We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,027 used machines on RESALE, but how to find them? Machine Search
new
:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position ...
new
:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...
used
Year of production: 1986 Serial number: 50 166 N and the machine was overhauled in 2003 with modernization of electrical control. The machine was equipped with a new SIEMENS automatic controller and new SIEMENS drives. GENERAL CHARACTERISTICS OF THE MACHINE The basic feature of the machine is a fixed portal, a sliding table. The portal has a height-adjustable crossbar, which is equipped with one or two vertical headstocks in the VFS 160 design. Furthermore, the portal is equipped with one or two side (horizontal) VFS 160 headstocks. These types of headstocks can be fitted with additional spindle heads, up to 4 pieces available. The clamping surface of the machine consists of two connected clamping tables, which after disconnection can be used individually (only one is always functional). Clamping table Dimensions of 1 table 2 2,000 x 4,000 mm Total length of connect ...
used
+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...
used
Distance between centers : 1000 mm Centers height : 175 mm Grinding wheel holder headstock orientation : 0 - 180 ° Grinding wheel holder headstock indexing precision : 5 ° Grinding wheel dimensions : 500 x 63 x 203 mm Cutting speed : 35 m/sec Headstock power : 7.5 kW Maximum workpiece weight : 130 kg Table orientation : 10 ° headstock rotation speed : 35-520 rpm EQUIPMENT : Sensitron 6 : Internal grinding spindle : 1 Measuring head MOVOMATIC ES124 for the diameter : 1 Tailstock : 1 Diamond grinding device for external wheel : 1 Radius grinding devic : 1 Display 2 axes HEIDENHAIN : 1 Lubricating tank with paper filtration : 1 Set of grinding wheel holders and grinding wheels : 1
used
The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axi ...
used
The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel ...
used
The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axis) 1500 mm 5 CNC axes – Siemens 840D Able to work with face plate (U axis) (machi ...
used
+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...
used
Surface Grinding Machine Fabr. STANKO Type 3 D 722 WMake -No: 43432, built in 1987Sanding area: 1250 x 320 x 400 mmsm./lg. Distance spindle center - clamping surface Table: 190/630 mmTable clamping surface: 1000 x 320 mmsm./lg. hydr. Longitudinal adjustment of the table: 300/1050 mmClamping surface of the magnetic plate: 900 x 320 mmHeight of the magnetic disk: 120 mmgr. Vertical adjustment of the headstock: 440 mmGr. transverse adjustment of the wheelhead: 400 mmsm./lg. Outer diameter of the grinding wheel: 325/450 mmDrm. Grinding wheel bore: 203 mmGrinding wheel speed: 1500 rpm.Stepless longitudinal movement of the table: 2.0 - 40 m / min.infinitely variable feed of the headstock: 0.5 - 3.0 m / min.Vertical rapid adjustment of the headstock: 406 mm / min.Drive power: 10 kWOutside dimensions approx: 3300 x 2020 x 2290 mmWeight approx: 7100 kgWith- magnetic disk- Separate hydraulics- Con ...
used
ELB SHLIFF SWBD-30 VA II surface grinding machine was manufactured in 1970 in Germany. The machine is equipped with an electromagnetic table consisting of three electromagnetic clamping plates, each 3000 mm long and 450 mm wide. It is possible to process workpieces on the work table of the magnetic grinder with a length of up to 3000 mm, width of up to 500 mm and maximum weight of 2000 kg. The grinding height depends on the grinding wheel wear – with a new grinding wheel it is possible to grind the workpiece with a maximum height of 450 mm, while with the used grinding wheel the grinding height is 540 mm. Grinding machine ELB SHLIFF SWBD 30 has also a mandrel for balancing grinding wheels, holders for grinding wheels and electro-automatic magnetic pole switch in electromagnetic plates. The machine underwent a complete overhaul carried out in 2002 by the Polish company JOTES. Tech ...
new
Key data: 299 mm, 620 mm, 150 mm
Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...
