he used for sale

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery

Debag Backcombi Dila + Helios consisting of Debag Dila+ Helios+ fermentation cabinet Debag Dila for 5 sheets 60x40cm -Built 08/2011 -12.6 kW -Door stop on the left -Debag Helios 4060 E -Bj: 08/2011 -4.0 kW

Plus version Size 36 x 52 cm Weko powder spray Conventional dampening Cleaned and checked .

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price

HENRY SØBY CR200 Brand:HENRY SØBY Type:CR200 Stock number:M21-1276 Cooling capacity:390 kW Application:Freezing Displacement:1,997 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:132 kW Weight:2,500 kg Year:1984 Number in stock:1 piece(s) Price:Quotation Request Description: An ammonia Henry Søby booster screw compressor unit with Unisab 3 controller and an oil separator (1082 liters). Mentioned capacity at an evaporating temperature of -40°C and a condensing temperature of -10°C. Visit also our website: used-refrigeration

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

suitable for XL 105, SM / CD 102, can be converted to standard feeder, Preset or Preset Plus feeder

Hermann Waldner stainless steel mobile vessel, jacketed for heating/cooling, total internal volume 60 litre, total jacket volume 20 litre, permitted internal vessel operating temperature max.150ºC, permitted jacket operating temperature max. 150ºC, permitted operating pressure inside max. 0 bar, permitted operating pressure in jacket max. 3 bar, bottom outlet, mobile on wheels, vessel height approx. 1000 mm, vessel outer diameter approx. 650 mm, vessel inner diameter approx. 500 mm

Technical data : Bandwidth / strip width 1,350 mm Strip thickness / strip thickness 0.4 - 4.0 mm Coil weight 10,000 kg Speed / speed 15 m/min. Coil inners / coil inside 508 mm Coil outer / coil outer- x 1,800 mm Distance ground & reel mpine center / Distance bottom and center of reel mandrel 1,200 mm Imposition ratio / reduction ratio 1:2 Low-return / press arm Deportation sign / push-off sign

M. No.: T 143 303 N Format: A4 Number of colors: 1

Heidelberg S Cylinder

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

The vessel is purposed for the mixing of liquids, it is cylindrical shape with dish type top and bottom. All product contact parts are manufactured from stainless steel AISI 316L or AISI 316Ti. Internal surfaces have finish of 320 grit, polished, with Ra = 0,4 µm, welds are ground down smooth and buffed. External surfaces have finish of 120 grit, Ra = 1,6 µm, welds are ground down. The vessel is fitted with 3pcs stainless steel legs made from AISI 304 . Comes equipped with top mounted motor and three-bladed propeller agitator for even mix and for keeping products homogenous - agitator propeller mixing element type with shaft and drive. Mixer is in overall excellent condition – little use, serviced and well looked after. Technical characteristics: · Net capacity: 1000 litre · Total volume: 1200 litre · Working volume: 1000 litre · Working tempe ...

- Standard - Numbering unit - with the existing accessories

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

With 55 kW Electrical motor and frame

We offer you here a used pallet rack traverse of the manufacturer Jung Heinrich for sale. Technical data on the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 85 x 40 mm Truss type: GN85x41 Agraffe: 5 HK (hook) clear width: 2,775 mm load per pair of trusses 1,023 kg at the same. distributed load 02x locking pins, used Version: kompl. galvanized To secure the longitudinal beams against unintentional lifting out

Heidelberg CPC 2.01, Machine No.448 Description: Heidelberg Densitometer For measuring and automatically setting the color zones for all Heidelberg models Can be connected to multiple machines at the same time characteristics Spectrophotometric measurement. The measurement results are logged. The controller determines the deviations from the predefined reference values and automatically tells the operator which settings are required. These can be transferred online to the printing machine, which then regulates the color zones in all printing plants at the same time and thus enables a consistently high printing quality.

Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!

saw blade diameter: 70 - 230 mm sawblade width: 12 mm hole of sawblade: 10 - 50 mm grinding wheel diameter: 120 mm grinding wheel width: 6 mm grinding wheel hole diameter: 32 mm no. of teeth: 30 - 400 total power requirement: 0,33 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,70 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed track 1,300 mm Quill diameter 250 mm ...

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX610 Profile Dimensions: 76.2 x 63.2 x 1.8 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,250 mm Depth: 1,050 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request

x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 920 mm turning diameter over slide rest: 600 mm turning length: 12000 mm loading capacität: 20 tons turning speed range: 3,6 - 172 U/min volt: 380 V total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Completely new HEINZMANN STG 40-14

HEIDELBERG Nela Plate Bending suitable for HD SM 52 / 74 /102 and XL machines different years of construction available

HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available

DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...

This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...

HEIDELBERG SPEEDMASTER XL 106 4+L 4 Colours offset press from 2018 by #ppmachinery Excellent Heidelberg XL press like new presented by PP Machinery This nice press with low impressions will be available soon. Please consider to contact us for more information or an inspection. Manufacturer: Heidelberg Druckmaschinen Type: Speedmaster XL 106-4+L Year of production: 2018 Imprints on counter: 88 Mio. sheets Max. sheet size 750mm×1,060mm (29.53in×41.73in) Min. sheet size (straight printing) 340mm×480mm (13.39in×18.90in) Thickness (straight presses) 0.03mm–1.00mm (0.0012–0.0394in) Gripper margin 11mm(0.43in) (10mm–12mm) (0.39in–0.47in) Max. speed: 18,000 sheets/h Please contact us for more information or an inspection

The reverse osmosis system is used for the desalination of softened water with a salt content of up to 1,000 mg/l. It is equipped with a high-quality centrifugal pump with frequency converter (FU). Frequency control reduces electricity costs by 30 - 50 %, extends the life of the system and keeps permeate production constant regardless of operating pressure. The RO digital microprocessor control enables fully automatic operation with logging of all relevant operating data and freely adjustable limit values. The system can be connected to the central control system via optional interfaces. Advantages : Equipping with FU saves 30 - 50 % on electricity costs, keeps permeate production constant and enables longer service life and particularly quiet operation Versatile RO digital control with storage, operating data and many setting options Optional equipment with PLC Siemens S7-1200  ...

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...

Offer Heinzmann Pandaros for sale.