heat used for sale

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.

Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.

Fuel tank heating oil reservoirs for oil storage tank diesel storage tanks 40,000 Litres according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = 8.70 m / D = 2.50 m / weight CA. 7.5 tons. / free charged ex works.

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 22,500 litre pressure vessel. This is a 22.5 cbm pressure vessel made of steel from the lined with an inner coating. Material S235JRG2 Steel . Container dimensions: Length : approx. 6,100 mm diameter: approx. 2,300 mm weight: approx. 5,500 kg Pressure: 10 Bar Shape: cylindrical ---------------------------------------------------------------------- --------------------- Of course, you can also help shape your tank system! All our systems are used in our company by selected employees extensively checked and checked. We also offer an inexpensive delivery on request. It is possible to  ...

GEA Ahlborn plate heaters used

Full stainless steel heat exchanger in round shape. Previous use: heating air with steam. Suitable for heating or cooling aggressive gases/air.

Heating power: 18.5 kW maximum temperature: 350 ° C maximum capacity: 15 ltr. 380 V / 60 Hz

Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...

Piec Merrychef eikon® e2s jest doskonałym wyborem dla każdego, kto chce przygotować świeże, gorące posiłki na żądanie, gdzie wolna przestrzeń jest na wagę złota. Jest to najmniejsza jednostka oferująca najlepsze wyniki przyczyniające się do usprawnienia wszystkich czynności kuchennych. Piec jest łatwy w obsłudze, wszechstronny i zapewnia stały i wysoki poziom wydajności, który nieustannie wykracza poza oczekiwania. Piec jest dostępny jako eikon® e2s Classic w tradycyjnym wzornictwie Merrychef lub jako eikon® e2s Trend, z kolorową obudową na zewnątrz, łagodnymi krawędziami i miejscem na przechowywanie drobnych rzeczy na górze. Piec eikon® e2s jest idealnym sposobem gotowania, tostowania, grillowania, pieczenia i podgrzewania świeżych lub mrożonych produktów, takich jak kanapki, ciasta, pizza, ryby, warzywa i mięsa. Taka elastyczność wpływa poz ...

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

Laboratory heating press REITZ EHSP5H – used demonstration machine Heating press with pressing pressure 5 KN (0.5 tons) With heating device up to 200 °C from above and below. - Electric screw press press press force 5 KN (0.5 to) - Screw jack with spindle 20 mm, pitch 5 mm - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per revolution - Clear width approx. 60 mm - Pressing area 100150mm - Heating device with temperature control, 2 heating plates 100 x 150 mm - With TECO electric motor 0.18 KW - With reversing contactor control (up – down buttons) and emergency stop - Motor protection plug against overload, with main switch - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 100 kg . Suitable for foil bonding and embossing. Due to self-locking of the spindle, long holding time with constant pressure. The scr ...

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Supply air heating system, NW250, 400V, 9KW, KMS, mint condition -80% Special price ! The current new price of a similar product is more than € 8,000 excluding VAT. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Top condition like a demonstration unit! The part was removed from a new machine that has demonstrably only run for approx. 100 operating hours. Technical data: - Supply air heater 9 KW - Heating cartridge with heating cross 400V 3x3000W - Incl. pipework, complete design in stainless steel + pipe insulation - Incl. corrugated flex sleeves - Stainless steel intermediate non-return valve AWS ZRK-VA-VA-200-F - Assembled incl. stainless steel mounting bracket - Price is without HEPA filter and Ex centrifugal fan, we are happy to offer - Parts list and drawing from KMS - Inlet side NW250 - Outlet side NW250 reduce ...

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modula ...

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

The 30-40 KW Vaillant heat pump was an exhibit and ran for only a few hours - quasi-new! It is fully functional, max. energy efficient (A+) and suitable for all heat sources between -6 and 20 °C The VWS400 brine/water heat pump is intended as a heat generator for closed heating systems. Special features: – Flow temperature up to 65 °C for modernization and high hot water comfort – High efficiency thanks to modern, durable heat pump scroll compressor – Bivalent alternative or parallel operation possible – Increased living comfort in summer thanks to integrated cooling function (passive) – SG Ready and PV Ready – suitable for heating and hot water preparation – Up to 16 heating circuits possible thanks to integrated controller (with other accessories) Equipment: – Control for electric auxiliary heating up to 8.8 kW integrated – Sound decoupling of the  ...

