heavy fuel used for sale

Echea A-II-6000 lathe. Distance between centers: 6.000mm. Swing: 820mm. Swing in carriage: 600mm. Swing in gap: 1.140mm. Bed widht: 510mm. Spindle: 82mm. Speeds: 12. (12-850rpm). Motor power: 25cv. Max. weight with 1 steady rest: 7.700Kg. Equipped with chuck and 2 steady rest. Weight: 9.600Kg.

There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.

There are three identical racks available, arm length: 4500mm, with documentation, has been regularly serviced, on-site inspection is possible.

7,000380mm, heavy duty wheels, Lenze drive with feed speed control

Turning diameter: 2100 mm Center distance: 14500 mm Spindle bore: 150 mm Numbers of bed guide ways: 1 Weight between centres maximum: 100 kg CNC Brand: Siemens CNC Model: Siemens 840 Max. turning Ø:2100mm X-Axis:        14500mm Z-Axis:        1600mm Speedrange:    180Rpm Spindle power: 150kW Length:        22000mm Width:         4500mm Height:        3800mm Weight:        193000kg

Turning diameter: 3000 mm Center distance: 14500 mm Spindle bore: 560 mm Numbers of bed guide ways: 1 Weight between centres maximum: 100000 kg CNC Brand: Siemens CNC Model: Siemens 840 Max. turning Ø:3000mm X-Axis:        14500mm Speedrange:    180Rpm Spindle power: 2 x 75kW Quill Ø:       560mm Length:        24000mm Width:         7000mm Height:        3900mm Weight:        285000kg

Turning diameter: 1600 mm Center distance: 12000 mm Spindle bore: 120 mm Numbers of bed guide ways: 2 Weight between centres maximum: 20000 kg CNC Brand: Siemens CNC Model: SIEMENS 840D in 2009 retrofitted: New Rittal E-Cabinet New wire & measuring scales New Servo engine New 840D controller New Hydraulics Swing over bed Ø:        1600mm Swing over cross slide Ø:1250mm DBC Turning Length:      12000mm Spindle bore:            120mm Spindle power:           75kW Bed width:               2400mm Speeds / ranges:         224Rpm Feed rate X-Axis:        2500mm/min. Feed rate Z-Axis:        2500mm/min. Length:                & ...

Turning diameter: 1400 mm Center distance: 12000 mm Spindle bore: 105 mm Numbers of bed guide ways: 1 Weight between centres maximum: 10000 kg Centre latheGurutzpe - Super BT  Motorized tailstock Work load 10 Ton 3 x closed steady rest Feeds all directions Chip conveyor DBC Turning Length:      12000mm Swing over bed Ø:        1400mm Swing over cross slide Ø:1060mm Spindle bore:            105mm Spindle power:           50kW Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Speeds / ranges:         400Rpm Length:            &nbs ...

Turning diameter: 1550 mm Center distance: 12500 mm Spindle bore: 100 mm Numbers of bed guide ways: 2 Weight between centres maximum: 22000 kg CNC Brand: Siemens CNC Model: SIEMENS 840D Full C-Axis 360.000 Positions Revolver 12 positions with live tools Live tools 22 kW ans 2250 Rpm Capto C6 tool system C-Steady rest 100 -   500  C-Steady rest 500 - 1000 Package tool holders radial and axial Swing over bed Ø:        1550mm Swing over cross slide Ø:1260mm DBC Turning Length:      12500 (15000)mm Workpiece weight:        22000 Power:                   100A Speeds / ranges:         0,05 - 600Rpm Feed rate X-Axis:        6000mm/min. Feed rate Z-Axis:        6000mm/min. Length: ...

milling device for Skoda lathe SUT160

Large stiffening load, steel platform, 3rd floor for machine construction, stiffening load: 17 meters long, 6 meters wide, 3 floors, top condition, covered with gratings

