We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,919 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
used
turning diameter over bed:2300 mm turning diameter over slide rest:1860 mm turning length:5000 mm centre height:1150 mm swing in gap:- mm length of gap:- mm faceplate:1500 mm bed width:1000 mm max. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kg number of spindle speeds:3-300 U/min spindle bore:206 mm tailstock quill diameter:- mm tailstock quill stroke:- mm Weight approx.:26 t spindle drive:50 kW DRO:optional 4 jaw chuck:1500 mm Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm
used
Key data: 5000 mm, 4000 mm, 22000 mm
Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...
used
Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960
used
CNC-heavy duty lathe Kramatorsk 1A660 Year of manufacturing: 1984 Distance between centers: 11.500 mm Turning diameter: -Over bed: 1650 mm -Over cross slide: 1340 mm Work piece weight: max 25 tn Spindle bore: 105 mm Spindle speed range: 0,5 - 250 rpm Cross slide travel: 735 mm Spindle stock pinol travel: 260 mm Threads: -Meter: 1 - 96 mm/r -Whitworth: 20 - 3/8 -Modul thread -D-P thread Size: -Length: 17.100 mm -Width: 2.800 mm -Height: 2.000 mm -Weight: 46,5 tn Control: Bosch M5
used
turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 5000 mm spindle bore: 146 mm spindle taper: DIN 55027/15 turning diameter in the gap: 1250 mm bed width: 700 mm quick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/min feeds - longitudinal: 1-3000 mm/min feeds - cross: 1-3000 mm/min rapid travel - longitudinal/face: 6000 mm/min thread - mm pitch: 0,5 - 480 mm thread - inch: 60 - 1/16 Gang / inch. thread - module: 0,125 - 120 voltage: 400 V / 50 Hz main drive: 30 kW Control: total power requirement: 35 KVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 7,2 x 1,75 x 1,9 m • new heavy duty lathe with infinetely variable rotation speed via frequency converter, • at basic price with normal accessories according to list, • possible special acccessories according to separate make-up. The dat ...
used
Turning diameter: 1000 mm Center distance: 5000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 14000 kg Make Skoda SRM 1 Type SRM 100 x 5000 Year 1976 Heavy Duty Lathe Centre height (mm) Swing bed = 1.000 Center distance (mm) DBC = 5.000 Spindle bore Work load = 14 T incl. 4 chuck 1000 mm incl. steady rest 500 mm Power 40 kW / bed width 950
used
Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation
used
Turning diameter: 5400 mm Center distance: 3200 mm Spindle bore: 10000 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg 4 bed way heavy duty lathe schwer drehmaschine Merk: 4 Bed Wagner Type: D1600 10 IV 40 Jaar: 60/70/90 er Center hoogte (mm): Swing bed = 3.200 Center afstand (mm): Swing sup = 2.700 Doorlaat (mm): DBC = 10.000 mm Load up to 40 Ton Steadys up to 1.800 4 Chuck 3.000 Double carriage Driven tailstoc Main bearing replaced Renewal Feed / Dro MACHnumber: 597
used
heavy duty lathe for gas turbine and power generating BEST accuracy! max dimeter -2450mm. between centers-9000mm. Weight-110000 kg.
used
Meuselwitz SAXW 1000 / X7000P heavy duty lathe Ã1000 x 7000 x 22 Tons maximum machining values. You can find more details among the uploaded pictures.
