hb used for sale

Description: Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle taper MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 m weight approx.: 95 kg, Approx. Onsite Dimension. (l x w x h): 660 x 800 x 1,700 mm

Description: Stone and belt grinding machine Motor power 900 watts. Speed 2950 rpm. Dimensions of whetstone 200 x 32 x 30mm. Dimensions grinding belt 100 x 915 mm. Packaging sizes 62 x 54 x 30 cm. Weight 35 kg. Approx. Onsite Dimension. (l x w x h): 620 x 540 x 300 mm, weight approx.: 35 kg

Description: Polishing machine Motor power 750 watts Diameter of polishing wheels 200 mm. Wheel size 16 mm. Speed 2950 rpm. Approx. Onsite Dimension. (l x w x h): 620 x 320 x 340 mm, weight approx.: 18 kg

Description: The rope hoist is supplied as standard with: Bracket for suspension Remote control with up / down. Emergency stop. Load capacity in kg 800/400 kg Stroke 6/12 mm Lifting speed 5/8 m / min Power 1.25 kw Connection voltage 230 V. Weight 21 kg Dimensions L x W x H 420 x 180 x 280 mm Approx. Onsite Dimension. (l x w x h): 420 x 180 x 280 mm, weight approx.: 21 kg

Description: Tool case with 599 movement. See pictures. Number of tools 599 pcs. Weight 12.5 kg Dimension L-B-H 375 x 215 x 525 mm Approx. Onsite Dimension. (l x w x h): 375 x 215 x 525 mm, weight approx.: 12,5 kg

Description: Tool trolley with 7 drawers. Tool Trolley has two normal and two swiveling wheels with brake. Through an integrated lock fully lockable tool trolley. Drawers can be locked for each subject. All drawers equipped with quick release and soft close. Tool trolley is equipped with 196 pcs tool parts.: 3 pcs Socket sets: 1/4 'by 4 - 14mm, 3/8' from 6 - 22mm and Torx E10 - E20, 1/2 'from 8 - 32mm.. Various screwdriver sets. Extension for socket sets, various Allen key from 1 - 10mm, different files. Ratcheting wrench set of 6 - 22mm, wrench set of 6 - 22mm. Forceps assortment. Dimensions 78 x 48 x 105 cm. Weight 79.5 kg. Approx. Onsite Dimension. (l x w x h): 765 x 465 x 960 mm, weight approx.: 84 kg

Description: Tool trolley with 7 drawers. Tool Trolley has two normal and two swiveling wheels with brake. Through an integrated lock fully lockable tool trolley. Drawers can be locked for each subject. All drawers equipped with quick release and soft close. Tool trolley is equipped with 196 pcs tool parts.: 3 pcs Socket sets: 1/4 'by 4 - 14mm, 3/8' from 6 - 22mm and Torx E10 - E20, 1/2 'from 8 - 32mm.. Various screwdriver sets. Extension for socket sets, various Allen key from 1 - 10mm, different files. Ratcheting wrench set of 6 - 22mm, wrench set of 6 - 22mm. Forceps assortment. Dimensions 78 x 48 x 105 cm. Weight 79.5 kg. Approx. Onsite Dimension. (l x w x h): 765 x 465 x 960 mm, weight approx.: 84 kg

Description: The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ', 3/8', 1/2 '. Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. Approx. Onsite Dimension. (l x w x h): 780 x 480 x 1,050 mm, weight approx.: 78,5 kg

Description: Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4' premium ratchet. 1/4' knee joint 45 mm. 1/4' extension 100mm. 1/4' socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4' long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8' premium ratchet. 3/8' knee joint 55 mm. 3/8' extension 150mm. 3/8' socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8' long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2' premium ratchet. 1/2' knee joint 75 mm. 1/2' extension 125mm. 1/2' Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2' Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 ...

Description: Workshop trolley filled with 274 quality tools. With 7 drawers and 1 door Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 4 heavy duty wheels 125 x 50 mm. 2 swivel castors with brakes, 2 keys. Dimensions L-W-H 1045 x 5050 x 1010 mm Weight 100 kg Approx. Onsite Dimension. (l x w x h): 1,045 x 505 x 1,010 mm, weight approx.: 100 kg

Description: Rated power 2.6 / 3.0 KW Rated current 16/8.3 amps Output voltage 2 x 230AC / 1 x 12 V/DC Tank volume 18 l Engine power 6.5 hp Machine weight approx. 45 kg Space requirement approx. 0.68 x 0.58 x 0.54 m Approx. Onsite Dimension. (l x w x h): 700 x 600 x 550 mm, weight approx.: 45 kg