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 110 mm Numbers of bed guide ways: 2 Weight between centres maximum: 30000 kg CNC Brand: Siemens CNC latheGurutzpe - GLX 16.15.7  4 bed way construction Bed width 1350 mm Chip conveyor 4 chuck 1250 mm Filtration / Coolant system 2 x C-Type steady rest Motorized tailstock Max. turning Ø:1600mm Spindle bore:  110mm Speedrange:    800Rpm Spindle power: 71kW ATC / revolver:4 Chip conveyor: Yes Pinole taper:  6Mk Quill Ø:       220mm Length:        12000mm Width:         4000mm Height:        3200mm Weight:        35000kg

turning diameter over bed: 1000 mm turning diameter over slide rest: 710 mm turning length: 7000 mm max. workpiece weight between centres: 10000 kg spindle turning speed range: 1,8-400 U/min tailstock quill taper metric: 80/1:10 tailstock - quill dia: 170 mm tailstock - travel of quill: 200 mm Tailstock quill travel speed: 2150 mm/min main drive motor: 37 kW longitudinal feeds:: 0,125-48 mm/U face feeds: 0,4 der Längsvorschübe weight of the machine ca.: 17 t dimensions of the machine ca.: 11x1,9x2 m machine was mechanically and electrically overhauled in the last years. - taper turning function - 3 lynettes - misc. center points for tailstock - set of change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internally mounted heavy-duty roller, idler, heavy-duty roller PAGUS Ø 99,6 mm Drum diameter: Ø 99.6 mm Drum length: 246 mm shaft diameter: Ø 50 mm, shaft stump length: 24 mm grease nipple: 1x (one-sided) Material: steel material thickness (roll): at least 9.5 mm New ! Dimensions: 298 x 99.6 x 99.6 mm Weight: approx. 15 kg

Heavy-duty roller, Idler, Heavy-duty roller PAGUS Ø 100 mm Drum diameter: Ø 100 mm Drum length: 246 mm shaft diameter: Ø 50 mm, stump shaft length: 24 mm grease nipple: 1x (one-sided) Material: steel Material thickness (roll): at least 9,, 5 mm New ! Dimensions: 298 x 100 x 100 mm Weight: approx. 15 kg

Interlinking unit, heavy version ORSTA Type 2 TGL 10952/03 Nominal pressure: 32 MPa ( 320 bar ) for two pressure switches type CO, CON, CM Thread: 2x M27 x 1.5 Cable connection: M16 x 1.5 hole spacing fastening screws: 54 mm, 2x diameter: Ø 8.4 mm New ! Dimensions: 80 x 62 x 35 mm

Heavy duty rack stand, pallet rack PAGUS Type: Badersleben Stand Depth: approx. 1300 mm Height: approx. 2300 mm Shelf load: 1000 kg Illustration similar matching shelves LA1B/130/90, LA1B130/110 Dimensions: 1350 x 100 x 2300 mm

Heavy-duty rack stand, pallet rack PAGUS Type: Badersleben Stand Depth: approx. 1300 mm Height: approx. 3200 mm Shelf load: 1000 kg Illustration similar matching shelves LA1B/130/90, LA1B130/110 Dimensions: 1350 x 100 x 3200 mm

Heavy duty rack stand, pallet rack PAGUS Type: Badersleben Stand Depth: approx. 900 mm Height: approx. 2300 mm Shelf load: 1000 kg Illustration similar matching shelves LA1B/90/130o Dimensions: 1050 x 100 x 2300 mm

Heavy duty rack stand, pallet rack PAGUS Type: Badersleben Stand Depth: approx. 900 mm Height: approx. 3200 mm Shelf load: 1000 kg Illustration similar matching shelves LA1B/90/130o Dimensions: 1050 x 100 x 3200 mm

Heavy-duty shelf floor, pallet rack PAGUS Type: Badersleben Boden Depth: approx. 1300 mm width: approx. 1100 mm Shelf load: 1000 kg Illustration similar matching stands LA1/130/230, LA1/130/320 Dimensions: 1350 x 1100 x 70 mm

Heavy-duty shelving floor, pallet rack PAGUS Type: Badersleben Boden Depth: approx. 1300 mm width: approx. 900 mm Shelf load: 1000 kg Illustration similar matching stands LA1/130/230, LA1/130/320 Dimensions: 1000 x 1350 x 70 mm

