heat used for sale

Description: Lot composed of approximately 50 gaskets for YANMAR air heater - art. 129100-77510 Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 3 kg

Tank with heating approx. 65 ltr. More then 300 machines new and second hand on our seema .de

technical data on request !

Grill, gas heated, dimensions: 400 mm x 900 mm x 950 mm.

Description: Machine number API 658431 max. pressure 13 bar Power consumption 75 kW Delivery rate 14,680 l/min Operating hours unknown , Electrical frequency converter defective Machine is sold as defective Approx. Onsite Dimension. (l x w x h): 2,290 x 1,080 x 1,820 mm, weight approx.: 1,680 kg

Key data: 790 KW, 738 kVA, 400 V

Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513

Lambion Boilers Auto. Cleaning Auto. Ash removal Storage container for loading Flue gas cyclone filter Flue chimney Facility is in very good condition has always been serviced Year of construction 2006 Nominal power 845 KW Combustion power 950 KW Temperature max 100 °C Pressure max 3.5 bar

Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, we ...

Description: Capacity to be heated: 6000 m3 incl. piping fuel: hout, Approx. Onsite Dimension. (l x w x h): 850 x 1,200 x 1,900 mm, weight approx.: 500 kg

Description: Adapted for environments of 100-150 square meters or 500 cubic meters. Voltage: 220 volts single-phase - Power: 0.2 Hp. Fireplace power: 29,900 Kcal/h. Conventional power yield: 25,000 Kcal/h. Air flow rate: 2,200 cubic meters/hour. 2 orientable outlets diameter: 180 mm. Fireplace dimensions: 500x400x590 mm (length x width x height). Chimney diameter: 160 mm. serial number: 419, heating power: 80 kW, fuel: Legna, Approx. Onsite Dimension. (l x w x h): 570 x 920 x 1,560 mm, weight approx.: 200 kg

Jemi tiltable fryer, gas heated, inside dimensions: 780 mm x 560 mm x 200 mm, total dimensions: 860 mm x 1000 mm x 1050 mm.

Description: Power: 2000W Power supply: 230V/50Hz Air temperature: I degree - 350°C Air temperature: 2nd degree – 550°C Airflow: 1st stage – 300 l/min Airflow: 2nd stage – 500 l/min Protection class: II Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 1 kg

Description: Power: 2000W Power supply: 230V/50Hz Air temperature: I degree - 350°C Air temperature: 2nd degree – 550°C Airflow: 1st stage – 300 l/min Airflow: 2nd stage – 500 l/min Protection class: II Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 1 kg

Description: Power: 2000W Power supply: 230V/50Hz Air temperature: I degree - 350°C Air temperature: 2nd degree – 550°C Airflow: 1st stage – 300 l/min Airflow: 2nd stage – 500 l/min Protection class: II Approx. Onsite Dimension. (l x w x h): 200 x 200 x 200 mm, weight approx.: 1 kg

Was in production for heating wine. More then 300 machines new and second hand on our seema .de

Description: For sale is a complete Hardening Shop with three Gas Carburising furnaces , two Tempering Air Circulation Furnaces , a Quenching Basin and a Washing Machine . For an overall impression, please take a look at the 3D tour. In the tour you can explore the hall over two floors: LINK TO THE HARDENING PLANT Brief description of the system components 3 x GAS COOLING FURNACE TYPE VCE 200/200 as electrically heated shaft furnace Furnace temperature max.: 1000° C Batch temperature max.: 950° C Batch weight max.: 18 tonnes Useful diameter: 2000 mm Effective height: 2000 mm Clearance diameter of guide cylinder: 2000 mm Oven housing diameter x height: 3450 x 3230 mm Oven connected load: 4 zones of 80 kW each = 320 kW 2 x AIR CIRCULATION FURNACE / TEMPERING FURNACE TYPE LUO 200/200 as electrically heated shaft furnace Oven temperature max.: 750° C Batch temperatu ...