Description: Tool trolley with 7 drawers. Tool Trolley has two normal and two swiveling wheels with brake. Through an integrated lock fully lockable tool trolley. Drawers can be locked for each subject. All drawers equipped with quick release and soft close. Tool trolley is equipped with 196 pcs tool parts.: 3 pcs Socket sets: 1/4 'by 4 - 14mm, 3/8' from 6 - 22mm and Torx E10 - E20, 1/2 'from 8 - 32mm.. Various screwdriver sets. Extension for socket sets, various Allen key from 1 - 10mm, different files. Ratcheting wrench set of 6 - 22mm, wrench set of 6 - 22mm. Forceps assortment. Dimensions 78 x 48 x 105 cm. Weight 79.5 kg. Approx. Onsite Dimension. (l x w x h): 765 x 465 x 960 mm, weight approx.: 84 kg

Description: Mounting Band Saw: Cutting area at 90 degrees: around 125 mm Cutting area at 90 degrees: square 125 mm Cutting area at 90 degrees: rectangular 127 x 125 mm Saw blade dimensions 1435 x 12.7 x 0.6 mm Belt speed 38 - 80 m / min Total power requirement 0.95 kW Machine weight approx. 18 kg Dimensions L x W x H 720 x 380 x 450 m Approx. Onsite Dimension. (l x w x h): 720 x 380 x 450 mm, weight approx.: 25 kg

table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic depalletizer for glass bottles Capacity: 15,000 bottles/hour for 330-500 ml User-friendly and customizable software for every requested product and every need. Minimal downtime: Our depalletizer can be quickly adapted to new products, size changes or product types. Semi-automatic "push" depalletizer for pallets with layers of glass bottles, cans or other types of containers with two-column gantry structure, mobile centering device, intermediate table and transfer trolley. On request, our machine can work fully automatically, which leads to a high production rate. The machine includes; Layer movement unit Pallet conveyors (motorized) Fuse box HMI – Keyboard and display with auto-programming functions Pneumatic system Protective grilles (metal nets) Equipment Operating status of the machine Technical Documentation The devices are compliant with and compl ...

Stud welding machine make HBS type Rotamat 800Machine -No: 511433 Year 2004Welding machine for welding hollow cylindrical fasteners with magnetically moved arcWelding range: M 4 - M 12Welding material: unalloyed, low-alloyed and high-alloyed steelWelding sequence: up to 20 pcs. / Min.Welding time: 5 - 990 msWelding current: 300/400/550/800 AConnected load: 380 V / 50 HzWeight approx: 48 kgOutside dimensions approx: 490 x 320 x 250 mmWith- Gas connection- Ground cable- Welding gun PMH 70 (with lift ignition)- Welding pistol A 12Performance nuts: from M 6 to M 12Welding of threaded sleeves and bushings made of steel and stainless steel possiblevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

0: 680 x 450 x 430 mm operating pressure: 3 - 6 bar Air consumption: 250 l/min. weight of the machine ca.: 28 Kg : 0,76 x 0,5 x ,75 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 200 / 175 L/min Receiver capacity: 50 Liter weight of the machine ca.: 77 kg. Number of cylinders: 4 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 580 x 780 x 820 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1015 mm material thickness: 1 mm speed: von Hand weight: 240 Kg dimensions: 1420 x 600 x 750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 85/120 L/min Receiver capacity: 10 l / 8 bar l / bar weight of the machine ca.: 21 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 465 x 3800 x 575 mm This compressor is delivered as standard with: - Maintenance-free oil-free engine. - safety valve. - Reduction valve with pressure gauge and clutch. - Drain tap on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 150 mm height: 80 mm centre height: 105 mm weight of the machine ca.: 18 kg dimensions of the machine ca.: 300 x 80 x 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 745 x 525 x 915 mm weight: 93,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HBM SAEULENBOHRMASCHINE TYPE Z5040E - MK4 - Electromagnetic automatic voeding - 50/1450 t/m - Draait right-hand-leftom - Tapfunctie - Uitlading 180 mm - Table 560 x 560 mm - Tandwielaangedreven - Koeling - Beschermkap - Noodstop - Verlichting - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 140 mm turning speeds: 50 - 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 580 kg range L-W-H: 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IGBT Technology, 200A inverter with digital display

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

IGBT Technology, 200A inverter with digital display

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

Equipped with aluminum case, 66-piece milling set

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.

width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 mm work table:: 170x125 / 265x150 mm total power requirement: 0,5 kW weight of the machine ca.: 26 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

IGBT Technology, 200A inverter with digital display

0: 2060 x 1270 x 860 mm operating pressure: 2,5 - 8,0 bar air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,23 t dimensions: 2,08 x 0,73 x 0,8 m Duo blast cabinet 10 PET sheets to protect the windows 10 PET sheets to protect the fluorescent lighting 2 foot pedals 2 jet guns 6 ceramic nozzle inserts (6 mm diameter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 800/400 kg stroke: 6/12 mm stroke speed: 5/8 m/min output: 1,25 kw connected load frequency: 230 V weight: 21 kg dimensions: 420 x 180 x 280 mm Due to the low installation height, the maximum lifting height remains available. Control with emergency stop. (required by law) Suspension with safety hook. Overload protection with slip clutch. Built-in limit switch. Collection bag for chain. Control console with 1.6 m cable. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IGBT Technology, 200A inverter with digital display