Heavy-duty shelving floor, pallet rack PAGUS Type: Badersleben floor without sheet metal cover Depth: approx. 900 mm width: approx. 1300 mm Shelf load: 1000 kg Illustration similar matching stands LA1/90/230, LA1/90/320 Dimensions: 1000 x 1350 x 55 mm

Heavy duty rack, pallet rack KÖGL Type: pull-out rack Order number: P87 0087036303-Z78 Shelf load: max. 10000 kg bay load: max. 4000 kg shelf width: 1520 mm, shelf height: 2000 mm, shelf depth: 950 mm 3 pull-out compartments ( height adjustable ) Compartment width: 1240 mm, compartment depth: 750 mm ( 800 mm without aluminium profile ) The heavy-duty shelf must be anchored in the floor ! used, checked ! Dimensions: 1520 x 950 x 2000 mm

Heavy-duty anchors, heavy-duty anchors, 100 pieces FISCHER SLM6N Article No. 50520 Article consists of 100 heavy-duty anchors ! New ! Dimensions( packaging ): 170 x 120 x 70 mm

Heavy Duty Wheel, Polyurethane Heavy Duty Wheel, PU Wheel, 2 Pieces WICKE No. 636 Wheel diameter: Ø 200 mm Wheel width: 50 mm for shaft diameter: Ø 25 mm Wavelength in wheel: 60 mm New Dimensions ( one wheel ): 200 x 200 x 60 mm Dimensions ( packaging ): 200 x 200 x 120 mm

Heavy-duty castor, polyurethane heavy-duty wheel, PU wheel Pagus wheel diameter: Ø 200 mm wheel width: 80 mm for shaft diameter: Ø 50 mm Shaft length in wheel: 88 mm New ! Dimensions: 200 x 200 x 88 mm

Heavy duty roller, polyurethane heavy duty wheel, PU wheel PAGUS wheel diameter: Ø 180 mm wheel width: 50 mm for shaft diameter: Ø 35 mm Shaft length in wheel: 50 mm groove width: 10 mm New Dimensions: 180 x 180 x 50 mm

Axles for heavy-duty trucks, steerable, 2 pieces PAGUS Track gauge: 1050 mm wheel diameter: Ø 290 mm wheel width: 75 mm drawbar length from pivot point: 500 mm drawbar cross-section: 120 x 50 mm ( U-profile ) used, tested ! dimensions ( towing axle ): 1230 x 700 x 300 mm Dimensions ( trailer axle ): 1230 x 330 x 300 mm Dimensions (transport, with pallet) ): 1230 x 800 x 300 mm

Axles for heavy-duty trucks, steerable, 2 pieces PAGUS Track gauge: 750 mm wheel diameter: Ø 290 mm wheel width: 75 mm drawbar length from pivot point: 500 mm drawbar cross-section: 120 x 50 mm ( U-profile ) used, tested ! dimensions ( towing axle ): 930 x 700 x 300 mm Dimensions ( trailing axle ): 930 x 330 x 300 mm Dimensions (transport, with pallet) ): 1200 x 800 x 300 mm

Heavy duty roller, polyurethane heavy duty wheel, PU wheel, 2 pieces ACLA Ø 125 x 40 wheel diameter: Ø 125 mm wheel width: 40 mm for shaft diameter: Ø 25 mm Wavelength in wheel: 50 mm New Dimensions ( one wheel ): 125 x 125 x 50 mm Dimensions ( packaging ): 125 x 125 x 100 mm

Heavy-duty transport chassis, armoured roller, heavy-duty roller PAGUS 210 x 100 x 82 mm Minimum height: 82 mm Support surface (bottom): 120 x 50 mm Support surface (machine): 100 x 80 mm mounting thread: M16 x 2.0 in steel plate Material thickness: 20 mm Number of individual rollers of the chain: 15 pieces Roll diameter: Ø 18 mm Roll length: 50 mm used, tested ! Dimensions: 210 x 100 x 82 mm

heavy-duty swivel castors PAGUS with parking brake wheel diameter: Ø 300 mm wheel width: 90 mm plate dimensions: 215 x 215 mm New Without brake S359 Dimensions: 400 x 400 x 340 mm Weight: 42 kg

