heavy lathe used for sale

Auction-ID: A1-46933-7

Offer 21377 Technical data approx.: - 21 storage levels / compartments with inserts - 18 x compartment height approx. 100 mm - 3 x compartment height approx. 150 mm - Compartment – total width inside 1380 mm - Compartment – total length 2600 mm - Space requirement W 1500 x D 2600 x H 3480 mm - Transport height folded 2600 mm

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Offer 22459 Technical data approx.: - 13 storage levels / compartments with inserts - 11 x compartment height approx. 100 mm - 2 x compartment height approx. 150 mm - Compartment – total width inside 1380 mm - Compartment – total length 2600 mm - Space requirement W 1500 x D 2600 x H 2350 mm

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

300 Heavy Duty Grating 48 x 133 cm Used goods, very good condition, see pictures Hot-dip galvanized Weight load: approx. 450 kg/m² Dimensions: 480 x 1330 mm Mesh size: 20 x 30 mm Bearing rod height: 45 mm Material thickness bearing rod: 3 mm Negotiation price: € 30,-- net per piece from stock Larger quantities on request! Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 9 pieces.

Key data: 55 KW, 300 1/min

Herford engine, 1-cylinder, horizontal, 300 rpm, 75 hp, overhauled

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 6 pieces.

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 9 pieces.

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 6 pieces.

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 9 pieces.

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 9 pieces.

Manufacturer: Tegometall Type: CI Condition frame: used / pre-assembled Condition truss: used Possible and offered positioning - 140 x shelf bays 2800 mm with 5 x levels per field / per level 3000 Kg shelf load - 19 x shelf bays 1900 mm with 5 x levels per field / per level 2000 kg shelf load Total 2748 parking spaces incl. ground parking space Quantity structure - 169 pieces Frame height 8,450mm / depth 1,000mm / Max. 21,000 kg bay load with articulation length of 1,350mm, truss in the bolted version, white painted pre-assembled - 1400 pieces of trusses ( profile 130x50mm ) length 2,800mm / 3,000 kg shelf load with equal load, painted white - 190 pieces of trusses ( profile 100x50mm ) length 1900mm / 2,000 kg shelf load with equal load, painted white - 3180 pieces of locking pins - 338 Ground Anchors B12 - Including load specifications for self-expression Sale ...

LHS Lagertechnik. NEW AND USED SHELVING SYSTEMS OF ALL KINDS. On 20,000m² - Pallet racks - Multi-storey stages - Shelving racks - Cantilever racks - Tire racks - Packing tables - and much more Various manufacturers in different sizes and lengths immediately available from stock Kaarst Manufacturer examples: Jungheinrich, Bito, Meta, Thyssen, Stow, SLP, Dexion, Galler, Schäfer, ! Currently over 10,000 pallet spaces IMMEDIATELY available We will be happy to make you an individual offer tailored to your needs (lengths / heights / loads). Demand and system determination of existing systems is also possible. The indicated price serves as a guideline for used goods and refers to gross per parking space incl. 19% VAT. Purchase / assembly and disassembly / rack inspections can also be offered. ! Do not hesitate to contact us !

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

Heavy-duty shelving stand, pallet rack PAGUS type: Badersleben stand depth: approx. 1300 mm height: approx. 2300 mm shelf load: 1000 kg image similar suitable floors LA1B/130/90, LA1B130/110 Dimensions: 1350 x 100 x 2300 mm

Heavy-duty shelving stand, pallet rack PAGUS type: Badersleben stand depth: approx. 1300 mm height: approx. 3200 mm shelf load: 1000 kg Image similar suitable floors LA1B/130/90, LA1B130/110 Dimensions: 1350 x 100 x 3200 mm

Heavy-duty shelving stand, pallet rack PAGUS type: Badersleben stand depth: approx. 900 mm height: approx. 2300 mm shelf load: 1000 kg Image similar to suitable floors LA1B/90/130o Dimensions: 1050 x 100 x 2300 mm

Heavy Duty Rack Stand, Pallet Rack PAGUS Type: Badersleben Stand Depth: approx. 900 mm Height: approx. 3200 mm Shelf Load: 1000 kg Image similar suitable floors LA1B/90/130o Dimensions: 1050 x 100 x 3200 mm

Heavy Duty Shelf Floor, Pallet Rack PAGUS Type: Badersleben Floor Depth: approx. 1300 mm Width: approx. 1100 mm Shelf Load: 1000 kg Image similar to suitable stand LA1/130/230, LA1/130/320 Dimensions: 1350 x 1100 x 70 mm

Heavy Duty Shelf Floor, Pallet Rack PAGUS Type: Badersleben Floor Depth: approx. 1300 mm Width: approx. 900 mm Shelf Load: 1000 kg Image similar suitable stand LA1/130/230, LA1/130/320 Dimensions: 1000 x 1350 x 70 mm

Heavy Duty Rack Floor, Pallet Rack PAGUS Type: Badersleben Floor without sheet metal cover Depth: approx. 900 mm Width: approx. 1300 mm Shelf Load: 1000 kg Image similar to suitable stand LA1/90/230, LA1/90/320 Dimensions: 1000 x 1350 x 55 mm

Heavy duty swivel castors PAGUS with parking brake wheel diameter: Ø 300 mm wheel width: 90 mm plate dimension: 215 x 215 mm plate thickness 18 mm distance (hole center-hole center) 175 mm New ! Without brake S359 Dimensions: 400 x 400 x 340 mm Weight: 42 kg

