133,377 used machines on RESALE, but how to find them? Machine Search
Key data: 1558 KW, 2300 kVA, 400 V
Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.
Including 1 Sharp hot air oven Auction-ID: A1-49790-1103
Available two units of this SIAT RECOPACK recovery boiler. This boiler recovers the heat from the exhaust gases of turbines or engines, but it doesn't have burner to produce his own heat. They are disassembled and ready to be load. Power 493kW pressure 12 bar Capacity 5065 l YOM 2009 Model Recopack
V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update al ...
UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924
T14 - used approx. 22 m³ / 22,000 L steel tank, repainted inside and out, with heating coil, lying on steel bases. Technical details: Content: approx. 22 m³ / 22,000 litres Material: Steel tank with inner coating Dimensions: approx. Ø 2.30 m × L 5.30 m / H total 2.70 m Other: Used steel tank, repainted inside and out, with heating coil. In good condition. Horizontal, above-ground storage tank on 2 steel bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam husks, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc., or e.g. as a firefighting water tank. Price on request. Transport can be organised at a reasonable price. It is ...
1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...
Key data: 330 , 413 , 400
Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.
Parking heater for sale Bosch Part Number: 0 141 002 021
General Description Industrial vacuum heat-treatment furnace manufactured by MILCO , model VP 1350 . Horizontal front-loading furnace designed for controlled thermal processing of metal components under vacuum or process-gas atmosphere. The installation comprises the furnace chamber, vacuum pumping equipment, process piping and separate electrical control system. Technical Details Manufacturer: MILCO Model: VP 1350 Machine type: Vacuum heat-treatment furnace Year: 2016 Power supply: 380 V, 50 Hz Installed power: 120 kW Horizontal cylindrical vacuum chamber Large hinged front loading door with multiple locking clamps Internal heating / hot-zone assembly Internal material support / transport system Vacuum pumping system Leybold-Heraeus vacuum equipment Cooling and process-gas piping Nitrogen filling system Pressure instrumentation Separate electrical control cabinet T ...
used
Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2020 New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Key data: 400 KW, 570 kVA, 400 V
Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued ...
Including 1 extra heating block Auction-ID: A1-49790-1205
Dear Ladies and Gentlemen, We hereby offer the following exhaust gas heat exchanger from Enkotherm. Year of construction 2012 Used, but with new tube bundles. So completely overhauled! Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Make: Siemens Built year: 2012 Alternators and 3-phase induction motors with squirrel cage rotor Alternator power: 2368 kva Motor Power: 315 kW; 1200 kW; 2500 kW. Frequency: 50 Hz and 60 Hz Class: BV and DNV Excellent condition Stocked in Europe #siemens #power #marine #vessel #ship #motor #alternator #generator
Air/water heat exchanger for enclosure cooling SK 3210100, Rittal, used Top The cooler has 2 water connections for the cooling medium water. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good condition. It looks as if it has never been used. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warr ...
HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...
The SE60 shrink tank is the perfect addition to your Multivac vacuum machine for shrink packaging of traditional products Max Product sizes (W x D x H): 600 x 400 x 180 mm Max weight: 25 kg Machine dimensions (W x D x H): 720 x 680 x 1250 mm Working height: 820 mm Machine weight: 115 kg
Heat exchanger thermal works 4 pcs. in different Sizes Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Including 1 Sharp hot air oven Auction-ID: A1-49818-1103
2x Aprovis flue gas heat exchanger Year of Make: 2013 Price: per AWT 2.500,00 € (net) For more information, see pictures. Sale due to site conversion and plant renewal. More pictures, information and offers on request.
Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems
Including 1 extra heating block Auction-ID: A1-49818-1205
Key data: 714 KW, 400 V
CHP natural gas, 2 units Onsite Energy ME3042L3 YOM 2009, Engine: MTU E3042L9, YOM 2016, 23,000h operating hours, Alternator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorption Chiller: Carrier 16LJ-A24E 689KW Cooling Capacity, YOM 2016, Emergency Cooler : Güntner GFH 090.2B/2x2-M 12m chimney, silencers, pumps, actuators, dampers, valves, gas control unite Superior control: synchronization, load management, island operation, grid support; ec Power cabinets, gas control valves, 714KWe, termal 1058KW, 698KW cooling capacity
Key data: 500 KW, 600 kVA, 400 V
Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997
Key data: 1200 KW, 1600 kVA, 400 V
Jenbacher Gas engine [JMS 416GS] available in dismantled condition. Specifications: - Type: J416 GS - mfy: 2012 - Power: 1222kW - Fuel: Biogas - Frequency: 50Hz - Alternator rating: 1870kva - Major Overhaul done at 30000 and 60000 hours. - Mass: 13550kg - Service Log book and maintenance manual available - Accessories: Control Panel, Gas line, Heat exchanger, pumps.
Carrier 30AWH012HD9 & 30AWH015HD9 Heat Pump Heating power: 12kW/15kW Power Cooling: 13.5kW/16kW Refrigerant: R410a Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
maximum number of results exceeded
please refine your search
100 € 
