turning diameter:520 mm turning length:500 mm control:Fanuc 0i-TF
turning diameter over bed slide:320 mm max. swing diameter:520 mm
spindle speeds:4500 1/min. spindle passage:51 mm spindle drive:15/11
kW C-axis:0,001 ° tool turret:12-fach mit BMT-65 RADIAL, VDI40 _ feed
stepless:0,001-5000 mm/U travel -x axis:200 mm travel - z:600 mm rapid
power traverse in X-and Z direction:30 m/min taper in tailstock:4 MK
tailstock quill stroke:100 mm tailstock adjustment:500 mm weight of
the machine ca.:4000 kg Overall size:3,6 ...
16 cylinder MWM gas engine, output 2000 kW at 1000 rpm
Generator A.V.Kaick type DSG 2500, 6,600 Volt / 50 Hz,
Accessories: start-up, cable, heat exchangers, oil coolers, vibration
Gas control device with automatic stop function
turning diameter:520 mm turning length:600 mm control:Fanuc 0i TF
swing diameter over bed slide:320 mm max. turning diameter:280 mm Bar
capacity:64 mm spindle speeds:3500 1/min. x-travel:200 mm z-travel:600
mm rapid power traverse in X-and Z direction:30 m/min tailstock quill
stroke:100 mm tailstock adjustment:500 mm spindle drive:11/15 kW
Machine size (LxWxH):3,440x1,820x2,380 mm machine weight:4100 kg chip
conveyor: live center:4 MK heat exchanger: coolant system:
turret:12-fach, VDI 40 soft jaw: Boring bar holde ...
KW is a used (fully functional) fast 250
Bio gas generator / CHP. Be sold as an accessory:
Fuel processing module for RME with filter and conveyor system, gas
control line, exhaust - oxidation catalyst, gas processing module (for
biogas DN65 version 3), suitable container for unit (L x B: 9,50 x
2.95 m), emergency cooler (tabletop version, 320 kW), Engine room fan
(FE-DN630), Jan. - silencer (DN150), documentation for the CHP. The
systems are used. The sale takes place under exclusion of any
warranty. If you are ...
screw size:30 mm injection shot weight in Polysterol:97 g/PS closing
pressure:500 kN daylight:320 x 320 mm opening stroke:350 mm mould
height - Max./min.:200 mm control:Selogica daylight between platens -
max.:550 mm total power requirement:23,9 kW weight of the machine
ca.:2,3 t dimensions of the machine ca.: m CS version II - highly wear
resistant plastification unit - with Selogica control - technology
stage 2 - servo-regulated hydraulic plant with 2 regulating pumps -
connection for sorter unit - core pull - po ...
ARBURG ALLROUNDER 320-210-750
International size: 750-210 clamping force: 750 kN
Tool protection force: 37 kN
Opening force: 37/194 kN
Gap: maximum 375 / mm
Mould installation height: 250 min / mm from the clamping plates: 625
Max / mm
Distance between lights: 320x320mm
Tool clamping plate (Wxh): 490x490mm
Tool diameter: Max 477 / mm
Ejector force: 38 kN
Ejection stroke: 150 Max / mm
Screw diameter: 30/35/40 mm
Length: 23.3/20/17.5 L / D
Snail Trail: 150 Max / mm
Displacement: 106 ...
Handling for a 200t machine for sale, what is ready packed for about 8
months with us.
Easy control BJ2002
Here are the data to do this.
Geiger handling with control box and remote control, safety fence,
base plate for mounting on an ARBURG and conveyor belt
For sale is an 8 MW boiler with heat exchangers of the company Ygnis
Manufacturer: Ygnis Pyrotherm
Year of construction: 1995
Shipping weight: 14500 kg permissible boiler power: 8 MW
Permissible operating pressure: 6,0 bar
Permissible flow temperature: 120 ° C
Gas volume: 12, 73 m³
Water content: 4.58 m ³
The steam boilers, as well as the heat exchanger are fully functional
and were until recently, still in use.
-Operating temperature adjustable from 80 ° to 300 °
-Interior dimensions approx. B H 1000 x 1200 X 900 mm
-mot. Small parts conveyor for feeding with small parts
-Utility room 0.88 m³
-Total steam room 1.99 m ³
-Exhaust volume 85 m³/h
-maximum amount of solvent 22 Gr. / per batch
-Door opening B 1000 x H 1100 mm
-Opening flap in the door approx. B 750 x H 270 mm
-Power heater 24 kW
-Power Fan 4.45 kW
-Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm
Fiamma Forni Biscuit line
Hard & Soft Biscuit line.
- YOM 1996 but complete rebuilt in 2010 .
- 1000 mm working width.
- For all kind of biscuits, also filled and wire cut biscuits
- Part 1: Sugar mill plant
- with Cristall sugar Tank in Inox and integraded
double scew conveyor
- Double screw conveyor connected with
Sugar mill for Powder sugar
- connected with Powder sugar cyclon tank and
- connected with suction station on the plattform
over the Mixer
- with pl ...
For sale a the company Mothermik with Iveco diesel generator kW
generator with an output of 300 is motor and LEROY-SOMER.
Technical data de motor:
Type 8291 GIT
Speed 1500 1/min
Machine size about B 1300 x H 2200 x 4500 L machine weight ca. 6500 kg
flue gas temperature at full load 450 ° C
Combustion air requirements at n 1264 m ³/h
Electrical terminals power 300 kW
Thermal power 345kW
Fuel capacity fuel oil 760kW
Overall efficiency of 86%
Terminal efficiency 40%