head coating line used for sale

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen. info@miw-zeven.de

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Deutz Zylinderköpfe im Tausch komplett mit neuen Ventilen,Sitzringen+Führungen info@miw-zeven.de

Round-cut heading machine for whitefish Baader IS033 Processes: cod and other whitefish with throat cut Working range: 1-13 kg Throughput rate: up to 30 fish/min Operator: 1 person The fish is placed belly to operator head first into the machine. The fish head is held and the entire fish is transported to the knife section where a high-yield head cut is performed. The main body of the fish, with collarbone on, discharges to the front of the machine. The head is transported via a chute to the rear of the machine. Thanks to its construction, the operator has a clear view of the machine. Adjustments e.g. for adaptations or service operation are performed easily and operator-friendly as well as knife replacement. Technical Data: Water consumption: 10 l/min Power consumption: 2.2 kW Features Maximum yield Easy handling and clean up No size adjustment ne ...

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Manufacturer: ELF Year : 1989 Equipment modified several times by the manufacturer Stoppil Number of heads : 6 adjustable units Type of products : Liquid / semi-liquid Type of packaging : Cans, bottles, jars, etc. Operation: pneumatic Filling: gravitational Stainless steel hopper + level sensor Raise/lower cylinder Drip tray Conveyor Product stop cylinders Electrical cabinet Flexible feed hose with valve Variable speed drive for 2 feed pumps. Omron PLC

Manufacturer : Stoppil Model: EC6050 Type : Automatic linear filler   Number of heads : 6 Product : Liquid or semi-liquid Capacity : 500 ml / 5 L Flowmeters : electromagnetic Tank : 316 stainless steel Poppet valve   Cylinders: inlet / outlet Drip tray Conveyor 1 additional set of heads Documentation available

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Sulzer METCO Plasma Coating Plant for cylinder block and cylinder head, YOM 2002 New price: ? 16-20 mio

Suitable for coating plastic profiles, includes flaming, hoover, humidifier, cooling unit, vacuum pumps, double diaphragm pump, pulsation damper, pull-rope emergency switch, reflection light barrier, filter control valve and other elements, with documentation.

Used chocolate coating line by TZW Nilsen. Width of coating and belt 60 cm, length of cooling tunnel can be customised 14 mb, 16 mb. All made of stainless steel. After a complete overhaul (new nets, new belt, new controls).

This machine can produce PE, BOPP adhesive tapes, PET silicone tapes Coating units: - kissing rolls for BOPP adhesive tapes coating (film 25-45 um + acrylic glue 10-30 um) - Mayer bar for PE, BOPP adhesive tapes coating (film 20-100 um + acrylic glue 3-20 um) Technical data 1. Outline dimension（LXWXH）：40698×3720×5150mm 2. Effective width：1320mm 3. Rollers width：1450mm 4. Max mechanical speed： 220m/min 5. Max production speed： 200m/min 6. Max diameter：φ600mm 7. Max rewind diameter：φ600mm 8. Paper core size：3“（φ76） 9. Method of heating：hot oil 10. 9 units of ovens, 4m per unit, total 36m 11.Temperature control：max 120±4℃ 12. Rewind edge tolerance： ≤±2mm 13. Evenness degree： ≤±0.0015mm 14. Total power：95kw 15. Power supply：380V，50Hz ...

Turnkey delivery in 100 working days 2 hours drive for a reference plant, several locations in the DACH region (since 2010) Complete powder coating plant, turnkey delivery Control units from Gema, Wagner or Nordson With plastic cabins, powder center, pump conveyor, automatic guns, Siemens Simatec controls 3D scanners, according to the latest technology... and, of course, pre-treatment with nano-coating Contact us now, it's worth asking powceq com (project page) , see also video here

Powder coating line: 1. Chain conveyor 2. Continuous painting furnace 3. Pass-through spray booths connected to the paint recovery system: 3 pcs. 4. Pass powder cabins without recovery: 3 pcs / pass-through spray booths without recovery: 2 pcs. 5. Manipulator (up & down movement) with powder sprayer: 1 pc. Automatic manipulator (up-down) with paint applicator: 1 pc. 6. Powder sprayer: 1 pc/ powder paint applicator 1 pc.

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina

TRANSFER TYPE POWDER COATING LINE Curing oven - gas, diesel or electrical source Powder coating booth - cyclone type or cartridge filtered Powder coating equipment - manual or automatic system Overhead conveyor system - tracks trolleys and frull structure Contact us for quotation We provide the best technical solutions and competitive prices German speaking contact in Germany VOGAMAKINA Ltd.

Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

General SKU300U605 LocationBarneveld MakeGS Coating System TypeHT/M3 No.HT-2191 Year of construction1995 Main Features MaterialStainless steel Motor0.22 KW Inlet diameter80 mm Specified Features - Coating pan MaterialStainless steel 1.4401 (316) Coating pancheck Capacity2-4 Ltr. Pan diameter450 mm In-/Outletdia. 80 mm Motor0,22 kW, 380 volt With frequency controllercheck With electric heatingcheck With fancheck Motor0,25 kW 220/380 Volt With spraying armcheck With dosing pumpcheck (Masterflex Model No. 7523-35) Information Mounted on wheelscheck With switchgearcheck Total height1,65 m Weight450 kg CEcheck Floorspace1,04 x 0,80 mCoating pansGS Coating SystemsCoating pans > Coating pansBrand > GS Coating Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

Gulf Coating pan 150Kg stainless pan, 0.75Kw, 3Ph

Gulf Coating pan 150Kg stainless pan, 0.75Kw, 3Ph

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Precious chocolates coating drum Stainless, 250l coating drum, variable speed, forward and reverse, on stainless frame, 1Ph

Skerman coating pan 150Kg coating pan, stainless pan, 3Ph

VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 75 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator while coat ...