Heating capacity: 10,5 kW Max. Temperature: 350 ° C maximum capacity: 12 ltr. 380 V / 50 Hz protection class IP 54. Pressure vessels: 9 kW 12 bar 4.2 ltr. Max. Operating temperature: 350 ° C Minimum flow rate: 0,4 m³ / h

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Luchs Monoblock Heat Pump 6 kW with R290 – Your Sustainable Heating Solution for Every Home Are you looking for an eco-friendly heating solution that is both efficient and modern? Then the Luchs monobloc air-to-water heat pump with 6 kW is just right for you! This innovative heat pump not only offers a sustainable way to heat, cool and heat water, but also uses the natural refrigerant R290, which meets the highest environmental standards. Why should you choose Luchs heat pumps? Our heat pumps are manufactured in Poland under strict European quality and safety guidelines. For you, this means: short delivery routes, first-class workmanship and a future-proof investment in your home. With Luchs, you are choosing a reliable and sustainable heating solution that will give you pleasure in the long term. Easy installation and comprehensive equipment The Monoblock heat pump is s ...

Discover the LWP 45 E/S air-to-water heat pump from Luchs Wärmepumpen – your environmentally friendly solution for heating, cooling and hot water preparation. With an impressive heating capacity of up to 11.4 kW and the sustainable refrigerant R290 (propane), this unit not only offers the highest efficiency, but also meets all current European standards. High-quality European production Our heat pumps are manufactured in Poland, which stands for first-class quality and short delivery routes. You can rest assured that it complies with all EU safety and quality standards, so you get a product that is both reliable and durable. Fully equipped for easy installation The LWP 45 E/S comes fully equipped at the factory, including all essential components and an integrated circulation pump. This allows for effortless integration into existing heating systems without the need for ad ...

Discover the Luchs Monobloc LWP 59 E/S heat pump – your sustainable heating solution for a comfortable home Are you looking for a smart and environmentally friendly heating solution? The Luchs Monobloc heat pump LWP 59 E/S is exactly what you need! With its natural refrigerant R290, this heat pump meets the highest environmental standards while ensuring impressive energy efficiency. In this way, you can not only heat your home comfortably, but also actively contribute to the protection of our planet. High-quality production from Poland for the highest quality The Luchs heat pump is manufactured in Poland according to strict European quality and safety standards. This careful manufacturing guarantees you a durable and reliable product. In addition, you benefit from short delivery routes, so you can receive your new heat pump quickly and easily. Easy integration into your exi ...

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

heat holder - Alfa Laval - technical data (see also:) 750 litre/h Content: 7.31 ltr. average length: 19371 mm Diameter: 22 mm

Discover the LWP 72 E/S air-to-water heat pump from Luchs – your perfect heating solution for a comfortable home! With an impressive power rating of 12 kW, the LWP 72 E/S is ideal for single-family homes with high energy requirements or smaller apartment buildings. Whether you want to heat, cool or prepare hot water, this compact device offers you everything you need. Environmentally friendly and efficient The LWP 72 E/S uses the environmentally friendly refrigerant R290 (propane), which meets the highest European environmental standards. With an energy efficiency class of A+ at 35 °C and A at 55 °C, you can be sure that you are not only environmentally conscious, but also cost-efficient. High-quality European manufacturing Manufactured in Poland under strict quality and safety guidelines, the LWP 72 E/S guarantees durable technology and reliable product quality. Thank ...

Discover the LWP 88 E/S air-to-water heat pump from Luchs – your perfect heating solution for medium to large buildings! Are you looking for an efficient and flexible heating and cooling option for your home? The LWP 88 E/S air-to-water heat pump from Luchs is exactly what you need. With an impressive power rating of 14 kW, this powerful device is ideal for single-family homes with high heat requirements or smaller apartment buildings. Environmentally friendly and efficient An outstanding feature of the LWP 88 E/S is the natural refrigerant R290 (propane). This environmentally friendly refrigerant not only ensures excellent efficiency, but also meets the latest European environmental standards. So you can be sure that you are choosing a sustainable heating solution that is both environmentally friendly and reduces your energy costs. Quality from Poland Our heat pumps are ...

Luchs LWP 96 E/S: The perfect solution for your home Discover the Luchs LWP 96 E/S, a state-of-the-art heat pump that impresses with an impressive heating capacity of 16 kW. This versatile device offers not only efficient heating, but also cooling and hot water – all in one compact system. Ideal for larger single-family homes, apartment buildings or commercial applications, the Luchs LWP 96 E/S is the reliable, cost-saving and environmentally friendly choice for your home. Sustainability and efficiency combined With the environmentally friendly refrigerant R290 (propane), the Luchs heat pump meets the highest environmental standards and at the same time ensures maximum energy efficiency. Made in Poland under strict EU guidelines, this product stands for quality and durability you can trust. Easy installation for immediate use The monobloc complete system is supplied with ...