Glue pump with heating including temperature control Drive type: pneumatic Control type: electric 5/2 solenoid valve Delivery rate per double stroke: approx. 33 cm³ (Water) Delivery rate at 2 Hz: approx. 4 l / min (240 l / h) Operating pressure: 3 - 6 bar Compressed air connection: plug nipple NW 7.2 Connection medium: hose nozzle 19 mm Suction tube length including suction base: 420 mm Waterproof according to IP66 Pump head: ABS Pump base: POM Riser pipe: stainless steel Suction base: stainless steel Valve balls: stainless steel Seals liquid part: FKM Electric voltage: 220-240V / 50/60 Hz Electrical connection: incl. Schuko plug Cable length: approx. 2 m More then 300 machines new and second hand on our seema .de

Wine Heater and Cooler Compact system for  • Direct cooling or heating of must at the beginning of fermentation • Tartaric stabilization of wines • Warming up wine from storage to bottling temperature • Biological reduction of acids • Regulation of fermentation temperature • Cool storage of wine until bottling • Suitable for sparkling wine and carbonated beverages (closed loop with no carbonation loss) • Cooling of liquids with particles such as unfiltered juice • Air cooling of the cellar in combination with additional equipment (thermo-fans and accessories) The stainless steel units are ready for operation, mobile and equipped with automatic temperature regulation. Technical data: Cooling capacity 41,000 W Max. output: 45,500 W Power consumption: 12.7 kW, 22.3 A Pump capacity: 10,000/12,000 l/h Connections: NW 40 DIN 11851 External dimensions: L 1050 x W 1 ...

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible.

Heating output: 140 kW, heating output switched in 4 stages of 35 kW each, air volume flow of 6500 m³/h, air speed of 9.8 m/s, stainless steel tubular heating element (1.4828) with a surface load of 3.9 W/cm², inlet temperature: approx. 20°C, outlet temperature: approx. 160°C, temperature sensor PT100, EC declaration of conformity. Two identical air heaters are available, with documentation, the heaters are still unused, an on-site inspection is possible.

General SKU169K559 LocationBarneveld Makeunknown Year of constructionunknown Material Shell materialStainless steel Cover materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface39.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger/Steam generator (1x) Heating surface39,5 M2 Number of tubes:168 Tube diameter25mm Tube length3000mm Shell capacityunknown Shell diameter1200mm Shell length2600mm Information Mounted on legscheck Floorspace4,0x1,5 M Total height2,5 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU279M283 LocationBarneveld Makeonbekend, typeplaat ontbreekt Material Shell materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.3 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface11,3 m2 Tube capacity±42 Ltr. U-typecheck Number of tubes:178 Tube diameter15mm Tube length1350mm Shell diameter325mm Shell length1450mm Shell connections1x dia. 65mm, 1x dia. 110mm, 1x dia. 45mm Cover connections2x dia. 60mm Information Floorspace2,0x0,65 M Total height0,65 M Weight250 KGShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU050C389 LocationBarneveld Makeunknown, manufacturer tag is missing Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU214W270 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB71/300/SH/3/SIC No.98072a Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface7.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface7,1m² ( in use 4,2m²) Tube capacity40 Ltr. Number of tubes:97 Tube diameter14 mm Tube length1980 mm Wall thickness tubes1,5 mm Max. temperature+150°C Shell capacity113 Ltr. Shell diameter300mm Shell length1800mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150, DN200 Cover connectionsDN50, DN80 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information Total height0,42 m Weight280 kg Floorspace0 ...

General SKU214W271 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB64/300/SH/2/SIC No.98075 Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface6.4 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface6,4m² Tube capacity33,7 Ltr. Number of tubes:164 Tube diameter14 Tube length±850 mm Wall thickness tubes1,5 Max. temperature+150°C Shell capacity46 Ltr. Shell diameter300mm Shell length850mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150, DN50 Cover connectionsDN80 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information Total height0,42 m Weight190 kg Floorspace0,42x1,40 m Technical specs  ...

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

General SKU394U1150 LocationBarneveld MakeGAB Neumann TypeN-B-11.5/GMP No.16754-13691 Year of construction1990 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell4 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Graphite Surface11.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface11,5 m² Tube capacity44 l Max. temperature-10°C / +180°C Shell capacity44 l Shell diameter705 mm Shell length1440 mm Max. temperature-10/+180°C Shell with expansion jointcheck Shell connectionsDia. 80 mm (2x) Cover connectionsDia. 200 mm, Dia. 100 mm MaterialGraphite Information Total height1,75 m Weight950 kg Floorspace0,85 x 0,85 mNew arrivalsShell and tube heat exchangersGab NeumannNew arrivalsHea ...