used
Grinding diameter: 630 mm Grinding length: 2000 mm Peak height: 320 mm Table speed - without steps: 0.005-5 m / min Longitudinal table movement min./max.: 5/3350 mm Table speed: 8 m / min Grinding headstock-cross movement: 420 mm Workpiece headstock motor: 3,0 kW Grinding headstock-motor power: 22 kW Motor of the internal grinding device: 3 kW Lubricating pump motor: 0,11 kW Machine weight approx.: 15700 kg Space requirement approx.: H1970 / B3100 / L12650 mm
used
Rotary table size: 2000x2000 mm Max. load on table: 20 tons Spindle diameter: 160 mm Inner cone of spindle: 100 metrical Max. spindle torque: 250000 kgcm Bed height: 550 mm Width of bed guides: 2000 mm Max. drilling depth with boring spindle: 1600 mm Max. move-out of quill: 1250 mm Normal travel of spindle headstock on the column: 2500 mm X-axis: 3000 mm Min. height of spindle axis over bed surface: 1400 mm Range of steplessly adjustable spindle speeds: 2-800 rpm Range of steplessly adjustable drilling feeds (spindle and quill): 0,5-1600 mm/min Range of steplessly adjustable milling feeds (spindle headstock and column): 1-3200 mm/min Speed of rapid travel at drilling (spindle, quill): 1600 mm/min Speed of rapid travel at milling (spindle headstock in vertical direction, column): 3200 mm/min Power of adjustable electric motor of direct current of spindle drive: 6-55 kW R ...
used
Description: Length of the jaw: 900 mm Headstock for collet chuck type: F27 Collet opening: 22 mm Center height: 102 mm Largest distance between headstock and cross support: 335 mm Drive through leather/nilon V-belt for headstock: F27 With turret holder and other machine accessories as shown in the pictures For further technical data see pictures With technical documentation as shown in the pictures Approx. Onsite Dimension. (l x w x h): 1,300 x 600 x 1,680 mm, weight approx.: 500 kg
used
Description: Year of construction: presumably 1986 Center distance: 600 mm Travel: max. 900 mm Cross slide: Travel, with feed handwheel in fine or coarse gear: 245 mm Travel per handwheel rotation, coarse/fine: 8/1 mm/diameter Rapid feed and return, hydraulic: 40 mm Grinding headstock: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm Grinding wheel for right spindle end: 225 x 20 x 76.2 mm Grinding spindle speeds: 1500/1700/2200 rpm Swivel range of the sanding headstock: 270° With indexing every 90 Internal grinding spindle mounting hole: 70 (80) mm diameter Workpiece headstock: Swivel range: 340° For further technical data see pictures Center height: 125 mm Workpiece diameter: max. 249 mm With accessories as shown in the pictures, e.g. collets, grinding wheels and other grinding tools and accessories for the cylindrical grinding machine weight approx.: 3,000 kg, App ...
used
Workspace tip height 102 mm centre distance - with normal headstock with 450 mm - reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm spindle poles spindle nose for collets type Schaublin W25 spindle bore 25 mm collets passage 20 mm reduction ratio of 1:5 Raedergetriebes cheek height x width x length 168 x 130 x 1000 mm cheek from cast iron, trapezoidal profile as lathe 102 N and dovetail, hardened and ground. Sledge greatest way on the cheek width 400 mm runner - length 90 mm top runner above 80 194 mm way manual adjustment 20 mm shank of tools 12 x 12 mm cross slide width length 94 300 mm way manual adjustment 100 mm bed slide length of leadership on the cheek 250 mm screw lead screw for longitudinal turning and threading, Ø 40 mm screw hardened, Ground thread, slope 4 mm speed range RPM 270 3000 rpm turning 0.02 0.3 mm / Rev. Tapping largest slope ...