Luchs LWP 45 E M 3Ph – your environmentally friendly heat pump for year-round feel-good temperatures Experience the Luchs LWP 45 E M 3Ph, an innovative heat pump that combines heating, cooling and hot water preparation in a compact monobloc system. With an impressive 8kW power rating and environmentally friendly R290 (propane) refrigerant, this unit not only offers high efficiency, but also quiet operation – perfect for your home or smaller commercial facilities. European quality from Poland Manufactured in Poland under strict European quality standards, the LWP 45 E M 3Ph convinces with its precise workmanship and durable components. This heat pump is the ideal choice for all those who want to rely on modern, energy-efficient heating technology and at the same time protect the environment. Main technical data at a glance: - Nominal power: 8 kW - Heating capacity (A7/ ...

Short-time heating plant of API Schmidt-Bretten as a complete production line (small dairy) with integrated milk separator and storage tanks (3 insulated stainless steel tanks / 1000 ltr.) Performance: approx. 1000 LTR. / h

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54

Luchs LWP 59 E M 3Ph – your environmentally friendly heat pump for year-round efficiency Discover the Luchs LWP 59 E M 3Ph, the perfect solution for heating, cooling and water heating in your home or small business. With an impressive 10kW power rating and environmentally friendly R290 (propane) refrigerant, this heat pump offers not only outstanding performance, but also quiet operation and sustainable technology – all in a compact monobloc system. European quality from Poland Manufactured in Poland under strict European quality standards, the LWP 59 E M 3Ph impresses with its robust workmanship and durable components. It is the ideal choice for single-family homes and smaller businesses that value efficiency and reliability. Main technical data: - Nominal power: 10 kW - Heating capacity (A7/W35): 6.0–15.0 kW - COP (A7/W35): 4.10–5.08 - Hot water capacity (A20/ ...

Luchs LWP 72 E M 3Ph – your environmentally friendly heat pump for year-round comfort Experience a new dimension of living comfort with the Luchs LWP 72 E M 3Ph! This highly efficient heat pump combines heating, cooling and hot water preparation in a powerful monobloc system. With an impressive power rating of 12 kW and the environmentally friendly R290 (propane) refrigerant, this model offers not only outstanding efficiency, but also quiet operation and sustainable technology that is good for the environment. European quality from Poland The LWP 72 E M 3Ph is manufactured in Poland under strict European quality standards. It impresses with its robust workmanship and high-quality components that ensure a long service life. This heat pump is the perfect choice for single-family homes or smaller apartment buildings with higher energy requirements that value comfort, efficiency a ...

Luchs LWP 88 E M 3Ph – The efficient air-to-water heat pump for your home Experience the Luchs LWP 88 E M 3Ph, a state-of-the-art air-to-water heat pump that not only provides cosy warmth and pleasant coolness, but also provides warm water for your home. With an impressive power rating of 14 kW, this model is the perfect solution for larger single-family homes or apartment buildings with high energy requirements. Thanks to the environmentally friendly refrigerant R290 (propane), you actively contribute to the protection of our environment. European quality from Poland Manufactured in Poland under strict European quality standards, the LWP 88 E M 3Ph convinces with its durable components and precise workmanship. Short delivery routes guarantee fast availability. If sustainability and energy efficiency are important to you, this heat pump is the ideal choice for your home. Te ...

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Lynx LWP 96 E M 3Ph: Nowoczesna Pompa Ciepła Powietrze-Woda dla Twojego Domu Szukasz efektywnego i ekologicznego sposobu na ogrzewanie swojego domu? Poznaj lynx LWP 96 E M 3Ph – nowoczesną pompę ciepła powietrze-woda, która wykorzystuje naturalny czynnik chłodniczy R290 (propane). Dzięki kompaktowej konstrukcji monoblokowej, ta pompa łączy w sobie wysoką efektywność, niezawodność i trwałość, co czyni ją idealnym rozwiązaniem dla większych domów jednorodzinnych, budynków wielorodzinnych oraz obiektów komercyjnych z wyższym zapotrzebowaniem na ciepło. Europejska Jakość – Wyprodukowana w Polsce Luchs LWP 96 E M 3Ph jest produkowana w Polsce, zgodnie z rygorystycznymi europejskimi normami jakości i bezpieczeństwa. Dzięki precyzyjnemu wykonaniu oraz zastosowaniu trwałych komponentów, ta pompa ciepła oferuje doskonałe połączenie efektywności en ...

Kroll M 150 Mobile Warm Air Generator Application Heating of halls, tents and construction sites Frost-free keeping in horticultural businesses or warehouses of all kinds Fast drying of new buildings Additional heating in the cold season Fuel: Heating oil EL Nominal heat output: 135 kW Nominal heat load: 150 kW Oil throughput: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Degree of protection>: IP 44 Metrics: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg More items - new and used - can be found in our shop! International shipping costs on request!

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

Reznor UDSA Gas Air Heater UDSA Gas Air Heaters – Efficient Right to the Peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from the outdoors or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of devices, halls can be heated in a particularly economical way directly – i.e. without central heating – with decentrally arranged, modu ...

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

sh. technical data muller martini