heavy lathe used for sale

Spindle support for SUI 80 longitudinal direction

An old, compact precision turret lathe Boley & Leinen is available. Speed: 4000rpm, tool stations: 6, center height: 90mm, distance between centers: 300mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

turning diameter: 330 mm turning length: 650 mm spindle turning speed - stepless: 30-5000 U/min spindle taper: ASA A2-5 control: FANUC 18i-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A conventional center lathe is available. An on-site inspection is possible.

General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.

Manufacturer: HK-CON Model: L2SDZ-6 SUS-090 Type of Machine : Lathe Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC Swiss lathe GILDEMEISTER SPRINT 20/8 linear With Fanuc 31i controller Year of Make: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 80 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke Z 2 : 300 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 Pos. Tool Holder 12 x 12 5 rotating tools including spindles with clamp holder ESX 16 SLIDE 2 Stroke x 2 : 240 mm 4 position tool holder for external machining with connection 12 x 12 4 position tool holder for internal machining diameter 20 mm 5 rotating tools including spindles with clamp holder ESX 16 6 + 2 axes, 2 Y axes as standard Linear actuator for maximum precision With the following accessories: Full protection cab with interior lighting Various tool holders C axis for main and counter spindle Bar Feeder L ...

Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder

Key data: 430 mm, 1400 mm

Guide and pull spindle 32 A 380V 12.5 KW Speeds 18 - 1400 rpm Spindle passage 90 mm Lamp 4-way quick coupler with 14 pick-ups 3 interchangeable jaw sets Röhm Jaw Chuck with 33 cm Bezel Length 1.10 m Width 3 m Height 1.40 m Weight 2.5 T

CNC Swiss lathe GILDEMEISTER SPRINT 20/8 With Fanuc 32i control Year of manufacture: 11/2019 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 60 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke x 2 : 220 mm Stroke Z 2 : 170 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 325 mm SLIDE Y 2 Stroke Y 2 : 85 mm With the following accessories: Full protection cab with interior lighting Various tool holders Tool holder for slides 1-3 4 driven tools with 4 spindles with ESX/ER 16 holder C axis for main and counter spindle Y axis on carriage 1 – 2 2 cross slides Workpiece unloading conveyor Signal light 4 colour Fire extinguishing system Coolant device 165 l ( Pumping capacity 90 l/min 1 bar) THE MACHINE IS IN MINT CONDITION THE MACHINE HAS ONLY 110 PROGRAM RUNNING HOURS

Manufacturer: Gildemeister Model: GMX 300 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

Automatic lathe Genini ROTOUR 100 Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor Net price

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Manufacturer: Emco and Padovani Model : EMCOMAT-E200/1000 Year of manufacture: 2001 CE certified: Yes Included with the Machine - Complete set of tools - Full set of accessories Find more here - .ucymachines/ Contact us at - sales@ucymachines

1 L+Z lathe Make: VDF-Oerlikon Boehringer Model; DUE 560 Year of Make: 1986 Turning diameter over bed: 570 mm Turning length: 1000 mm Speed range: 11.2 - 2240 rpm Weight of the machine: 3.8 tons. Accessories / equipment: digital display, chip protection. Conveyor belt cover, Coolant device, rapid traverse.

Manufacturer: CMZ Machine type: CNC Lathe Model: TTL-52-52-T1M-T2M+GL20II Year of manufacture: 2021 CE certified: Yes Key Features - 2-spindle automatic CNC lathe for series production - Integrated stacking magazine for automated part loading - Integrated robot GL20II for fully automated production cycle - Designed for high-volume precision series parts Electrical and Mechanical Data - Supply voltage: 400 V AC - Phases: 3 + N + PE - Frequency: 50 Hz - Max. power: 90 kVA - Max. current: 125 A - Pneumatic pressure: 6 bar - Machine weight: 11,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hours in picture Find more here - .ucymachines/ Contact us at - sales@ucymachines

