing cheese curd with an automatic device for cutting into small portions. The prepared cheese curd is fed into the thermizer for plasticization. The plasticized mass is manually formed into cheese molds. The portions prepared in this way, packed in molds, are cooled in an ice water tank. After cooling, they are removed from the molds and placed in brine tanks. After salting, the mozzarella blocks are sent to a ripening room with specific temperature and humidity parameters.
Material conveyor belt LT-400 | Inclined conveyor belt for waste loading and material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 400 mm Working length: 3000 mm Working speed: 15 m/min. Maximum head: 1950 mm Gearbox: Bonfiglioli 0,55 kWt Weight: 250 kg
Material conveyor belt LT-500 | Inclined conveyor belt for material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 500 mm Working length: 4000 mm Working speed: 15 m/min. Maximum head: 2200 mm Gearbox: Bonfiglioli 0,75 kWt Weight: 320 kg
throat: 1800 mm workpiece height: 750 mm Travel: 4000 mm table width: 5500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...
turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 5000 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
