head coating line used for sale

We sell an older but fully functional and complete TRIBO powder coating system consisting of - Through-baking furnace INDAPP approx. 8m x 4m, oil firing. - District conveyor with infinitely variable drive - 2 automatic cabins with 2 spray guns each - 1 hand cabin (self-built) - Hand sprayer TRIBO96C from INTEC - Suitable cyclones for powder recovery - Vibrators for powder screening - Extraction, powder filter The entire system is more than 40 years old, but fully functional and still in use. The TRIBO system works without high voltage, the charge is generated by rubbing the powder in the plastic tube of the spray gun. We have been using the system for about 40 years to paint housing parts made of sheet steel, which works very well and also economically fast. Please note: Sale from location. The system must be completely dismantled by the buyer. To do this, look at t ...

Auction-ID: A1-45406-51

Dimensions Inlet: 773 mm Spout: 584 mm, width 180 mm Height: 1440 mm Width: 384 mm Depth: 543 mm Weight: 110 kg More data Container capacity: 10 kg Technical data Connected load: 1.3 kW Productivity: 35 kg/h (depending on process) Voltage: 220 V, 60 Hz, 3-phase or 1-phase Item condition: as good as new Availability: immediately Vibrating console: available Conveyor belt: available Operating hours (total): approx. 7

3 x dosing systems, including 4 x PBS fluid tanks built in 2008 Auction-ID: A1-45447-20

including 2 x PBS fluid tanks. Auction-ID: A1-45447-21

including 1 x PBS fluid reservoir. Auction-ID: A1-45447-22

Degree of protection: IP 54 (dust protection and splash water protection) Extraction capacity: 4000 m³/h Filter area: 30 m² Extraction capacity: 4000 m³ Dimensions cabin: 1900 x 1720 x 2720 mm (L/W/H) Auction-ID: A1-45447-19

With filter system ESB type AA 600 Compressed air protection class: IP54 Vibrating motor: 2 x 0.75 kW Fan motor: 2.2k W Total connected load: 6 kW Filter area: 2 X 72 m² Number of cartridges: 2 X 4 Extraction capacity: 6000 m³/h Air pressure maximum.8 bar Cleaning pressure: 7 bar, Including: 2 x ZA 02 lifting device, 8 Automatic powder gun type PG 2-AX, ESB control cabinet type 60191, Make number 600 Auction-ID: A1-45447-1

Pelletizing turbine Pellegrini, Type T150, Unperforated tank with mixing baffle, Capacity: 205 to 360kg, from 4 to 18 rpm, Sold with its GRACO spray pump, Tank capacity in (Kg): 205/360 , Number of revolutions per minute: 4 - 18 , Turbine dimensions (mm): 1150x1540 H 1980, Heating power: 5160 Kcal/h , Tank capacity in (kg): 205/360 , Number of revolutions / minute: 4 - 18

Auction-ID: A1-45411-133

- Maximum workpiece width approx. 120 mm. - Maximum part height approx. 100 mm. - 4 rubber top rollers + 4 metal bottom rollers. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-713

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

Chocolate Enrobing Machine Dedy 220 Mesh belt width 220 mm Belt speed infinitely adjustable Working direction from left to right Stainless steel version Connection 220V Used machine as good as new & SAB tested with warranty + spare parts service

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

with 3-jaw lining Röhm - 200 mm - 15 pitch

Cylinder head Wichmann AX AXG AXAG

Deutz cylinder heads in exchange complete with new valves, seat rings+guides Head screws FL712/812 = Net 36,-/piece Head seal kit FL712/812 = Net 25,-/set all prices per piece plus. law.Tax.Price changes reserved. info@miw-zeven.de

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI

We offer new cylinder heads with valves+springs fully assembled from stock immediately available to: MIW Ltd. Engine Repair Plant North-West Ring 8 D-27404 Zeven / Germany Tel:0049(0) 4281-950583 Fax:0049(0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

Güldner 2-6L79,G20-50 Zylinderkopf kpl.mit Ventilen im Austausch ab Lager lieferbar. Preise per Stück,zuzügl.gesetzl.Steuer,Preisänderungen vorbehalten. info@miw-zeven.de

Cylinder head complete with valves in exchange info@miw-zeven.de

Reconditioned cylinder head

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Cylinder head Exchange

Cylinder head recon E-start

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

Cylinder head DEUTZ FL612 complete with valves in exchange available from stock all prices per piece plus vat, price changes reserved.

Reconditioned cylinder head

Cylinder head Exchange

Cylinder head Exchange

we offer for MRI-use... Medrad MRI Dual-Head-Injector Typ: Spectris incl. TESTING FROM OEM Technican - Injector Head PEDESTAL unit - Head control unit - optical Transmitter/Receiver - Display control unit - Master control unit - Operation manual...englisch language - cable/etc. fully tested from OEM technican YOU ARE WELCOME TO INSPECT

Cylinder head Exchange

Cylinder head Exchange

Cylinder head Exchange

Reconditioned cylinder head

We offer from stock Zeven: DEUTZ F6-8L 613 cylinder heads completely with valves + spring newly assembled. MIW GmbH Motoen-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven / Germany Phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.MIW-ZEVEN

Reconditioned cylinder head not

Reconditioned cylinder head not

Cylinder heads in Exchange

There are various new parts for King industrial head machine I-Rex for sale. new flange for drum King industrial head machine I-Rex: - Outer diameter: 310mm - Inner diameter: 40mm - Width: 25mm - Material aluminium new ripple shaft for drum King industrial head machine I-Rex: - Length: 910mm - Outer diameter: 59mm - One side bearing seat: 20mm outer diameter - Steel tinned Side plate dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex: - teflonized Side plate dough guide for pre-portioners for type TRÖ 240 for drum King industrial head machine I-Rex Plastic inner side plate Dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Aluminum side panel for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Gear set Z 24 for pre-portioners for type TRÖ 240 for  ...

Cylinder heads in Exchange

Cylinder head Exchange

Cylinder head Exchange

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

Cylinder head Exchange

Apple Engineering Four head pneumatic depositor Model: MD Serial: MC13611 four head depositor, individual controlled heads, on mobile height adjustable frame

Cylinder head, Bergen BRM Lower OD 430 mm, upper OD 420 mm Draw. no. 528/15-1 Reconditioned Part no: 403690 Part no: 528/15-1

RECON Part number: 0400 5839 E-start Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Cylinder head E-start RECON Part number: 0400 1652 Complete Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us.