heated used for sale

Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface

AIR PELLETIZER FOR PVC AND COMPOUNDS for throughput 500 to 1500 kg/h connection flange built on Clients design made in steel heated by ceramic heaters, temperature probe and protection carter, stainless steel granulation chamber on horizontal axix, quick opening, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a spring which keeps knives pressed, with less wearing out and increased efficiency n.1x 3 kw motorwith extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw blower, Venturi system, knife template, electric cabinet and touch screen control board with modem for remote assistance

Key data: 4850 kN, 1200 mm

Two-piston press 1200 x 800 Heating plates 1200 x 1200 mm Clamping force approx. 4850 kN electrically heated

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Size: 760x 1140 mm Equipments: utomatic separator automatic pile suction feeder fully automatic sheet stacker sheet weight from 135 – 600 gsm, speed up to 10,000 sph Thermal laminating machine electrically heated laminating roller (without water or oil)

Manufacturer: Bürkle , Type: Düsentrockner, Year: 2001, Length mm: 15000, Channel length in mm: 10000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: 60, Kanaltemperatur Grad: 120, Umluftleistung m³/h: 25000, Mischluftleistung m³/h: 27500, Abluftleistung m³/h: 2500, Raumluft m³/h: 2500, Abluftventilator kw: 0,5, Mischluftventilator kw: 15, Ex geschützt: no, Gesamthöhe mm : 3200, Conveyor lenght mm: 16000, Through running hight mm: 80, Feedin speed m/min: 5-25, Rod transportation: yes, Air speed in jets: 25 m/sec, Flat spray nozzle: yes, Max. air temperature: 120, Heated by: Thermoiol, 1st Damper register kW: 172, Year :2001

Manufacturer: Bürkle, Type: Düsentrockner, Year: 2001, Work piece width min-max mm: 1300, Channel length in mm: 6000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 120, Umluftleistung m³/h: 11000, Mischluftleistung m³/h: 11000, Abluftleistung m³/h: 2500, Abluftventilator kw: 7,5, Ex geschützt: no, Gesamthöhe mm : ca.3000, Temperature regulation: yes, Druckdifferrenzschalter: yes, Conveyor lenght mm: 8000, Through running hight mm: 80, Feedin speed m/min: 5-25, Rod transportation: yes, Air speed in jets: 25 m/sec, Flat spray nozzle: yes, Max. air temperature: 120, Heated by: Thermoil, Damper register - items: 1, Year :2001

Manufacturer: Secotherm, Year: 2000, Control: Secotronik BM, Number of chambers: 9, Fans per chamber: 1-3: five ventilators, 3-9: two ventilators, kW-Leistung pro Ventilator: 3, Gross chamber volume m³: 1524,6, Kammervolumen mit Holz : ca. 945, net m³: ca. 378, Heated by: Water, Temperature °C: 92-110, System dismantled: yes, Space required: 55x8 = 440 m2, Year :2000

Manufacturer: Baberan, Type: LP 1400, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 10-60, Feeding speed min-max m/min: 10-40, Destacking plant: no, Stacking plant: no, Brushing machine: yes, Casein glue plant: yes, Brushing machine: yes, Roller diameter mm: ca.400, Lamination calender: yes, Press calender: yes, Roller diameter mm: ca.400, Rollers heated: yes, Heating medium thermal oil: yes, at top and bottom: yes,

Manufacturer: Sergiani Querdurchlaufpresse Warmwasser, Type: GSA, Year: 2009, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3500 X 1300, Number of storeys: 1, Cylinder stroke: 350, Charging side: Quer, Landing opening mm: ca.350, Steel heating plates: yes, Min-max temperature: 0-120, Heated by: Warmwasser, Overall pressure kN: ca.4 kg²cm, Press length mm: 3500, Pressing width mm: 1300, Transport roller conveyor: yes, Thermoilpumpenstattion: yes, Lateral press: yes, Belt conveyor: yes, Year :2009

Manufacturer: Bürkle, Type: U110 , Year: 1990, Stages: 3, Lateral press: yes, Heizplattenmasse ca.mm: 3000x1300, Anzahl der Etagen: 3, Zylinderhub mm: ca.400, Beschickungsseite: längs, Landing opening mm: ca.100, Heizplatten aus Stahl: Stahl-Aluminium, Temperatur min-max: 150, Heated by: Warmwasser, Gesamtdruck KN: 1100, Anzahl der Presszylinder: 8, Time switch: yes, Press length mm: 3000, Pressing width mm: 1300, Year :1990