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Polar Heat shrink tunnel Stainless heat shrink tunnel, wire mesh belt, belt dimensions 2900mm x 170mm, max product height 260mm, variable speed, 3Ph

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

Due to project abandonment, I offer here my Twin Heat wood chip heater, it is built in 2010 I bought the heater myself 3 years ago, disassembled, cleaned and replaced and reassembled defective parts It is mounted on a sturdy steel plate and can be moved with a forklift Originally, I wanted to use it as a hall heating system and install it in a shipping container There are a lot of new parts installed, such as valves, expansion vessels, bearings, rotary wheel blades, thermal drainage protection and a lot of small stuff You can either burn solid fuel or wood chips, but it has a huge combustion chamber The rotary valve is completely re-lined with sheet metal and welded and re-mounted The wood chip burner has been cleaned and resealed, extinguishing system has been provided with new hoses I had the system briefly test runs with water to test it, everything worked You can remove the  ...

- Heat Exchanger Assy - HP Part Number CA245-07300 - for HP Indigo Series 2 Machines

Overview  This plant can be used to pasteurize and fill into pouches (BagInBoxes). Most recently, sauces and dressings were filled with it. It consists of a pasteurizing and filling line from TetraPak/ AlfaLaval. The line components were manufactured in 2014 and the line has only a few operating hours, having run only two days a week.  Technical data  Pasteur | TetraPak/ AlfaLaval | Ohmic Heating | 2014 Capacity: 2000 kg/h  3 heating modules á 60kW  Space requirement: 1000mm x 2700mm  Tube heat exchanger| TetraPak/ AlfaLaval | - | 2014     Space requirement: 6200mm x 950mm Sterile tank| TetraPak/ AlfaLaval | - | 2014      Diameter: 1000mm  Filler | | TetraPak/ AlfaLaval | C.A.F.1H/1 | 2014     Capacity: 250 bags/h (with 10l bags)      Possible bag sizes: 2l - 25l       Aseptic filling      Space requirement: 5800mm x 1790mm  

General SKUR0083 LocationBarneveld MakeUnknown manufacturer plate is missing Year of constructionunknown Main Features Capacity3 KW Motor0.37 KW Temp.90 °C Specified Features - Temperature control unit MaterialStainless steel Temperature control units Vessel sizesdia. 270x400mm Top connections2 Outletdia 40mm Water heatercheck Electric heatingcheck Heating medium:Fluid Electric capacity3 kW With pump0,37 kW 220-240/380-415 Volt With control 30-90 °C Information Mounted on framecheck Floorspace0,6x0,6 M Total height1,3 M Weight100 KgTemperature control units-Heat exchangers > Temperature control unitsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Geroldinger feeding station with electric heating and cell feeder.

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 530 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Table area: 502 x 502 mm Ram area: 530 x 500 mm Length: 1600 mm Depth: 1200 mm Height: 2300 mm Weight: 2 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

Electrically heated conveyor furnace

Gas-heated conveyor belt furnace

- ITM Heater Lamp Assy - HP Part Number CA254-02450 - for HP Indigo Series 2 Machines

- E/H Heating Unit - HP Part Number CA397-00342 - for HP Indigo Series 3 Machines

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Capacity: 60 hl/h

Darragon Induction heated press

Hot press for manufacturing grinding wheels Height: 3400 mm

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Possible to program: - different temperatures - holding time of press under pressure - multiple cycles Capacity: 600 ton Passage between uprights: 1020 mm Stroke: 400 mm Distance between table -- ram: 400 mm Table: 1000 x 1000 mm Length: 1590 mm Depth: 1150 mm Height: 3700 mm Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table + 2 watercooled tables max 220-240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Multiple cycles can be programmed Press with 2 pistons: Capacity lower piston: 750 ton (with digital readout for applied force) Capacity upper piston (counter pressure): 250 ton (with digital readout for applied force) Passage between uprights: 850 mm Distance between table -- ram: 500 mm Table: dia 800 mm Weight of press: 14 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3700 mm Weight: 14 ton

with 3 heated tables + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 600 mm Distance between table -- ram: 600 mm Table: 600 x 600 mm Length: 1500 mm Depth: 1150 mm Height: 2000 mm