heavy fuel used for sale

Heavy-duty transport vehicle, 15 tons, with electric tractor, pedestrian, Master Mover MT 1500, manoeuvrable electric pulling aid for slats up to 15 tons. –used-: Price together from location: only 9.950.-€ (net). Trolley: Manufacturer: AMS Transport Systems Type: A-MM 15T Year of Make: 2017 Load capacity: 15,000kg Weight: 1.250kg Max. speed: 6km/h Metrics: Electric tow tractor Manufacturer: Master Mover Type: MT 1500 Year of Make: 2017 Load capacity: 15,000kg Weight: 1.250kg Max. speed: 6km/h Metrics: Foot protection on the castors Hydraulic weight transfer AC drive Condition: good Available: immediately Location: 88448 Attenweiler

Offer 21377 Technical data approx.: - 21 storage levels / compartments with inserts - 18 x compartment height approx. 100 mm - 3 x compartment height approx. 150 mm - Compartment – total width inside 1380 mm - Compartment – total length 2600 mm - Space requirement W 1500 x D 2600 x H 3480 mm - Transport height folded 2600 mm

Offer 22459 Technical data approx.: - 13 storage levels / compartments with inserts - 11 x compartment height approx. 100 mm - 2 x compartment height approx. 150 mm - Compartment – total width inside 1380 mm - Compartment – total length 2600 mm - Space requirement W 1500 x D 2600 x H 2350 mm

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Key data: 1400 , 1000 , 11280

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW

300 Heavy Duty Grating 48 x 133 cm Used goods, very good condition, see pictures Hot-dip galvanized Weight load: approx. 450 kg/m² Dimensions: 480 x 1330 mm Mesh size: 20 x 30 mm Bearing rod height: 45 mm Material thickness bearing rod: 3 mm Negotiation price: € 30,-- net per piece from stock Larger quantities on request! Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Key data: 3200 mm, 2500 mm, 14000 mm

The lathe model 1682A is designed for roughing and finishing work on cast iron or steel parts weighing up to 170 tons. Production year 60’ and complete retrofited in 2011 The largest workpiece dimension above the support is 2500 mm. Parts can be machined using both high-speed steel and carbide-tipped cutters. The machine can be used for turning external surfaces, boring, facing and parting, and turning various cones, radii, and chamfers. The machine is equipped with a Balt-System NC-310/3 CNC system and separate drives for the Z, R, X, U, W, and Q coordinates, enabling the machining of complex surfaces (fill Based on the technical documentation provided, here is a translation and summary of the 1682A Heavy-Duty Lathespecifications, organized by category for better clarity: 1. General Machine Dimensions & Capacity This is a massive industrial lathe designed for exceptionally la ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1045 mm -Width: 14 mm/height: 39 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg/piece

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 105 mm, 2 pieces -Inside: Ø approx. 25 mm -Price: complete -Weight: 2 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Jungheinrich, forklift drive wheel -Wheel size: Ø 310 x 105 mm -Pitch circle: Ø 113/18 mm -Weight: 13.2 kg

Specifications: height of tips on the bench 700mm Height of tips on carriage 520mm Distance between closed bench centers 4,000mm Distance between drills with extended bench 6,000mm Extended Bench Drill Height 1,100mm mobile bed stroke 2,000mm 150mm bar passage various accessories available (plateau, chuck, steady rests, tailstocks,...) Supplied machine books 2-axis dimension display MACHINE IN EXCELLENT CONDITION

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Wicke- Elastic heavy duty bike -Wheel size: Ø 270/105-225 mm -Hole circle: Ø 188/9 mm -Price: per piece -Number: 1 piece -Weight: 8.9 kg/piece

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1127 mm -Width: 14 mm/height: 58 mm -Price: per pair (left right) -Weight: 2.9 kg

SPECIFICATIONS: 06 columns height: 2500 mm - base 800 mm 012 Truss length: 1000 mm

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1140 mm -Width: 14 mm/height: 59 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.45 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

heavy-duty castors, heavy-duty wheels, tires, forklift drive wheels -Manufacturer: Wicke- Topthane heavy-duty wheel -Wheel size: Ø 230 x 90 mm -Bolt circle: Ø 95/13 mm -Price: per piece -Quantity: 2 pieces -Weight: 7.5 kg/piece

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 785 mm -Width: 15 mm/height: 42 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 2.2 kg

Key data: 1250 mm, 900 mm, 8000 mm

The largest diameter of the processed product in mm: above the bed 1250 above the caliper 900 Distance between centers in mm 8300 The largest weight of the installed product in kg is 30,000 The number of spindle speeds is 3 The limits of the number of revolutions of the spindle in minutes are 3.15—200 Number of pitches: longitudinal 18 transverse 18 Feed limits in mm/rev: longitudinal 0.16-8 transverse 0.1-5 Number of calipers 2 The angle of rotation of the upper part of the caliper is ±90 degrees The power of the main electric motor is 60 kW Dimensions of the machine (length X width X height) in mm 15200X2500X2060 Weight 53.4 tons

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Jungheinrich, roller -Wheel size: Ø 85 x 75 mm -Inside: Ø approx. 25.2 mm -Price: per piece -Number: 3 piece -Weight: 1.1 kg/piece