used
1.1. Tacchi turning lathe Model DB 1900 x 10.000 Series 132 L • CNC Sinumerik 840 DE-SL • Centre height from the ways 1,900 mm • swing over saddle 3,050 mm • Swing over bed, without telescopic covers 3,300 mm • max. work piece weight 40,000 kg • Min. and max. distance between headstock and Tailstock without steady rests 500 – 10.000mm • Main headstock o Diameter face plate 3.000 and additional 1.000mm o Integrated C-Axis o Drive power S1 (100%) 95 kW o Range of spindle speed 1 – 400 rpm o Number of speed ranges 3 o torque 80,000 Nm o Spindle nose DIN 55026 20" o Spindle hole 160mm • Tailstock o Quill diameter 450mm o Quill stroke 200mm o Internal taper Metric 100 at 60° • Equipment o 12-position live tool turret Station diameter VDI 620mm Power 18.5 kW Max torque 400 Nm Max speed 1,500 rpm o Y-axis Vertical ...
used
internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...
used
Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm
used
The positioner SILVESTRINI Mod. SA 1 ORBIT EL T5nbsp; are composed by: HEADSTOCK Section The structure in rugged electro-welded steelwork, supporting a motorized (horizontal axis) rotation system.nbsp; The rotation is given by a gear motor that, by means of a pinion, meshes with a large slewing bearing, to which is fixed the ORBIT Structure. This sectionnbsp; is equipped with lateral precision guides to permit the ORBITnbsp; vertical lifting movement.nbsp; The elevation is hydraulic, by means of hydraulic piston on which are inserted special clamping safety valves, that prevent the fall of the table, in case ofnbsp; accidental breakage ofnbsp; tubes. On the horizontal axis is installed an electric rotating joint for the connexions with the Orbitnbsp; table (vertical axis). This permits the total axes free rotation. MECHANICAL STRUCTURE ( ORBIT) It Is constructed in rugged electro-welde ...
used
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...
used
Solid drill diameter: 200 mm bore depth: / mm number of spindles: / Technical specifications Power: 129kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm / min Oil system capacity: 20,000 liters Maximum flow rate: 1500 l / min Circumferential diameter in bezel: 1100mm Circumferential diameter over bed: 1250mm Distance between centers: 11000mm Clamping diameter faceplate: up to 1100mm Max. Workpiece weight with a stick: 10t Clamping range of the two steady rests: 150 - 1100mm Clamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mm dimension Min. Outside diameter: 406 mm Max. Outside diameter: 850mm Wall thickness: 10 150mm Max. Workpiece length: 11000mm Max. Workpiece weight: 10 t Max. Strength: 800 N / mm² Specific cutting resistance (Ks): 2000 2100 N / mm² Machine data Machine length: 28,800mm Center height: 560mm Circumferent ...
used
The ZVL BRH 40A II surface grinding machine was manufactured by the Czechoslovak concern ZVL, the Powaska Bystrzyca bearing production plant in 1985. The grinder is designed for grinding flat surfaces of various metal products, with a maximum length of 1500 mm, a width of 470 mm and a height of 500 mm. The machine has a work table with dimensions of 400 x 1500 mm and a 7.5 kW spindle, rotating at a speed of 1920 rpm. The total weight of the grinder is 4520 kg. The machine is offered with accessories. Characteristic parameters of the surface grinding machine ZVL BRH 40A II - working surface of the grinding table: 400 x 1500 mm - maximum grinding length: 1500 mm - the longest longitudinal table travel, manual: 1700 mm - maximum width of grinding: 470 mm - maximum height of grinding: 500 mm - the greatest load of the working table: 500 kg - the greatest transverse travel of the ...
used
SHW UF 6 Travel • X-axis (bed): 6,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Heidenhain TNC 430 Feed speed • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head holder: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction 1998 • 2013 – Overhaul of the headstock • 2017 – Overhaul of the milling head • 2022 – Partial overhaul Clip • T-slots: 22 H12, DIN 650 • T-slot spacing: 250 mm, • Clamping area: 6,000 mm x 2,000 mm Conveyor • Task length: 6,000 mm • Task width: 350 mm • Ejection height over corridor: 1,250 mm Coolant device • Paper belt filter system o Container capacity: 500 ...