VM VG1-VN VOGA MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 70 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator whil ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

PATRONENFILTER FÜR PULVERBESCHICHTUNGSKABINEN Die Filter bestehen aus 100% reinem Polyester. Nachstehend sind die verfügbaren Standardgrößen aufgeführt 320x600mm 320x650mm 320x1000mm 320x1200mm Andere Größen und Spezifikationen können ebenfalls angefertigt werden. Kontaktieren Sie uns für weitere Informationen und Preise. für Pulverkabinen für Staubabscheider für automatische Maschinen für Pulverbeschichtungsanlagen hoher Wirkungsgrad antistatische Option Option Bajonettanschluss POWDER COATING BOOTH CARTRIDGE FILTERS Filters made of 100% pure polyester. Available standard sizes; 320x600mm 320x650mm 320x1000mm 320x1200mm Available polyester filter media density; 160 g/m2 200 g/m2 260 g/m2 Demands of different sizes and specifications can also be manufactured.

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

POWDER COATING LAB HAND GUN

POWDER COATING HAND GUN Cost effective and long life cascade Made in Turkey

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGE Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change  ...

AUTOMATISCHE PULVERBESCHICHTUNGSANLAGE Einbrennofen - Gas-, Diesel- oder Elektroantrieb Pulverbeschichtungskabine - Monofarb- oder Zyklontyp - einfacher Farbwechsel Pulverbeschichtungsanlage - manuelles oder automatisches System - Wagner, Gema oder türkisch lokal Hängebahnsystem - Monorail oder Power&free Vorbehandlungslinie - chemischer Prozess je nach Produkt und Qualitätserwartung Wir bieten die beste technische Lösung mit bester Qualität und wettbewerbsfähigem Preis. Deutschsprachiger Area Manager in Deutschland verfügbar. Kontaktieren Sie uns für weitere Informationen und Angebote. VOGAMAKINA Ltd. infovogamakinacom ---------------------------------------------------------------------- --------- AUTOMATIC POWDER COATING PLANT Curing oven - gas, diesel or electric source Powder coating booth - Mono-color or cyclone type - easy color change  ...

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. infovogamakinacom

General SKUR1114 LocationBarneveld MakeManesty (UK) TypeAccela-Cota 10 No.7 Q 178 Year of constructionunknown Main Features MaterialStainless steel Inlet diameter600 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Pan diameter600m Pan depth400mm Cylindrical width260mm Conical width140mm In-/Outletdia. 280mm Motorcheck With frequency controllercheck With electric heatingcheck With fancheck Motor0.18 kW 220/380 Volt With spraying armcheck With dosing pumpcheck Information With switchcheck Weight930 Kg Floorspace1,8x1,3M Total height2,1 MCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...

General SKU246N193 LocationBarneveld MakeJorgen Jorgensen Maskinfabrik A/S TypeJorgensen-4 Main Features MaterialStainless steel Motor0.7 KW Inlet diameter700 mm Specified Features - Coating pan MaterialStainless steel Coating installationcheck Pan diameterdia. 700mm Pan depth350mm In-/Outletdia. 400mm Pan can be tiltedcheck Motorcheck With variable speed drivecheck Pan speed13-25 Rpm With electric heatingcheck With fancheck Capacity15-50 KG Motorcheck With spraying armcheck With dosing pumpcheck Motor0,18 KW, 380 Volt Information Mounted on framecheck With switchgearcheck Floorspace1,8 x 1,2 M Total height1,7 M Weight560 KGCoating pansJorgen JorgensenCoating pans > Coating pansBrand > Jorgen Jorgensen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU300U599 LocationBarneveld MakeDriam TypeDriacoater 500/600 vario No.KD37310 Year of construction1995 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Coating pan MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Coating pancheck Coating installationcheck Capacitymax: 1: 77 Ltr., 2: 148 Ltr. Batch size30 kg Pan diameter1: 500 mm, 2: 600 mm Pan depth1: 460 mm, 2: 600 mm Cylindrical width1: 330 mm, 2: 470 mm Conical width1: 120 mm, 2: 120 mm In-/Outletdia. 200 mm Motor0,55 kW, 230/400 volt (EX) With frequency controllercheck (Typ VLT 2015) Pan speed5-27 rpm With electric heatingcheck With fancheck Motor2,2 kW, 380/660Volt, 2825 rpm (EX) With air filtercheck With spraying armcheck (Model 970) With dosing pumpcheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight850 kg CEche ...

General SKU300U585 LocationBarneveld MakeLödige TypeLHC 25/30 No.14986 Year of construction2001 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter130 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Capacity2.5 Ltr Batch size2,5 Ltr. Pan diameter300 mm Pan depth313 mm Cylindrical width125 Conical width50 In-/OutletDia: 130mm Motor0,55kW (240/380 V) 1360/47rpm With frequency controllercheck Pan speed3-20 rpm With electric heatingcheck 4kw, 100-120°C With fancheck Capacity150 m³/h, Motor2,2 kW (230/400V), 2820rpm With air filtercheck With spraying armcheck With dosing pumpcheck Verderlab CD-70 Motor0.03 kw Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck Weight690 kg CEcheck Floorspace1.7 x 0.9 m Total height1.5 m Extra SpecificationsThis machine is supplie ...