Heavy Duty Swivel Castors PAGUS Wheel Diameter: Ø 300 mm Wheel Width: 90 mm Panel Dimension: 215 x 215 mm Plate Thickness 18 mm Distance (Hole Center-Hole Center) 175 mm New ! Without brake S358 Dimensions: 400 x 320 x 340 mm Weight: 37.4 kg

: 3000 kg length: 2500 mm width: 1250 mm height: 510 mm : lenkbar : lenkbar gear diameter: 400 mm weight of the machine ca.: 0,33 t dimensions of the machine ca.: 3000 x 1250 x mm Heavy-duty trailer - Double steering - Drawbar can be switched The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: 06 columns height: 2500 mm - base 800 mm 012 Truss length: 1000 mm

Offer 25080 Sliding - panel shelf with 10 movable material stands Specifications: - Stand - compartment dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / installation area 180 mm - Max. load capacity per compartment 2000 Kg - Slide-in bracket bracket - Track rail L 4750 mm - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

We offer for sale a complete set of Indutec industrial shredder model PM16/3, equipped with all its original components and accessories, ideal for intensive industrial use in the sectors of recycling, material shredding or industrial processing. ✅ General Features: Model: Indutec PM16/3 Type: Heavy Industrial Shredder, High Power Condition: Excellent condition, complete, with accessories and spare parts Total weight: Approximately 47,500 kg divided into two containers + base Composition of the set (ready to operate): First container – N° 128790 – 13,000 kg Engine: WEG 315 S/M – 150 kW – Gearbox: FLENDER B3 SV 11A – 118 kW – Pump: Neuman & Esser CCS 6-M – 0.25 kW – Neuman & Esser clocks: 1.1, 1.2, 1.3, 1.4 Separator Gasket Lubrication tank Mill flange Spare parts set: blade holder, bevel gear, pendulum shaft, body and heads, bolts Second containe ...

Key data: 500 KG, 2800 mm, 2500 mm

3 ladders 3 shelves 6 steel panels 1100 mm deep

Key data: 500 KG, 2800 mm, 2500 mm

2 ladders 3 shelves 6 steel panels 1100mm deep

Key data: 500 KG, 2800 mm, 2500 mm

2 ladders 4 shelves 6 steel panels per shelf 1100 mm deep

Key data: 1350 KG, 2800 mm, 2250 mm

2 ladders 3 shelves 6 steel panels per floor 1100mm deep

length: 5000 mm payload: 18 : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20000 kg length: 6000 mm width: 2450 mm height: 697 mm : lenkbar : lenkbar size of tyres: 450 x 300 weight of the machine ca.: 2,8 t dimensions of the machine ca.: 7,2 x 2,5 x 0,7 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30000 kg length: 6000 mm width: 2500 mm height: 823 mm : lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach mm weight of the machine ca.: 3,2 t dimensions of the machine ca.: 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50000 kg length: 12000 mm width: 3000 mm height: 1100 mm : lenkbar : lenkbar size of tyres: 540 x 300 8-fach mm dimensions: 13,9 x 3,0 x 1,1 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 150000 kg length: 12000 mm width: 5000 mm height: 1400 mm : lenkbar : lenkbar size of tyres: 645 x 250 mm dimensions: 14,4 x 5,0 x 1,4 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg length: 10000 mm width: 2450 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1320mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10000 kg length: 6000 mm width: 2450 mm height: 587 mm : lenkbar : lenkbar size of tyres: 406,4 x 254 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 7,2 x 2,5 x 0,6 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5000 kg length: 6000 mm width: 2450 mm height: 527 mm : lenkbar : lenkbar size of tyres: 406,4 x 127 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 7,2 x 2,45 x 0,527 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40000 kg length: 9000 mm width: 3000 mm height: 900 mm : lenkbar : lenkbar size of tyres: 540 x 300 2-fach mm dimensions: 10,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35000 kg length: 7000 mm width: 2500 mm height: 600 mm : lenkbar : lenkbar size of tyres: 8 Stk. 450 x 300 mm weight of the machine ca.: 3,9 t dimensions of the machine ca.: 8,9 x 2,5 x 0,6 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30000 kg length: 8000 mm width: 2500 mm height: 790 mm : lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach weight of the machine ca.: 3,7 t dimensions of the machine ca.: 9,9 x 2,5 x 0,8 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20000 kg length: 8000 mm width: 3000 mm height: 820 mm : star : lenkbar size of tyres: weight of the machine ca.: 4,0 t dimensions of the machine ca.: 8,25 x 3,0 x 0,82 mm Heavy duty trailer with - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg length: 6000 mm width: 2450 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,6 t dimensions of the machine ca.: 7,2 x 2,45 x 0,625 mm Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - very robust, therefore low maintenance - Reversible drawbar, Length 1200mm - impregnated wooden support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5000 kg length: 5000 mm width: 2000 mm height: 500 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 1,0 t dimensions of the machine ca.: 6,3 x 2,0 x 0,5 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 80000 kg length: 12000 mm width: 3000 mm height: 1100 mm : lenkbar : lenkbar size of tyres: 540 / 300 2-fach mm dimensions: 13,6 x 3,0 x 1,1 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.