used
turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 751Serial -No: 84119, year of construction 1984Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 245 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 5 m/minTravel per handwheel rotation Position 1/ 25.5 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely variable speed: ...
used
Precision universal cylindrical grinding machine make ZIERSCH & BALTRUSCH type URS 750with internal grinding deviceMake -No: 220 built in 1976Technical specifications:Center height: 130 mmDistance between centers: 750 mmmax. workpiece diameter with new disc: 250 mmPermissible workpiece weight between the tips/in the chuck: 120/60 kgLONGITUDINAL SLIDEmax travel:900mmspeed hydr. infinitely variable: 0.05 - 6 m/minTravel per handwheel rotation position 1/ 25 mm/ 10 mmGraduation mark of the handwheel position 0.1 mmReading Accuracy:0.01mmCROSS SLIDERapid feed and return: 40 mmManual adjustment: 54 mmTravel of one hand wheel turn: 1 mmgr. Insertion depth: 1.4 mm/Drm.Plunge feed: 0.05 - 10 mm/minGRINDING HEADSTOCK3 grinding spindle speeds: 1580, 1750, 1970 rpm.Coarse adjustment: 155 mmSwiveling of the grinding headstock:+ - 30°Drive power of the grinding headstock: 4 kWWORKHEADInfinitely vari ...
used
SHW UF 5 Travel • X-axis (rotary table): 1,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (Switching between horizontal and vertical machining) Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Year of construction 1994 • Refurbished in 2016 Stepless NC rotary table • Backle PKTF 55 • Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine ov ...
used
SHW UF 5 ! The advertised pictures are comparison pictures! Travel • X-axis (rotary table): 1,500 mm • Y-axis (headstock vertical): 1,000 mm • Z-axis (headstock horizontal): 1,100 mm Control • CNC control: Heidenhain TNC 430 Feed speed • X - axis: 2 – 12,000 mm/min • Y and Z axes: 2 – 18,000 mm/min Universal milling head in orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm Year of construction 1997 • 2022 – Partial overhaul CNC recessed rotary table • T-slots: 22 H7, DIN 650 • T-slot spacing:125 mm, • Clamping surface: 1,000 mm x 1,000 mm • Corner dimension: diameter 1,250 mm • Table load max.; 6,000 kg Automatic tool changer •Tool magazine with 90 magazine slots Work area cladding ...
used
Schaudt ZX11 - Premium Overhauled [RETROFIT] - Compact cross slide CNC grinding machine - Tip height: 180 mm - Grinding length: 600 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 80kg - Workpiece headstock: MK4 - Tailstock: MK4 - Installation dimensions: approx. 2,700x2,400 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request
used
Schaudt PS51 600 - Premium Overhauled [RETROFIT] - CNC production grinding machine for large-scale production - Tip height: 180 mm - Grinding length: 600 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 300kg - Workpiece headstock: MK5 - Tailstock: MK5 - Installation dimensions: approx. 4,100x2,800 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - Automatic door drive - Grinding headstock swivelled to fixed stop - suitable automation - Peak increase - u.v.m. on request / customer request
used
Travel • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Siemens Sinumerik 840 C o Option control conversion Heidenhain iTNC 530 o Option control conversion Heidenhain TNC 640 o Option control conversion Siemens Sinumerik 840 SL Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2022 – Partial overhaul Clip • T-slots: 28 H7 • T-slot spacing: 250 mm, • Clamping area: 8,500 mm x 1,500 mm Chip conveyors (2 pieces) ...
used
Schaudt ZX11 - Premium Overhauled [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 / 250 mm - Grinding length: 2,500 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 600kg - Workpiece headstock: MK5 - Tailstock: MK5 - Installation dimensions: approx. 7,200x2,600 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request
used
Schaudt PF4 1000 - Premium overhaul [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 mm - Grinding length: 1,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 300kg - Workpiece headstock: MK4 - Tailstock: MK4 - Installation dimensions: approx. 4,500x2,400 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request
used
Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...
