133,773 used machines on RESALE, but how to find them? Machine Search
Hydraulic oil cooler AC-M3 High efficiency and stability: Under the action of the fan, the air is used as the cooling source to force the heat away so as to obtain the cooling effect of low cost and high efficiency and the best radiator. The AC-M3 is an industrial hydraulic oil cooler equipped with a 24-volt DC motor. This cooler is specifically designed for use in mobile machinery such as cranes, concrete pumps, and earthmoving equipment. The cooler ensures efficient cooling of the hydraulic system oil and keeps it at an optimal temperature. Nebmev D Dubsy Ex Ipscu Specifications: Cooler type: AC-M3 Voltage [V]: 24 Liquid flow rate [l/min]: 180 Airflow [m³/h]: 1860 Fan motor power/current consumption [kW/A]: 0.35 / 13.5 Recommended fuse [A]: 20.0 Fan diameter [mm]: 305 Noise level (at 1 meter) [dB(A)]: 78.0 Volume [l]: 3.2 Weight [kg]: 14.6
Immediately available New ovens - Exhibition e.g. SLS-15o Electric circulating air oven , Horde wagon Inner BHL: 1200x1800x1600 mm Price from 8,900 + freight
Delta powder hand system from 1900 €
4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...
used
Automatic 12 track counter for packaging of tablets, caplets or soft/hard capsules. Speeds of 10 to 60 containers per minute, depending on materials and application.
Two stainless steel tanks with drain. About 1500 l individual was sold
General Information Brand: Nissens Product Type: Hydraulic Oil Condenser Dimensions (LxH): 150 × 210 cm Quantity: 1 unit Price: Per piece Technical Specifications Cooling Motor: Power: 2 × 2.2 kW (Total: 4.4 kW) Voltage: 230V / 400V Speed: 950 rpm Number of Motors: 2 pieces Operating Parameters: Max Operating Pressure: 5 Bar Max Temperature: -30°C to 65°C Cooling Type: Air-cooled Cooling Medium: Hydraulic oil Key Features ✅ High Cooling Efficiency: Designed for heavy-duty hydraulic applications ✅ Durable Construction: Built to withstand industrial conditions ✅ Dual Motors for Enhanced Performance: Ensures optimal heat dissipation ✅ Wide Temperature Range: Operates in extreme temperatures ✅ Versatile Voltage Compatibility: Supports both 230V and 400V systems Typical Applications Hydraulic Systems: Cooling oil in industrial hydraulic ...
Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)
Scissor-bubtisch with driven roller conveyor - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Built: 2013 Type: Roller conveyor / scissor stroke table Length of roller conveyor: unknown Wide element approx. 75cm Roll length: approx. 68cm Roll width: approx. 5cm Element height: approx. 15cm Lifting height: currently approx. 78.5cm Engine: SEW Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)
Desoutter CVI II Controller with Angle Wrench Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle wrench : 01C11200 CVI II Controller From simple start-ups to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy and operator comfort on every connection. The controller has various interfaces, including an Ethernet port, an RS232 port and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld power tool of the ER series or a stationary screwdriving spindle of the EM series. It is important to note that the CVI II can also be used in combination with a transducer-controlled angle wrench such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Storage capacity Between 2,500 and 8,500 screwdriving results per station de ...
Azelio A-SE13-1 Mini Split Air Conditioner Specifications Electrical power: 13 kW Heating capacity: Up to 50 kW Engine: Stirling, airtight, with increased pressure Heating medium: hot air or filtered exhaust gases Generator: Brushless, manufacturer ABB Built-in systems: pumps, heat exchangers, temperature and pressure sensors Starting requirements: External automation system + filling of the motor circuit with nitrogen under pressure Purpose: - Scientific research and R&D - Prototypes for CHP plants - Development of our own controls and regulations Manufacturer: Azelio Type: A-SE13-1 Dimensions: 1,030 x 720 x 1,850 mm Weight: 510kg. Year of Make: 2020 More items - new and used - can be found in our shop! International shipping costs on request!
