129,230 used machines on RESALE, but how to find them? Machine Search
90 m pallet rack Jungheinrich Heavy Duty New, very good condition, see pictures Height 5 m Depth 110 cm Beam length 3.7 m Load/compartment 3800 kg Load 18000 kg Frame blue Carrier white Year of construction 2023 Negotiation price: € 15.490,-- net from stock Offer consists of: + 25 pcs. frame pre-assembled, new, depth 110 cm, height 5 m + 144 pcs. carriers, used goods, length 3.7 m, 3800 kg ballast/compartment + 288 pcs. Suspension locks + 100 concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all price ...
2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...
Mepac heavy duty vertical bagging machine for bulk productions.
PELLIZZOLI HEAVY DUTY GRANULATOR, Heavy duty granulator for rubber and plastics, sturdy machine, very well constructed, 1.500 mm.wide rotor, Ø 800 mm - open rotor, powerful 132 kw drive, n.15 rotating new knives 50 mm.long + spare set, n.2 screens: holes 50 mm + 8 mm., machine prepared to be connected to a chiller to perform a thorough cooling, material sucking unit + dust sucking unit., This machine was new in 2005 but it has been working only 3 months on a pilot project., The machine is offered reconditoned, Complete with CE compliance, electrical drawings, manual., installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.500 mm. (59), conditions: fully reconditioned, type: heavy duty - open rotor for rubber and plastics
Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003
SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently
Offer up to 2 polyester heavy-duty slings from Certex. WLL: 40000kg EWL: 8.2m They are used, but in very good condition. No cuts, no cracks, blue shield completely present.
spindle diameter: 150 mm x-travel: 9500 mm y-travel: 2500 mm Control: Siemens type: 840 C ram: horizontal adjustment: 700 mm spindle travel: mm dimension of the ram: 400x400 mm Plate area: mm rotary table:: Table load: 25000 kg table travel: 2500 mm Table area: 2000x2500 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 160 mm x-travel: 10000 mm y-travel: 4500 mm w-axis: 1200 mm ram: horizontal adjustment: 1000 mm dimension of the ram: 400x400 mm control: Heidenhain TNC430 spindle taper ISO: 50 turning speeds: 700/1000 U/min Radial face slide: 800 mm vertical head: ISO 50 angular milling head: Rotary table: 2500x3000 mm table load: max 40 t Plate area: 50400 m² Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. T ...
Manufacturer: Morn Laser Type of Machine : HEAVY DUTY TUBE LASER CUTTING MACHINE Conditon : New Models: MT-6000 / MT-9000 / MT-12000 X Series & L Series Advantages: - Intelligent 4-chuck technology - Truly zero tailing - Auto loading and unloading system Parameters: - Laser Power: 1500W – 20000W - Tube Diameter: Ø20mm–160mm / 200mm / 350mm / 500mm - Tube Length: Standard 6m / 9m / 12m Find more here - / Contact us at -
- Travelling wheel machine with CROWNING and CONCAVING grinding - Equipped with stones / flanches / lubrication / coolant system - Maximum diameter full size wheel 1550 mm - Work swing over bed 1580 mm - Work load 180.000 pounds (81.000 Kg) - Grinding length 7500 mm
spindle diameter: 150 mm x-travel: 14300 mm y-travel: 4100 mm : 1000 mm : 2500 mm : 900 mm : ISO 50 : 5,5 - 1000 U/min : 55 kW : 4000 x 3500 mm : 60 t control: Fagor 8055 total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - Fagor 8055 CNC control - CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t - Coolant system (external) - Telescopic covers for the guideways - Operator platform attached to the spindle box - Plate field 2x 6000 x 2000 mm each The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HEAVY DUTY SINGLE SHAFT SHREDDER - multipurpose, Main applications:TYRES - CABLES - WEEE - LIGHT METAL SCRAPS - OIL FILTERS, and other industrial waste, Rotor length: 1,200 mm, Rotor diameter: approx. 500 mm, rotor speed 144 rpm, Cutting chamber opening: 600 x 1.200 mm, 30 rotating blades, 16 fixed blades, Installed power: 1 x 132 Kw IE3 (belt drive), Siemens (PLC and control equipment), Schneider Electric (protections, switches and power supply), Omron (sensors and auxiliary modules), Power supply voltage: 3~ 400 V – 50 Hz, screen holes bespoke to project, Robust structure with interchangeable internal armour plating in wear-resistant steel., High-inertia rotor designed to minimise wear and optimise cutting power., Blades can be resharpened several times, Quick blade and grid replacement system with easy access., Hydraulically opening grid cradle for easy maintenance and grid replacem ...
12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm
Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), l ...
Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting t ...
GE Fuel Oil Filter PN: WE021222 Drawing Number: 84A220402P9 4 units
Juice mixer, juice mixing plant. Fruit juice bottling Beverage mixing plant used. Manufacturer: Füllpack GmbH (Gea Group) Model: Fuellmix-MB Elo Filling Mix MB PLC S7 and Monitor Visualization Fuellpack Mixer 2 / Mixing plant 2 Power approx. 7000 - 15000 l/h Including Fischer-Porter flow meter; Valves, pumps, Panel Documents available Dimensions 2800 x 2100 x 2100 mm
Key data: 4 KW, 230 V
Inverter generator set 4 kW - NEW DUAL Fuel - Gasoline / Gas - Power: 4 kW (petrol operation) - Power: 3.8 kW (gas operation) - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 1.5 liters/hour (50% load) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 48 kg - Socket: 2x 230V Schuko - USB port / socket - 12V socket for charging the battery - ATS connection - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - Digital display (volts / hertz / hours / kW) ---> 2 identical inverters can be connected and synchronized to obtain a total output of 8 kW. - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems ...
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 19560 KW, 11000 V
Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...
General SKU213P158 LocationBarneveld MakeFUELLPACK Maschinenbau (DE) Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter650 mm Specified Features - Deaerators Vacuum de-aeratorcheck Capacity50000 Ltr/h Vessel capacity(2X) 500 Ltr Vessel diameterdia.650mm Cylindrical height1500mm With vacuum pumpwaterring, 33 mbar Motor11 KW, 400 Volt With product pump/ (2x) Condensate pump 43 m3/h Motor18,5 KW, 380 Volt Information TypeONEX V/V Number2210040914 Year of construction1992 Mounted on framecheck With switchgearcheck Extra Specificationswater inlet DN100, water outlet DN100, raw water inlet 1 :DeaeratorsFuellpackDe-aerators > DeaeratorsBrand > Fuellpack What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...
Neumaschine / NEW machine - UNUSED Genie factory warranty Internal number 5523 Auction-ID: A1-44982-12
Tanks fuel tank fuel tank storage tanks 5 cbm TAnkstelle diesel tank Gas station fuel tank tank tank heating oil tank storage tank 5,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.70 m + console / D = 1.60 m / weight CA. 1.6 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on customer's request, ...
Diesel tank, storage tank, service station, tank plant, steel tank, storage tank with 10,000 litres of content according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 500 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed and painted on the outside. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 tons. / ex works, freely charged. General: You will r ...
Tanks fuel tank fuel tank storage containers 50 cbm TAnkstelle diesel tank TAnkstelle diesel tank tank tank heating oil tank storage tank 50.000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube, 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = approx. 10.70 m + console / D = 2.50 m / weight CA. 9 tons. / free charged ex works. On the tank, a pump / nozzle pump is installed on custome ...
maximum number of results exceeded
please refine your search
100 € 