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, caster, pallet truck castors -Manufacturer: Wheels-Vogel, heavy-duty bike -Wheel size: Ø 85 x 100 mm -Inside: Ø approx. 25.5 mm -Weight: 1.3 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 820 mm -Width: 15 mm/height: 58 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 1.8 kg

Heavy-duty shelving stand, pallet rack PAGUS type: Badersleben stand depth: approx. 1300 mm height: approx. 2300 mm shelf load: 1000 kg image similar suitable floors LA1B/130/90, LA1B130/110 Dimensions: 1350 x 100 x 2300 mm

We offer for sale a complete set of Indutec industrial shredder model PM16/3, equipped with all its original components and accessories, ideal for intensive industrial use in the sectors of recycling, material shredding or industrial processing. ✅ General Features: Model: Indutec PM16/3 Type: Heavy Industrial Shredder, High Power Condition: Excellent condition, complete, with accessories and spare parts Total weight: Approximately 47,500 kg divided into two containers + base Composition of the set (ready to operate): First container – N° 128790 – 13,000 kg Engine: WEG 315 S/M – 150 kW – Gearbox: FLENDER B3 SV 11A – 118 kW – Pump: Neuman & Esser CCS 6-M – 0.25 kW – Neuman & Esser clocks: 1.1, 1.2, 1.3, 1.4 Separator Gasket Lubrication tank Mill flange Spare parts set: blade holder, bevel gear, pendulum shaft, body and heads, bolts Second containe ...

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, swivel castor, track roller, pallet truck rollers -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 80 mm -Inside: Ø approx. 20.3 mm -Price per piece -Quantity: 1 piece -Weight: 1.4kg

Heavy-duty shelving stand, pallet rack PAGUS type: Badersleben stand depth: approx. 1300 mm height: approx. 3200 mm shelf load: 1000 kg Image similar suitable floors LA1B/130/90, LA1B130/110 Dimensions: 1350 x 100 x 3200 mm

Key data: 500 KG, 2800 mm, 2500 mm

3 ladders 3 shelves 6 steel panels 1100 mm deep

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Manufacturer: Wicke- Topthane, roller -Wheel size: Ø 85 x 85 mm -Inside: Ø approx. 11 mm -Price: per piece -Number: 3 piece -Weight: 1.5 kg/piece

Heavy duty castors, heavy duty wheel, tires, forklift drive wheel, swivel castor, caster, pallet truck castors -Caster: Ø 85 x 80 mm -Inside: Ø approx. 17 mm -Price: per piece -Number: 4 piece -Weight: 1.5 kg/piece

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg

Heavy-duty shelving stand, pallet rack PAGUS type: Badersleben stand depth: approx. 900 mm height: approx. 2300 mm shelf load: 1000 kg Image similar to suitable floors LA1B/90/130o Dimensions: 1050 x 100 x 2300 mm

Key data: 500 KG, 2800 mm, 2500 mm

2 ladders 3 shelves 6 steel panels 1100mm deep

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 940 mm -Width: 13 mm -Height: 54 mm -Price: per pair (left right) -Number: 4x pairs available -Weight: 1.95 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

Heavy Duty Rack Stand, Pallet Rack PAGUS Type: Badersleben Stand Depth: approx. 900 mm Height: approx. 3200 mm Shelf Load: 1000 kg Image similar suitable floors LA1B/90/130o Dimensions: 1050 x 100 x 3200 mm

Key data: 500 KG, 2800 mm, 2500 mm

2 ladders 4 shelves 6 steel panels per shelf 1100 mm deep

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Surface: PU -Wheel size: O 170 x 75 mm -Inside: O 55 mm -Inside: O 85 mm cone -Price per piece -Quantity: 2 pieces -Weight: 7.3kg/pcs

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Industrial trailer with 1-axle turntable steering -Platform: 1980 x 785 mm -Load capacity: 4 t -Tires: solid rubber -Dimensions: 3650/790/H505mm -Weight: 383 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 700 mm -Length extended: 1290 mm -Width: 13 mm/height: 24 mm -Price: per pair (left right) -Number: 26x pairs available -Weight: 1.8 kg

Heavy Duty Shelf Floor, Pallet Rack PAGUS Type: Badersleben Floor Depth: approx. 1300 mm Width: approx. 1100 mm Shelf Load: 1000 kg Image similar to suitable stand LA1/130/230, LA1/130/320 Dimensions: 1350 x 1100 x 70 mm

Key data: 1350 KG, 2800 mm, 2250 mm

2 ladders 3 shelves 6 steel panels per floor 1100mm deep

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 700 mm -Length extended: 1280 mm -Width: 14 mm -Height: 38 mm -Price: per pair (left right) -Number: 5x pairs available -Weight: 1.8 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 14 mm -Height: 55 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

Heavy Duty Shelf Floor, Pallet Rack PAGUS Type: Badersleben Floor Depth: approx. 1300 mm Width: approx. 900 mm Shelf Load: 1000 kg Image similar suitable stand LA1/130/230, LA1/130/320 Dimensions: 1000 x 1350 x 70 mm

: 20000 kg length: 6000 mm width: 2450 mm height: 697 mm : lenkbar : lenkbar size of tyres: 450 x 300 weight of the machine ca.: 2,8 t dimensions of the machine ca.: 7,2 x 2,5 x 0,7 mm Heavy load trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - reversible drawbar, Length 1320mm - 50mm impregnated wood overlay. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.