127,273 used machines on RESALE, but how to find them? Machine Search
Technical data for the pallet rack stand: Shelving system: Bito Type: PL 38 Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 90 x 65 x 1.80 mm Profile Type: SP18 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,030 mm high 1,100 mm deep
Stainless steel Dimensions: 730 / 680 / 700 mm.; Weight: 40 kg.; Bottom thickness: 5 mm.; Side thickness: 2 mm.; 4 wheels with a diameter of 150 mm.; Conform to DIN 9797;
-Electric control -Cooling as desired - water or air -Stainless details and stainless evaporator -Direct transmission -Easy access to components -ABS Plastic cover -Highly efficient machine without losses -Net dimensions: 920 / 594 / 867 mm. -Receiving hopper with a capacity of 55 kg. - Power supply: 230 / 50 / 1 - Power: 820 watts - Refrigerant: R452A -1 year warranty Category: Ice generators Label: Ice
bore capacity in steel (diameter): 3 - 5 mm throat: 150 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Various Special purpose drilling machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;
For sale is a top-equipped system for briquetting including silos, conveyor technology and packaging unit, consisting of the following components: For sale is a comprehensive briquetting plant including silos, conveyor technology and packaging unit, consisting of the following components: Silo and discharge technology 2x steel silos, each approx. 20 m³ usable capacity Including silo discharge systems Briquetting presses 1x Briquetting press SPM PAWERT AG, Type 84/1 - I 90/200, Masch.-Nr. 1060, Power: 55 kW 1x Briquetting press SPM PAWERT AG, Type 96/1 - I 90/200 SBP, Masch.-Nr. 1140Bj.2021 Conveyor and transport system Complete transport route including: • - 2 cooling lines • - All conveyor belts, roller conveyors and accessories Cutting & packaging technology 2 cross-cut stations with noise protection cabin 1 Feeder KÖRA Packmat, type presumably EF-235 1 shrink pack ...
Key data: 200 KW, 250 kVA, 400 V
Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil l ...
Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment
cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)
Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg
Key data: 160 KW, 200 kVA, 400 V
Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil ...
Key data: 16 KW, 20 kVA, 230 V
Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...
Santasolo Gearbox Part No.: 2KC110 The spare part is in good condition nevertheless, this is a used items, which has or may show signs of wear.
Machine Details Warehouse number 1105-03676 Machine type CNC lathe Make MAZAK Type SQT 200 Year of construction 1998 Control type CNC Control Mazatrol fusion 640T Storage location FRANCE Country of origin Japan Delivery time ON REQUEST Freight base EX WORK Price Technical details Turning diameter 350 mm Turning length 514 mm Control Mazatrol fusion 640T Circulation diameter 530 mm Spindle nose A2-6, 62mm Spindle bore 51 mm Speed 35-5,000 rpm Turret head (x-fold) 12-fold x-travel 166 mm z-travel 530 mm Total power requirement 18.5 kW Machine weight approx. 5.65 t Information 2-axle, WITH tailstock, WITH SPAENEFOERDER WITH MAZAROL T PLUS
I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.
SPECIFICATIONS: TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530 plus) Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts sheet thickness of mild steel: 20 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 10 mm STANDARD: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Spraying device - Motion unit for high-precision machining - Additional highly dynamic axis Yp - Drives with maintenance-free three-phase servo motors - Closed beam guidance - Conveyors for small parts and waste - NitroLine - FlyLine - Penetration detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Logbook function laser CUTTING HEAD: - Laser cutting ...
Key data: 1140 °C
Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...
ERMAK GMR 2600 X 4 mechanical guillotine shears were built in 2007 in Turkey by ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. The machining process is performed by high alloy steel cutting knives with adjustable gap between blades. Automatic hold-down system, in turn, prevent the sheet metal from sliding during machining, ensuring uninterrupted production of repeatable parts. Moreover, the operator’s daily work is facilitated by the convenient foot switch control and the intuitive NC control, which allows the creation of machining programmes in just a few steps. The GMR 2600 X 4 guillotine shears weighs 3750 kg. Technical specifications of the ERMAK GMR 2600 X 4 guillotine shears - NC control - maximum workpiece length: 2600 mm - maximum workpiec ...
Brand SASS Italy Model TRM 2200 Capacity 100 mm Spindle taper MT 6 Drilling depth 500 mm Spindle speed 18-1600 O-min. Horizontal movement 1845 mm Distance table spindle 2230 mm Colum diameter 550 mm T-slot base plate size 22 mm Floor dimensions 3500 x 1250 mm Power 11 Kw Weight 9000 Kg Dimensions L x W x H 3500 x1250 x 3700mm Extra Block table angle adjustable 760 x 1000 x 600 mm Blok table 1000 x 1000 x 600 mm
DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz ...
Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg
Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white ...
Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included
Storage paternoster, Kardex, approx. 5.96m high, 250kg / gondola – used - : Price ex location: 14.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer Kardex Type: IND-250-4010.5 Device number: 116/24464 Year of manufacture: unknown, before 2000 Device height: approx. 5.96m Device width: approx. 3.01m Device depth: approx. 1.24m + 0.30m for the table shelf = total 1.54m Number of gondolas: 40 pieces Dimensions of gondolas: Width: approx. 2.48m Height: approx. 23cm Depth: approx. 41cm Max. load capacity per gondola: 250kg Total permissible payload: 10,000kg Unload: 1,000kg Dialing the gondola via the number of the gondola no longer works – the device must be controlled via the up/down button. Condition: good, Available: immediately Location: 45481 Mülheim a.d. Ruhr
Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm
The Clark-Hurth Spicer 13.5 HR 28369-1 Gearbox is a heavy-duty transmission system for industrial and off-highway applications. Known for its durability, high torque capacity, and reliable performance, this gearbox is widely used in construction equipment, material-handling vehicles, and other demanding industries. Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency Additional Information PDF Brochure Available (Contact us for details) Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency ...
General Information Brand: Nissens Product Type: Hydraulic Oil Condenser Dimensions (LxH): 150 × 210 cm Quantity: 1 unit Price: Per piece Technical Specifications Cooling Motor: Power: 2 × 2.2 kW (Total: 4.4 kW) Voltage: 230V / 400V Speed: 950 rpm Number of Motors: 2 pieces Operating Parameters: Max Operating Pressure: 5 Bar Max Temperature: -30°C to 65°C Cooling Type: Air-cooled Cooling Medium: Hydraulic oil Key Features ✅ High Cooling Efficiency: Designed for heavy-duty hydraulic applications ✅ Durable Construction: Built to withstand industrial conditions ✅ Dual Motors for Enhanced Performance: Ensures optimal heat dissipation ✅ Wide Temperature Range: Operates in extreme temperatures ✅ Versatile Voltage Compatibility: Supports both 230V and 400V systems Typical Applications Hydraulic Systems: Cooling oil in industrial hydraulic ...
very stable automatic with protective lock and max. 275 saw blade
diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
Technical data for the pallet rack traverse: Shelving system: Vogelsang Type: NS Included in delivery are: 01x pallet rack traverse, used Material color: cream white Truss type: K110 Box profile: 110 x 50 mm Agraffe: 4 HK (hooks) Clear width: 2,700 mm load per pair of trusses 2,700 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting
SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 2600 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...
Leutenegger (Starrag) washing box Specifications Year of construction: 2000 Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Shipping costs on request
SSI Schäfer PR 600 Longitudinal Traverse 2700 mm Pallet rack truss with a clear width of 2700 mm for three Euro pallets per pair of trusses next to each other. The Travers can be loaded with up to 1500 kg per pair of trusses. Suitable for the PR 600 pallet racking system. for quick adjustment of your shelves or easy replacement the longitudinal crossbars guarantee a force-fit and form-fit connection with the shelf supports with welded-on 5-hook suspension straps Height-adjustable in the grid of the system perforation 50:50 mm As a replacement for damaged rack trusses, as well as for the expansion of existing racking systems. Specifications: Manufacturer: SSI Schaefer Truss Type: TRV1-270-084-30CE Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height adjustable at intervals of 50 mm 5-hook hook tabs Material: Sheet steel Surface: lacquered Co ...
Technical data for the pallet rack traverse: Shelving system: Meta (Thyssen) Included in delivery are: 01x pallet rack traverse, used Material color: orange INP profile: 100 x 50 mm Agraffe: 3 HK (hook) Clear width: 2,700 mm load per pair of trusses 3,000 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting
Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer) ...
Corundum stone mill + excenter screw pump + vessel Corundum stone mill Manufacturer: Fryma Type: MK-250 Year of construction: 1995 No.: M16732 Pressure working space: 4 bar Pressure double jacket: 6 bar Power: 18.5 kW with double jacket & double-acting mechanical seal with switchgear with outlet chute with grinding gap adjustment with pressure gauge with sight glass Excenter screw pump Manufacturer: Netzsch Type: NL 30 A Year of construction: 1995 Power: 1.1 kW Vessel LBH volume: 750 x 750 x 650 mm System on movable stainless steel frame LWH: 1500 x 700 x 1650 mm
CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800
Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm
Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...
; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container
I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.
• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015
maximum number of results exceeded
please refine your search