Connecting rod used or used with with new socket ready to ship
RECON Charging air cooler ready To be delivered also used
Coffee grinder with extra rollers for a particularly fine grinding degree Power 500-1,500 kg coffee / hour (depending on grinding degree)
TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED 2 SETS VULCAN COUPLINS. RATO S 170 AT STOCK. VULKAN HERNE 2 GERMANY RATO S 1701030 ( TOTAL 8 PCS ) IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Used gastronomy dishwasher / industrial dishwasher of the renowned brand Winterhalter, type UC-XL, built in 2017 in good condition. Undercounter dishwasher for industry and commerce • Dimensions (H x W x D): 82 x 60 x 63 cm • Power supply: 380 V, 50 Hz • Year of construction 2017 Good, used, technically perfect condition. We will be happy to send you further information and photos on request. Please also note our other advertisements. On our homepage www.HERATEC.de you will find a huge selection of used and new (B-stock) furnishings for supermarkets, DIY stores, fashion stores, restaurants, bakeries and warehouses at an absolute discount price! We will be happy to advise you on this by phone or email. The offer of www.HERATEC.de is aimed exclusively at tradespeople within the meaning of § 14 BGB and not at private individuals/consumers within the meaning of § 13 ...
TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED 2 SETS VULCAN COUPLINS. AT STOCK. VULKAN HERNE 2 GERMANY 5G 2701050M ( TOTAL 8 PCS ) IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
Batch container 1.500L, heatable, incl. anchor agitator
Used commercial kitchen equipment from a retirement home. Supply capacity for about 45 people. Cooking island consisting of boiling kettle, tilting frying pan, MKN magnum pan, 2 gas hobs, 2 hotplates, 1 Rational combi steamer CM 101 G and a matching extractor hood. 4-5 work tables with undercounter cabinets/undercounter shelves 4 wall cabinets Racking units Confection cooler We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by consumers within the meaning of § 13 BGB is to be excluded. Good, used, technically perfect condition. We will be happy to send you further information and photos on request. Matching this commercial kitchen and from the same resolution, we also sell the associated commercial kitchen dispensing station, a complete cafeteria, a dishwashi ...
Used Rational combi steamer CM 101 G with base cabinet The device combination requires an appropriate substructure. Height: 115 cm Width: 110 cm Depth: 73 cm Gas-powered 10 tray trays (53 x 32 cm) Steamer cabinet (H x W x D): 45 x 130 x 45 cm We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by consumers within the meaning of § 13 BGB is to be excluded. Good, used, technically perfect condition. We will be happy to send you further information and photos on request. Matching this commercial kitchen and from the same resolution, we also sell the associated commercial kitchen dispensing station, a complete cafeteria, a dishwashing line (rack transport dishwasher), coffee/cocoa machines and a wine and cigar cabinet. In addition, we have a large selection of ...
lying aluminium tank with inner coating with consoles Volume: 20 m3 Dimensions: 2.0 x 6.70 m long
approx. 560m driven cardboard conveyor line, Knapp, with "small sorter" 10 discharge points at the end – used -: Ex-site price (net): 59.500.-€, dismantled, packed and loaded! Manufacturer: Knapp Type:Various Year of Make: 2016 The system consists mainly of roller conveyors, but there are also a few meters of belt conveyors (at least 120m) and riser belts Roller conveyors: Element width approx. 58cm, roll length approx. 47cm Element width approx. 50cm, roll length approx. 41cm Element width approx. 68cm, roll length approx. 59cm But also wider approx. element width approx. 71cm, roll length approx. 63cm, diameter rolls approx. 4.5cm Belt conveyor belt width approx. 47cm Incl. roller conveyor curves, Transnorm belt conveyor curves, diverters, transfers, S-curves, feet, etc. Sale without control, light barriers, Condition: good Available: immediately Location: Un ...