Diameter: approx. 40 mm Width: approx. 180 mm smooth-running wheels/castors e.g. for ball mills or drying drums

heavy-duty swivel castors PAGUS wheel diameter: Ø 300 mm wheel width: 90 mm panel dimensions: 215 x 215 mm New ! Without brake S358 Dimensions: 400 x 320 x 340 mm Weight: 37.4 kg

Strong cutting torch ZIS, MWW ZIS485 Torch neck length: 0.7 m inclusive Nozzle set for cutting range: up to 300 mm Acetylene pressure: 0.5 bar Heating oxygen pressure: 2.0 bar New ! Dimensions: 1000 x 200 x 100 mm

Moving centering point, heavy duty grain tip ROTERBERG, WMW DREHMEISTER Type P TGL 30-2325 diameter : Ø 155 mm Grains diameter: Ø 64 mm inner diameter (receptacle): 135 / 127 x 102 mm (conical) used, tested ! Dimensions: 299 x 155 x 155 mm

Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons

Handling weight max. 400 kg, reach 9,000 mm, travel speed 3 m/sec., power 45 kW, weight 1,600 kg, drive fully hydraulic, was used for wall prefabrication, other plant components available, please contact us if you are interested.

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

Ref. -No.: 10154 Manufacturer: HEYLIGENSTAEDT Year of construction: 2014 Retrofit: 2015 Type of control: CNC Control: SINUMERIK 840D solution line Storage location: Halberstadt Country of origin: Deutschland Bed width: 2000 mm Feed rate: 1-5000 mm / min Turning Diameter: 2600 mm Turning Length: 10000 mm Centre Distance: 11500 mm Faceplate Diameter: 2000 mm Spindle Speeds: 0,5 - 36 min-1/20 - 140 min-1 RPM Max. Torque: 120 Nm Max. Workpiece Weight: 40000 - 70000 kg Total Power Requirement: 230 kW Cross slide shift (X-axis): 640 mm Further information:

Heavy Cardboard Bending Machine & Corner Protection Press Grooving machine AB: 1300 mm Groove width: 2-12 mm Additional function: Press in protective corners plus various protective corners !

Heavy current switch relay, heavy current switch relay -Manufacturer: Rutenbeck -Type: SAR Ap -Number: 1x relay available -Price: per piece -Dimensions: 65/80/H40 mm -Weight: 0.07 kg

Heavy duty castors, heavy duty wheels, tires, solid rubber tires -without: rubber coating -Payload: kg -Tire size: 350 x 155 mm -Mounting hole: 60 mm 2x with groove -Number: 4x bikes available -Price: per piece -Weight: 31 kg/piece

Short-stroke heavy-duty cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders -with external thread: M 90 x 2 -Piston: Ø 55 mm -Max. Stroke: 550 mm -max.: 700 bar

Platform trolley, transport trolley, heavy duty truck, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy duty trailer -Heavy-duty transport trolley: industrial trailer with 2-axle steering -Platform: 2500/1255/H490 mm -Load capacity: 11 t -Tires: solid rubber -Quantity: 4x transport trolleys available -Price per piece -Total dimensions: 4360/1255/H490 mm -Weight: 780 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Platform: 2500/1800/H740 mm -Load capacity: 30 tons -Steering: double -Total dimensions: 1800/4810/H740 mm -Weight: 1940kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle, industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1115/H610 mm, dimensions see photo techn. drawing -Stakes height: 1400 mm (welded) -Load capacity: max. 5000 kg -Tires: solid rubber -Transport dimensions.: 3620/1115/H1540 mm -Own weight: 440 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle, industrial trailer type DSL with 1-axle turntable steering -Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: solid rubber -Total dimensions: 3560/1000/H610 mm -Own weight: 300 kg