used
Universal external cylindrical grinding machine Studer S 12 + Automation loading system Seckler Manufacturer [manufacturer]: Studer CH Switzerland Type [ type]: Studer S 12 Control unit: Siemens 840D Sinumerik + Seckler Automation Ldesystem A16 + Streuli filtration system + Hönag Filtec exhaust air system Incl. handwheel/control panel Year of construction[construction year]: 10/2004 - 09/2017 Operating hours approx. 39.700h Dimensions Center width 150mm Grinding length max. 150mm Center height 175mm Grinding diameter 500mm workpiece weight 80kg Cross slide (X) travel 300mm Speed 0.001-30'000 mm/min. Lin. Mot. Resolution 0.00001 mm Longitudinal slide (Z) travel 350mm Speed 0.001-30'000 mm/min. Lin. Mot. Resolution 0.00001 mm Sanding headstock Grinding head pos. 0° or 30° Drive power 7.5/12.5 kW Grinding wheel right ø 500 x 80 x 203mm In ...
used
GeneralTurn- mill machining centre; Control: Siemens sl Operate3G without ShopTurn appr 2 channel Tool magazineNumber of tools38 Max. tool length250 mmMax. tool diameter70 mmMax. tool weight3 KgB-axis Turning-milling spindleSwivelling range+/- 120 degreeSpeed range B3100 rpmAngular value, min.1 degreeTurning-milling spindleSpindle taperCapto C5 Drive power (100% DC)5,5 kWSpindle speed-20000 rpmDrive power (40% DC)7,5 kWTorque (100% DC)22 NmTorque (40% DC)30 Nmangular value, min.5 degreelocking moment700 NmB-axis counter spindlePositioning angle B3-axis, in 5 degree steps0 - 225 degreeSpeed range B340 rpmSlide 3Longitudinal stroke665 mmRapid traverse Z36 m/minSlide 1Longitudinal stroke454 mmTransverse stroke380 mmRapid traverse in X40 m/minY axis, vertical+/- 105 mmRapid traverse in Z50 m/minRapid traverse in Y40 m/minHeadstock, rightClamping chuck Ø140 mmSpindle bore38 mmSpindle diametr ...
GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 3Longitudinal stroke1200 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...
GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...
GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...
used
This machine is currently undergoing an extensive overhaul in our company. Ask about the current status of the overhaul and convince yourself of the machine during a viewing appointment at MBM. SHW UF 6 Travel • X-axis (bed): 6,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (headstock): 1,200 (1,500) mm Control • CNC control: Heidenhain TNC 430 Feed rate • X, Y and Z axes infinitely variable from: 2 – 12,000 mm/min Universal milling head in orthogonal design • Swivel range milling head mount: 340 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 22 – 3,200 rpm Year of construction: 1998 • 2013 – Headstock overhaul • 2017 – Overhaul of milling head • 2023 – Partial overhaul Clip • T-slots: 22 H12, DIN 650 • T-slot spacing: 250 mm, • Clamping area: 6,000 mm x 2,000 ...
used
Specifications Power: 129kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Capacity oil plant: 20,000 liters Maximum flow rate: 1500 l/min Swing diameter in bezel: 1100mm Swing diameter over bed: 1250mm Center distance: 11000mm Clamping diameter face plate: up to 1100mm Max. workpiece weight with one setting stick: 10t Clamping range of the two bezels: 150 - 1100mm Clamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mm Dimension Min. outer diameter: 406 mm Max. outer diameter: 850mm Wall thickness: 10150mm Max. workpiece length: 11000mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 20002100 N/mm² Machine data Machine length: 28.800mm Center height: 560mm Swing diameter over bed: 1120mm Solid drilling diameter: 200mm Core drilling diameter: 350mm Boring d ...