Manufacturer: Rippert, Type: Düsentrockner, Work piece width min-max mm: 1300, Channel length in mm: 14000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: max.80, Ex geschützt: yes, Gesamthöhe mm : 2500, Temperature regulation: yes, Druckdifferrenzschalter: yes, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Working height in mm: +/-950, Conveyor lenght mm: 14500, Through running hight mm: 100, Feedin speed m/min: 5-15, Belt conveyor: yes, Air speed in jets: ca.20, Round nozzle: yes, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.70,

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

1x CIP station ‐ 3100L Tanks ‐ 1 tank of which heated 8kw ‐ Temperature control ‐ incl. sanitary pump

Manufacturer: Baberan Kaschieranlage, Type: ECO Line 1400 DSI, Year: 2006, Work piece width min-max mm: 250-1350, Min.-max. workpiece length in mm: 450, Min.-max. workpiece height in mm: 6-40, Working widht max mm: 1350, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Urea plant: yes, Brushing machine: yes, IR zone: yes, Hardener machine: yes, Leimauftragsmaschine : 2, Double-sided: yes, Roller diameter mm: ca.300, Lamination calender: 2 Stück, Diameter of lamination calender in mm: ca.400, Roller diameter mm: ca.300, Rollers heated: yes, Year :2006

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

Manufacturer: Venyeskob, Type: Düsentrockner, Year: 11.97, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Length mm: ca 13.000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: ca.60, Abluftventilator kW: ca.5, Ex geschützt: yes, Gesamthöhe mm : 2800, Temperature regulation: yes, Min.-max. workpiece height in mm: 3-80, Feedin speed m/min: 6-30, Belt conveyor: yes, Max. air temperature: 60, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.80, Year :11.97

Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995

Manufacturer: Italpress, Type: GL 260 PS 5, Stages: 1, Lateral press: yes, Anzahl der Etagen: 1, Zylinderhub mm: 450, Beschickungsseite: Quer, Heizplatten aus Stahl: yes, Heated by: Elektro, Spezifischer Druck: 700 Tonnen, Anzahl der Presszylinder: 5/Durchmesser 300 mm, Schliessgeschwindigkeit mm./Sek: 2 Stufig, Press length mm: 1600, Pressing width mm: ca.600, Press power kg /cm²: 40-50,

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

Manufacturer: Italpress, Type: Mark/C, Year: 2000, Program: yes, Control: Siemens, Longitudinal through running press: yes, Stages: 1, Press length mm: 3400, Pressing width mm: 1200, Press power kg /cm²: 6, Zylinder: 8, Inlet conveyor: yes, Warm water heated: yes, Work piece thickness max mm: 100, Through running machine: yes, Belt conveyor: Auslauf, Year :2000

Item condition: Top maintained Availability: as of now 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control co ...

Manufacturer: Bürkle Folienschutzkaschieranlage, Type: Kaschieranlage , Work piece width min-max mm: 400-1300, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Feeding speed min-max m/min: 5-30, Rollers heated: yes, Roller heating: yes, FREE TEXT: inkl.Transporbänder und Hebekran,

Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge -Screw was designed for a heating plant to discharge the ashes and was not yet in use -Screw tube and screw are double-walled and can therefore be cooled or heated -Execution: stable -Inlet: 1380 x 340 mm -Spout and control flange: Ø 360 mm -Screw and body made of: 30W02/3 -without motor -Screw diameter: 300 mm -Diameter screw tube: 220 mm -Length of screw: approx. 7600 mm -Infeed pitch screw: 55 mm -Outlet slope auger: 215 mm -Dimensions: 9050/610/H1100 -Weight: 2600 kg

Manufacturer: Itallpress, Type: GL 120, Stages: 1, Heizplattenmasse ca.mm: 500 X 1200, Anzahl der Etagen: 1, Zylinderhub mm: 310, Beschickungsseite: quer, Landing opening mm: 320, Heizplatten aus Stahl: yes, Temperatur min-max: ca.140, Heated by: Elektro, Spezifischer Druck: 400 Tonnen, Press length mm: 1200, Pressing width mm: 500, Number of cylinders: 4 /Durchmesser 150, Zykluszeit mm: 320, FREE TEXT: Verlademasse 1200 X 2100 X 2870 mit Ölbehälter 24000 ohne Behälter/Hydraulik Kw 5,5,

Manufacturer: Hymmen , Type: Kaschieranlage, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1350, Working width min min mm: 300, Feeding speed min-max m/min: 10-40, Brushing machine: yes, Casein glue plant: yes, IR zone: yes, Leimauftragsmaschine : yes, Double-sided: yes, Lamination calender: yes, Diameter of lamination calender in mm: ca.500, Press calender: yes, Rollers heated: yes, Heating medium thermal oil: yes, at top and bottom: yes, Automatical glue supply: yes,