Steel tank with inner coating (glass enamel) can be used above ground or underground Volume: 8.4 m3 Dimensions: 2.20 m x 2.50 m long
Mixing vessel Total volume: 100 l speed-controlled agitator Speed 335-1920 rpm Engine 3000 rpm Lid outlet on the ground very high quality Dimensions LWH: 500 x 500 x 1800 mm Weight: approx. 150 kg
0: , St. Width: 1080 mm Length: 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Process chiller / chiller air-cooled, Type: Phoenix PNG2 4302 HEX MTA S.p.A. The Phönix PNG2 4302 HEX are compact chilled water chillers that are suitable for outdoor installation. - Shell-and-tube evaporators, - Electronic Explosion Valves - Shut-off valves for compressors, - System with compressors and hydraulic soundproofing panels - Ambient temperature down to -20 °C - Storage tank and double P2 pump - Metal mesh protective filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 84 Available delivery pressure bar: 1.8 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1. Refrigeration Circuits (Quantity): 2 Compressors (quantity): 2 Power levels (%): 12.5 to 100 infinitely variable Electrical data: V ...
Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow
Process chiller / chiller air-cooled, Type: Phoenix PNG2 4302 HEX MTA S.p.A. The Phönix PNG2 4302 HEX are compact chilled water chillers that are suitable for outdoor installation. - Shell-and-tube evaporators, - Electronic Explosion Valves - Shut-off valves for compressors, - System with compressors and hydraulic soundproofing panels - Ambient temperature down to -20 °C - Storage tank and double P2 pump - Metal mesh protective filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 84 Available delivery pressure bar: 1.8 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1. Refrigeration Circuits (Quantity): 2 Compressors (quantity): 2 Power levels (%): 12.5 to 100 infinitely variable Electrical data: V ...
process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 22004 ...
Mixing container 150 l Filling lid (diameter 200 mm) Propeller mixer 2.2 kW stable design Outlet with valve (milk pipe) Level detector high-quality workmanship (stainless steel V4A) Dimensions LWH: 700 x 700 x 1850 mm Weight: approx. 170 kg
TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55
Mixing container 150 l with opening lid various lid openings with valve Exhaust fitting with milk tube valve Propeller agitator Speed: 1380/224 Power: 0.55 kW Dimensions LWH: 800 x 800 x 1800 mm Weight: approx. 150 kg
CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...
Aflösebehälter Zettelmeier -Content 250 litres -Built in 2012 -Power 12 kW -Stainless steel -with drain tap
Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate
Conveyor belt, overland belt used Total length: up to 50 m Bandwidth: approx. 550 mm Total width: approx. 930 mm The drive is individually adapted to your requirements. Thanks to our own special machine construction, changes are also possible according to your wishes.
TECHNICAL DATA: Technical principle: Screw compressor Flow rate m3/min: 10.19 Working pressure max bar: 7,5 Total power installed kW: 63 Rotation speed max rpm: 1465 Weight Kg: 1480
Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm
Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS program ...
Trough length approx. 7300 mm Trough width approx. 280 mm Trough depth approx. 400 mm Inlet approx. 640 x 280 mm Spout approx. 320 x 280 mm Taker distance approx. 160 mm Taker width approx. 180 mm Chain gears Drive gear motor SEW-Eurodrive R67-DVE100M4 230/400 V; 8.0/4.6 A; 50 Hz; IP54 Power: 2.2 kW; 1455/62 rpm Total approx. 7400 x 750 x 1000 mm
Machine details Bearing number 1105-03112 Machine type Machining Center - Vertical Make FAMUP Type MCX 600 Built in 1995 Control type CNC Warehouse HAGUENAU Country of origin Italy Delivery time immediately Freight base EXW 'as available' Technical details x-path 600 mm y-path 400 mm z-way 400 mm Control SIEMENS 810 D - Travel X-axis 600 mm - Travel Y-axis 400 mm - Travel Z-axis 400 mm - Number of NC axes 3 - Clamping surface (left-right) 400 mm - Clamping surface (front-rear) 400 mm - Workpiece weight (max) 300 kg - Speed range up to 6000 rpm - Tool holder ISO SK 40 - Drive power (max.) 11 kW - Number of tool positions 18 - Tool diameter max. 75 mm - Tool change time 2 s - Space requirement length 3200 mm - Space requirement width 2,900 mm - Total height 2600 mm - Total weight approx. 3500 kg Information Machine under power CNC SIEMENS 810 D Count ...
maximum number of results exceeded
please refine your search