used
Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type
used
Waldrich 10 meter heavy duty lathe with chip conveyor Distance between centers : 10500 mm Max turning diameter: 1,006 mm Maximum clamping grip 1030 mm Working pressure weight: 25 ton Main Motor power: 25 kW
used
Producent: KRAMATORSK Model: 1A670 Condition: Good, machine is complete, Year of manufacture: 1975 Technical details Swing over bed: 2000 mm Swing over carriage: 1600 mm Max. distance between centres: 10000 mm Width of bed: 2240 mm Centres height: 1060 mm Max. workpiece weight: 63 000 kg Spindle hole: 80 mm Spindle cone ( 1:7): 120 mm Tailstock taper (1:7): 120 mm Spindle speeds range( stepless): 1-125 rpm Main motor power: 100 kW Installed power: 112,5 kW
used
CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU
used
Make SKODA type SUA 125 PA built 1992 place of storage from location country of origin Czech Republic delivery time immediately freight base from location Technical details: turning diameter over bed 1500 mm Turning diameter over support 1100 mm turning length 13000 mm Control SIEMENS 820 T plan disc speed range 0.9 - 315 r pmWork unit weight between tips max. 14000 kg Main drive DC 42 kW Total power requirement 65 kW Machine weight approx. t space requirement approx. m Additional information - CNC control SIEMENS 820 T - increased turning diameter 1500 mm - positioning of the flat disc via M-function or manually in typing mode with digital display - other accessories: + belt grinding device + 2 bezels max. 630mm and 4.8t load capacity + 2 roller blocks max. 950 mm and 7t load-bearing capacity - Hydrostatic main spindle bearing
used
1.1. Tacchi turning lathe Model DB 1900 x 10.000 Series 132 L • CNC Sinumerik 840 DE-SL • Centre height from the ways 1,900 mm • swing over saddle 3,050 mm • Swing over bed, without telescopic covers 3,300 mm • max. work piece weight 40,000 kg • Min. and max. distance between headstock and Tailstock without steady rests 500 – 10.000mm • Main headstock o Diameter face plate 3.000 and additional 1.000mm o Integrated C-Axis o Drive power S1 (100%) 95 kW o Range of spindle speed 1 – 400 rpm o Number of speed ranges 3 o torque 80,000 Nm o Spindle nose DIN 55026 20" o Spindle hole 160mm • Tailstock o Quill diameter 450mm o Quill stroke 200mm o Internal taper Metric 100 at 60° • Equipment o 12-position live tool turret Station diameter VDI 620mm Power 18.5 kW Max torque 400 Nm Max speed 1,500 rpm o Y-axis Vertical ...
used
Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels
used
Turning diameter: 2800 mm Center distance: 24000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 56000 kg CNC Brand: _Unknown / Other CNC Model: Skoda MACH-id 5216 MAKE SKODA CZ TYPE SR 2 - 200 YOP 2007 SPECIFICATIONS Max. turning diamter Ø 2800 mm Swing 2200 Ø DBC Turning length 24000 mm Y-Axis- 250 / + 450 mm Z-Axis 1000 mm C-Axis 360000 ° Main Spindle speed 400 Rpm ATC / revolver 4 Speed live tools 1800 Rpm Contro l840D DIMENSIONS ...
used
turning diameter over bed: 1930 mm turning diameter over slide rest: 1520 mm turning length: 5000 mm turning speeds: 0,5-250 U/min spindle bore: 105 mm workpiece weight: 35 t steady: 400-700 mm steady: 700-1200 mm steady: 1000-1600 mm control: Siemens total power requirement: 106 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2100 mm turning diameter over slide rest: 1300 mm turning length: 6800 mm workpiece weight: 25000 kg main drive motor: 140 kW Control: Siemens type: 840 C faceplate: 1100 mm bed width: 2500 mm steady: 800 mm steady: 800 mm steady: 800 mm steady: 600 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 600 mm centre distance: 6200 mm spindle speed:: 1.6-315 U/min tailstock quill diameter: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t steady: 3 digital readout: total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 11x2,4x1,9 m drive motor: 75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2200 mm turning diameter over slide rest: 2200 mm turning length: 10000-11000 mm control: Sinumerik 840 D workpiece weight: 70.000 kg faceplate: 2000 mm steady: 2 Torque: 125000 Nm feed: 0,3-4000 mm/min rapid traverse: 4000 mm/min roll stand: total power requirement: 110 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 22x6,2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: 45 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 0 Weight between centres maximum: 40000 kg MACH-id 3990 MAKE Poreba Poland TYPE TCG 160 YEAR 1995 SPECIFICATIONS Swing over bed Ø 1600 mm Swing over cross slide 1300 mm Distance between centres 10.000 mm Work piece weight 40.000 kg Spindle speeds / ranges 200 Rpm Bed width 1300 mm Power 75 Kw DIMENSIONS Length 15900 mm Width 2800 mm Height 2800 mm Poreba TCG 160 lathe, we ha ...