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

CONTROLS   CNC Teach In Controls MONFORTS MTC-K WORKING RANGE TURNING   swing diameter (max): 500 mm   turning diameter (max): 290 mm   worpiece length max.: 1500 mm MAIN SPINDLE   spindle revolutions (min): 3 /min   spindle revolutions (max): 2800 /min DIMENSIONS / WEIGHTS   space requirements -left/right-: 3325 mm   space requirements -front/back-: 1550 mm   total height: 1740 mm ATTACHMENTS (TURNING)   tailstock: yes   European CE standards: yes

Turning diameter over bed: 600mm, turning length: 1000mm, spindle head: 8, spindle bore: 63mm, tailstock quill size: MK5, gap: yes, faceplate diameter: 500mm, machine dimensions X/Y: 2800mm/1100mm, weight: approx. 2200kg. Including quick-change tool holder Multifix C, faceplate and coolant device. The front guide of the machine is worn and the feed in the apron is blocked. The bed slides can be moved via the lead screw. Documentation available. An on-site inspection is possible.

clamping range: J) 50- 115 mm clamping range: A) 170- 260 mm internal diameter: 110 mm external diameter: 176 mm weight: 3,3 kg Unused jaw turning ring - switchable jaws for bigger clamping range - mainly for chucks up to Ø 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: Ø16 mm mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2045 x 900 x 1685 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 450 mm

Inv. Num. : 9150 Type: CNC 10 A/B Producer: DÖRRIES Created: GO 2015 Parameters: Control system: Siemens Sinumerik SL Table diameter: 1000 mm Engine power: 69 kW Max. workpiece diameter: 1500 mm Max. workpiece height: 450 mm Max. workpiece weight: 5000 kg Maximum table speed: 2-120/ 20-400 1/min Equipment: Chip conveyor 4-position turret Hydraulic/Manual 3-Jaw Chuck

The machine is in good technical condition, testing is possible by prior arrangement.

Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.

SERVO CONVENTIONAL LATHE WEILER " C 30" With 2 axes Siemens Sinumerik 802 C with WEILER Software C 1 Year of Make: 2002 Spindle bore: 42 mm Center width: 750 mm Circumference Ø over bed : 330 mm Speed range: 1 – 4500 rpm With the following accessories: Multifix Tool Holder Feed protection 3 jaw chuck RÖHM 0 160 mm 2 set of hard top jaws Collet device 3 centering tips Chip drip tray Chip backsplash wall with lighting Coolant Setup 10 Height Adjustable Machine Shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.

A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.

turning length: 1500 mm greates pass round over bed: 490 mm turning dia. over face-slide: 280 mm control: Heidenhain Manual Plus Speed range - up to: 3000 U/min spindle bore: 65 mm power capacity - workpiece power: 12/16 (100/60%) kW weight of the machine ca.: 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9157 Type: SK 12 Producer: TOS Created: 1963 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key

Maximum Spindle Speed 2800 RPM Brand Weiler Power Source Electric Control Type Conventional Machine Weight (kg) 800 Chamfer Triple Model/Type VS1 Year of Manufacture 1979

Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027.

Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

-Hamlet -E50/1 -No.: 474 -Year: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control (whereby the control is probably via sep. desktop PC) -Incl. chip conveyor, various tool holders and tools Shipping available on request. Sale only to tradespeople. Indicated purchase price = Net plus 19% VAT = €9,282.00 Gross

For sale Doosan Multi Task CNC turning center type MX2100LST with a Fanuc 31i-A controller. This Doosan MX2100LST is a high-quality, multifunctional 9-axis CNC turning/milling center. The machine combines the functions of a CNC turning and machining centre in a single clamping (turning-milling). Capacity & Working Area Maximum turning diameter: 540 mm Maximum turning length: 1,540 mm Maximum diameter over bed: 750 mm Maximum diameter over thrust axis: 650 mm Spindles (main and counter spindle) Both spindles offer identical performance and thus enable the symmetrical transfer and machining of workpieces: Lift Plate Size: 8 inches (optional 10 inches) Maximum speed: 5,000 rpm Spindle motor power: 22 kW Spindle bore / Maximum rod diameter: 65 mm. C-axis resolution: 0.001 degrees (on both spindles) Milling spindle (B-axis head) The upper processing head is a fully controll ...