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -Manufacturer: Homag -Heating basin with roll length: 120 mm -Execution: electrically heated -Number: 1x glue basin available -Price: per piece -Dimensions: 700/620/H300 mm -Weight: 44 kg/piece

Drying oven, drying cabinet, electrode re-drying, electrode cabinet, electrode dryer -Power: 0.2 kW -max temperature 110° C -electrically heated -Steel lining -Weight: 7 kg -Number: several dryers available -Price per piece

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Agitator tank, agitator tank, agitator tank, agitator tank, silo system, transport silo, tank, fertilizer storage silo, melting tank, melting tank -Material: stainless steel -Bracket: for agitator -Content of the tank: 1.3 m3 -Inside diameter tank: 1230 mm -Interior height tank: 1120 mm -double-walled container: can be cooled or heated -Equipment: spout below, on feet, with agitator holder (without agitator) -Transport dimensions: 1280/1300 / H2100 mm -Weight: 430 kg

Drying oven, drying cabinet, electrode re-drying, electrode cabinet -Drying oven: with isolating transformer -electric: heated -Steel lining -Interior dimensions: 100 x 420 mm -Number: 3x ovens available -Price: per piece -Dimensions furnace: 170/190/H570 mm -Dimensions transformer: 330/220/H360 mm -Weight: 14 kg/piece

Front Cooking Regio – Station Rieber RST-11, 230 V, 96x72x139 cm Food dispenser, 230V, 3 kW, 16 A, up to 170°C, keep warm, regenerate, heated cover, light, thermal bridge, tray slide, tray rack with 8 x 1/1 GN inserts, adjustable sneeze guard glass, mobile, 2 locking wheels, original price 10782,00 €

Cooking and smoking system Kerres JET SMOKE RET-2250 Electrically heated Microprocessor control Integrated wood chip smoke generator in the door Dimensions approx. 168 x 107 x 250 cm Power 29 kW Operating voltage 400 V / 50 Hz

Yizumi Injection Press Model: YL2-V280L Clamping force 2800 kN Volume: 2000cc Mold open stroke 500mm Min. mold height 100mm Heated platen size 670mm x 780mm Heating plate daylight 600mm Injection pressure 1970 bar Theoretical Injection volume 2000cm3 Oil pump power 11kW System pressure 230 bar Total power 37kW Power supply: 415V, 50Hz, 3P+N+PE Rexroth variable pump + Inovance servo motor: Year 2021 CE marked

Korimat KA 160 autoclave, 120 litres, 2.5 bar, MC control, autoclave for sterilisation with core temperature measurement, as a pressure pressure cooker for cooking meat, vegetables, soups and ready meals, electrically heated, circular marbled surface.

For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

Automatic EPS pre-expander This listing includes : 1. Automatic EPS batch type Pre-Expander - Density:7~30kg/m3 - Touch Screen Panel –SCHNEIDER - PLC System –SCHNEIDER - Screw Conveyor and Fluid Drying Bed Model: PSF90 Barrel Diameter: 900mm Effective Volume: 0.6M³ Steam Pressure: 0.4-0.5Mpa Compressed Air Pressure: 0.6-0.8Mpa Production Capacity: 10g/l=100kg/h, 15g/l=200kg/h, 20g/l=330kg/h, 30g/l=400kg/h Foaming Density: 8-30KgKg/m³ Density Tolerance: ≤3% Installed Power: 4.5kw External Dimensions: 1600 x 1900 x 2500mm Installed Weight: 1000kg Other Features : - Chromeplate makes non-adhesion of the bearing. - The solid bearing is made of heated steel. - The heating treatment bring the steel a high strength, non-deformation and high resistance to the expansive force from high-density products. - Density:7~30kg/m3 - Density tolerance: no more than 5%  ...

Heated - Cooled Reactor with a liquid volume of 12.000 liters. Our reactor has been used very little and is jacketed on the outside. Feet and stainless pressure pipe, stainless raw material addition funnel will be given together. Its engine is 22 kW and it is GAMAK brand. The reducer is German made Flender Motox brand. The cambers are 8.5 mm, the body is 6 mm thick. Jacket thickness is 5.8 mm. Produced by Şenlikoğlu Inoks in 1997, it was used for 2-3 years and then kept idle. This machine is one of the machines in my plant, actually I built my entire plant by spending over 200,000 USD. I want to continue the business by selling 1 machine in it. I really dont know the price of a single reactor as I bought the complete plant. But if I cant sell 1 reactor, I will sell the entire plant.

Clearing width approx. 90 cm, headlights, switchable heated handles, 220 V starting system if necessary, mint condition