used
Turning diameter: 2500 mm Center distance: 10000 mm Spindle bore: 0 mm Numbers of bed guide ways: 4 Weight between centres maximum: 100000 kg CNC Brand: _Unknown / Other CNC Model: Bosch MACH-id 588 MAKE Skoda TYPE SIU 250 YEAR 1979 / 2003 SPECIFICATIONS Swing over bed Ø 2500 mm Control Bosch Swing over cross slide 2000 mm Distance between centres 10000 mm Work piece weight 100.000 with steady kg Spindle speeds / ranges 0,32 - 125 Rpm Bed width 3750 mm CNC Bosch Make : Skoda Pilzen Type : SIU 250 Age : 1979 No : Ob 21776 Swing over bed ...
used
Turning diameter: 6400 mm Center distance: 18000 mm Spindle bore: 220 mm Numbers of bed guide ways: 0 Weight between centres maximum: 80000 kg MACH-id 4069 MAKE Zerbst Germany TYPE DXP 5 YEAR 1987 SPECIFICATIONS Swing in the gap Ø 6400 mm Distance between centres 18.000 mm Work piece weight 80.000 kg Spindle bore 220 mm Spindle speeds / ranges 22,4 Rpm Power 70 Kw DIMENSIONS Length 25.000 mm Width 15.000 mm Height 10.000 mm
used
turning diameter over bed: 1600 mm turning diameter over slide rest: 1200 mm turning length: 6000 mm spindle diameter: 100 mm speed: 1,8 - 355 (x24) m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 10000 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2000 mm turning diameter over slide rest: 1500 mm turning length: 10000 mm speed: 1,4 - 71 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 920 mm turning diameter over slide rest: 720 mm turning length: 4000 mm turning speeds: 1,4-280 U/min digital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 2100 mm turning diameter over slide rest: 1400 mm turning length: 10000 mm centre distance: 11300 mm faceplate: 1300 mm workpiece weight: 40 t steady: 4 Rest: 2 bed width: 2350 mm diameter of main spindle in front bearing: 560 mm tailstock quill diameter: 480 mm total power requirement: 150 kW weight of the machine ca.: 118 t dimensions of the machine ca.: 20x4x3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
turning diameter over bed: 1400 mm turning diameter over slide rest: 1000 mm turning length: 11280 mm faceplate: 1250 mm workpiece weight in steadies max.: 20000 kg steady: 395 mm steady: 620 mm workpiece weight: 16000 kg total power requirement: 40 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Diameter over the bed 1600mm. Diameter over the slide is 1250mm. Workpiece diameter min, 320mm. Workpiece length 8000mm. Spindle bore 80 mm. The greatest total cutting force is 16 tons. The greatest weight of the workpiece, 40 tons. Power el. drive motor, 76 kW. Machine dimensions: 14520x2965x2330 mm. Machine weight, 61 t.
used
Turning diameter: 3750 mm Center distance: 10000 mm Spindle bore: 105 mm Numbers of bed guide ways: 4 Weight between centres maximum: 100 kg
used
Turning diameter: 2500 mm Center distance: 10000 mm Spindle bore: 560 mm Numbers of bed guide ways: 0 Weight between centres maximum: 160000 kg CNC Brand: 0 CNC Model: CNC Control
used
FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS ...
used
Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500
used
Wheel lathe Rafamet UBB - 112 , one side of the machine isn't working
used
Main characteristics: faceplate diameter - 2800 mm, The diameter of the installed product is 3200 mm, Workpiece weight - 16000 kg., The height of the installed product above the faceplate - 1600 mm, Machine weight - 43,000 kg.
used
Manufacturer Tacchi Model FTC56 Year 1989 capacity 7000 x 1600 mm
used
Date of overhaul: 2006 Swing over bed: 4000 mm Distance between lathe tips: 30 000 mm Speed: 0,5-80 rpm Workpiece weight:160 t Control system: CNC SIEMENS SINUMERIK 840 D