-Guild Master -N.E.F. CT40 -No.: 09213 -Year: probably around 1985 -Operating hours: approx. 27,500 -incl. chip conveyor -incl. workshop cabinet with contents for Gildemeister NEF CT40 --> Metal construction, color: green with black handle strips, 7 drawers, contents: lathe steels, carbide plates, jig etc. Shipping available on request. Sale only to tradespeople. Stated purchase price = net plus 19% VAT = €4,998.00 gross

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (su ...

Schuster VTM 350 Year of manufacture 2005 see pdf on the for specifictions The machine is in working, good condition The 2005 Schuster VTM 350 is a vertical turning lathe designed for precision machining of medium-sized components. This machine integrates advanced features to enhance productivity and accuracy in various industrial applications. Key Specifications: - Maximum Turning Diameter: 200 mm - Maximum Workpiece Height: 350 mm - X-Axis Travel: 200 mm - Z-Axis Travel: 400 mm - Spindle Speed: Up to 8,000 rpm - Tool Turrets: Two turrets, each accommodating 12 tools - Spindle Motor Power: 20 kW - Machine Dimensions (L x W x H): 3,000 mm x 1,700 mm x 3,350 mm - Machine Weight: Approximately 6,000 kg Features: - CNC Control System: Equipped with the Rexroth Indramat System 200 BTV 20, providing precise control over machining operations. - Stepless Feed Rates: Allows feed rates up ...

Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Futureline 650 2004 Stama MC 021 + Fanuc Robodrill Year of manufacture 09/2004 The machine is in working, good condition The 2004 Stama MC 021 is a vertical machining center equipped with a Fanuc Robodrill system, designed for high-speed, precision milling and drilling operations. This machine is integrated into the Schuster Futureline 650 production line, enhancing its automation capabilities for efficient manufacturing processes. Key Specifications: - Model: Stama MC 021 - Year of Manufacture: 2004 - Control System: Fanuc 16i-MB CNC - Axis Travels: - X-axis: 500 mm - Y-axis: 400 mm - Z-axis: 330 mm - Table Dimensions: 650 mm x 400 mm - Maximum Table Load: 250 kg - Spindle: - Taper: SK 30 - Speed: Up to 20,000 rpm - Motor Power: 7.5 kW - Tool Magazine Capacity: 21 tools - Additional Features: - Integrated chip conveyor - Cooling through spindle (IKZ) - Optional NC dividing head for ...

Working range Center distance: 1,500 mm Travel over bed: 570 mm Travel over cross slide: 340 mm Cross slide travel: 290 mm Bed width: 350 mm Spindle Spindle head DIN 55027 size 8 Spindle bore: 93 mm Speed range: 1–3,000 rpm Main drive: 20 kW AC motor Tailstock Quill diameter: 90 mm Quill stroke: 180 mm Mounting: MK 6 Feed Feed force X: 7,000 N Feed force Z: 10,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 10 m/min Machine Weight: approx. 3.6–3.9 t Dimensions: approx. 3,300 × 1,800 × 1,900 mm Equipment Heidenhain Manual Plus cycle control Heidenhain AC servo drives ZF two-speed gearbox (electrically switched) 3-jaw wedge bar chuck Ø250 mm Face plate Ø500 mm Fixed steady rest Tailstock with live center Multifix tool holder Parat 4-station turret Reinforced coolant pump Machine feet Accessories Multifix tool holder package Various turning holders Measuring equipment  ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2003 Operating Hours: approx. 124,705 h (as of May 2026) Total Connected Power: 33 kW Voltage: 400 V / 50 Hz Condition: No known defects. Available for live demonstration. CNC Control - Control: TX8i (64-bit) - Screen: 10.4 inch flat panel display - Interface: V24 RS232 in control cabinet - MDE Interface: Machine running / piece counter - Tool monitoring included - Thread cutting without compensation chuck - Programming: At machine control or via WinFlex IPS software on PC Main Spindle - Spindle Bar Capacity: 36 mm - Max. Speed: 6,300 rpm - Drive Power: AC 6.7 / 10.7 kW - C-axis included - Hainbuch collet chuck system (manual change device included) Counter Spindle - Motor spindle with C-axis - Counter-clamping pressure device - Workpiece ejector - Hainbuch Axfix collet chuck - Upper tool carrier with driven tools and ele ...