used
turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: Fanuc 31i-Model B c-axis: 0,001 Grad gripping station: 32 mm speeds: 6000 U/min c-axis: 0,001 0 turret (x-stations): 2x16 Stationen worktool system: 16 Stirnseite worktool system: 16 Quer-Rückseite worktool system: 5 Drehmeißel/Turn total power requirement: 3,7/5,5 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,6 x 2 x 1,9 m driven tools: 24 16+8 bar loader: FMB 3-36/3200 CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36 Very good condition, few working hours # Vib Turn chip breaking software # FMB 3-36 is equipped with two channels 22 and 32mm. # Pick-up spindle is equipped with Forkardt chuck. Max. overlap diameter 9mm # Extended headstock stroke Z1 axis 450mm (main spindle) # Extended headstock stroke Z2-axis 340mm (pick-up spindle) # High pressu ...
used
Bed milling machine Manufacturer: SHW Werkzeugmaschinen Type: UF 5 Travel • X-axis: 2,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Heidenhain TNC 155 B Automatic swivel head (Switch between horizontal and vertical editing) Quill 120mm Milling spindle holder SK 50 Speed 2,500 rpm Mill table • Clamping area: 1500 x 800 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include, among other things, spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Performances: -Machines Ilbgjd8lvl -Spares -Customer service - Machine service - Machine overhauls - Control modernization _____ Second-hand machin ...
used
Hanwha STL 38 sliding head lathe :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Main Spindle Power: 11Kw - Main Spindle Bar Clearance: 38mm Headstock stroke (Z1): 320mm - Main spindle speed: 8000 - Number of linear axes: 8 - Number of fixed tool positions on the tool plate: 5 Number of driven tool holder plate tool slots: 4 Rapid feeds for linear axes X Y Z: 32m/min High refrigerant pressure: yes Number-of turrets-tool-slides: 1 number-of tools-first-turret-slide: 10 Number-motorized-first-turret-slide: 10 tool-holder-type-first-turret-slide: VDI 30 X-axis-stroke-first-turret-slide: 140mm Y-axis-stroke-first-turret-slide: + - 50mm Sub-spindle: yes Sub-spindle speed: 8000 Power against spindle: 11Kw Bar clearance: 38mm Counter spindle stroke Z : 320mm Number of fixed rear tools: 4 Refrigerant Used: Neat Oil Bar Feed ...
used
DECO 2000-26 year 2001 IEMCA BOSS 445 bar feeder + SERMETO chip conveyor + parts conveyor belt. 40269 Working hours S1 spindle capacity 32 mm (main headstock spindle) S4 spindle capacity 32 mm (against spindle) main operation: 2 combs capacity 5 tools each S2 motorization at reed 2 with mounting of 4 rotary tools possible A device at the end capacity 4 tools S3 motorization at the end device with mounting of 4 rotary tools possible Counter operation: 4 longitudinal fixed or rotating tools 3 transverse fixed or rotating tools S5 transverse and longitudinal engines. Pneumatic part ejector + jaws for part recovery (basket or mounted jaws) Many rotating and fixed tool holders supplied Many clamps and barrel provided Complete overhaul carried out by the machine manufacturer in December 2022 During this overhaul, the following elements were re ...
used
power supply 380 V weight 1520 kg power of the grinding wheel spindle 2.2 kW workpiece spindle power 0.37 kW grinding spindle speed 2100-2800 rpm. Rotation of the grinding wheel headstock 60 ° Table rotation 10 ° Rotation of the headstock of the workpiece 90 ° Maximum diameter of the ground object 160 mm Maximum center distance 320 mm
used
General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...
used
GeneralTwo spindle Swiss turning automatic lathe; Control: Fanuc 310is Working areaBar diameter max.42 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B236 and bush-spindle syncronismDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55 KWDouble tool h. for ext.machining on rev.Double tool holder for external machining on revolver for shaft 16x16Double drill hold. on rev.cyl.junct.d.25Double drill holder on revolver with cyl. junction diam.25mmRad.driven mill.-drill.unit on rev.Radial driven milling and drilling unit on revolver with junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 rpmDouble axial driver drill.-mill.-unit on rev.Double axial driven drilling and milling unit on revolver with cyl. junction for collet ESX/ER 20 ratio 1:1 speed max. 5000 r ...