british flag
Resale Logo

hauser used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information specialist for heavy duty machine tools and complete production lines  Walter Kames GmbH  http://www.kames.de 
banner logo
start page > keywords hauser > results
202 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11
121028591 701  

ALFA LAVAL 4.500 KG/H Blocks for sale
Chester cheese production plant


A 3 127 The complete Cester-Cheese production is controlled from one control room, working there is 1 person per shift. Capacity is approx. 4.500 kg Chester cheese in block form Pos. 1 3 cheese producti ...
used machine
 
A 3 127

The complete Cester-Cheese production is controlled from
one control room, working there is 1 person per shift.
Capacity is approx. 4.500 kg Chester cheese in block form
Pos. 1
3 cheese production plant
content: 15.000 litre per cheese production plant
connected with a stage to customer the 3 cheese
maker plant.
Under the stage between cheese maker 7 and 6
is installed:
a inductive milk flow meter from Endress und Hauser
2 centrifugal pumps from Koch and Pasilac
1 membrane positive pump for cheese curd and whey
mixing to the Damerow curd drainage plant
Measurements from the cheese maker:
length 4,74 m, breadth 3,20 m, high 3,47 m

Pos. 2
1 plate heater with one plate section
manufacturer is Südmo-KMA
KS 35 FO-353, Manufacturer year is 1998

Pos. 3
1 smal dosing pump with a small round balance
tank, to dose salt solution

Pos. 4
1 air conditioner plant with hose ventilator

Pos. 5
1 pipe conncetion plate with electronic
connection control

Pos. 6
Under the cheese maker plants is installed
1 Alfa Laval drainage conveyor to dry the cheese curd,
what is coming from the KF cheese maker vessels.
The cheese curd will be distribute to a thick cheese
curd cake.
In the end of this drainage conveyor the closed cheese
curd cake will be shredded.
Over a outside standing salt silo tank will be dosing
dry salt into the shredded cheese curd directly in the
outlet of the Alfa Laval drainage conveyor.
Measurement of the Alfa Laval drainage conveyor plant is:
length 13,2 m, breath 3,70 m, high 2,90 m

Pos. 7
The shreded cheese curd will be transported with a
worm conveyor into a cheese curd production vessel.
In this vessel the shreds of chester cheese will by dry
to the rest and the salt will be mixed with the stirrer
of the cheese vessel. During this mixing of the
chester cheese the shreds will be arrive a smaller form
The vessel, where the chester cheese shred get a
smaller size through the stirrer, has following measurements:
diameter or length; 4,31 m

Pos. 8
1 slanting installed worm conveyor transport the chester
cheese shreds and rest whey from the cheese curd outlet
to the inlet of a rectangular constructed balance tank with
sieves.
With the sieves in this balance tank we separate whey
from the Chester cheese shreds, before we transport
the dry cheese shreds in the chester cheese in a round
vacuum tank.

Pos. 9
After the filtration of rest whey the chesse shreds will be
transport from the rectangular drainage vessel into a
round constructed vacuum vessel. From this vessel
we transport with a batch vacuum sucking plant the
cheese shreds into a Caseomatik drainage and cheese
forming plant.

Pos. 10
4 rectangular constructed chester cheese curd drainage
and cheese forming columns.
Total high is 6,54 m.
The formed Chester cheese block have following
measurements: 36.5 cm x 28,5 cm x high 19 cm
The space requirement of the 4 columns is:
4 x 8 m, high 6,54 m
In the bottom half of the 4 columns the pressed
Chester cheese is put out with a hydraulic cylinder
and will be packed in blue Chester cheese ripening bags.
This work is done by hand half automaticly.
The still open ripening bag with the Chester cheese block
will be transport with a conveyor to the half auomaticly working
vacuum packaging machine.

Price up standing place: 182.600,00 Euro






1998
182,600 €  
    request
120999977 101

HAUSER B 3 DR for sale
Jig Boring Machines


Jig boring machine - vertical HAUSER B 3-DR-Nr. 1105-02312 brand HAUSER type B 3-DR built 1985 State second-hand machine control conventional storage HAGUENAU country of origin Switzerland delivery immediately cargo base ...
used machine
 
Jig boring machine - vertical HAUSER B 3-DR-Nr. 1105-02312 brand HAUSER type B 3-DR built 1985 State second-hand machine control conventional storage HAGUENAU country of origin Switzerland delivery immediately cargo base free truck more details on request



Technical details of spindle diameter 85 mm x way 400 mm y-way 300 mm z-way 450 mm 600 X 380 mm clamping surface hydr. Motion / fast motion 2500 m / min.
Clamping cone outside CM 0 speed 3000 rpm description with 2 axes - digital, tools
1985
3,500 €  
    request
120999964 104

HAUSER 3 SM for sale
Jig Grinding Machines


1982
5,500 €  
    request
120960102 302

REIFENHÄUSER SR 160 for sale
pipe-saw


According to the description below
used machine
 
According to the description below
1973
Price  
    request
120960046 104

HAUSER 5SM-DR for sale
Jig Grinding Machines


The type of HAUSER 5SM-DR # 1157 series 116 • Table 770x900mm • Table travel 700 mm • Rotary table fi 600 mm • Rotary table fi 310 mm • travel szllifierskiej head 500 mm • a switch beam 500 mm • max  ...

 
The type of HAUSER 5SM-DR # 1157 series 116
• Table 770x900mm
• Table travel 700 mm
• Rotary table fi 600 mm
• Rotary table fi 310 mm
• travel szllifierskiej head 500 mm
• a switch beam 500 mm
• max height under beam 750 mm
• clearance between columns 800 mm
• positioning accuracy 0.0003
• The minimum stroke 0.001 mm,
• Max diameter 220 mm ground with a 280 mm
• Read the X and Y axes 6-digit ELESTA
• Max taper angle cut 16stopni
• Grinding Heads with electric and pneumatic
• Holder for mounting grinding wheels
• A lot of grinding and discs mostly TYROLIT
 
Price  
  PL   request
120916961 2305

ENDRESS + HAUSER ILE 61 for sale


Capacity : 60 t/h Fabr-nr: 8500564
used machine
 
Capacity : 60 t/h
Fabr-nr: 8500564
1985
Price  
  NL   request
120190999 302

DIVERSE diverse for sale
Extruding lines


Plant Full collection and extruder gravimetric brand CMG mono-layer, 200 head, 1600 collection steps in Mount 1200, thickness control rotating swing Syncro, year of construction 1997 Plant B Full automatic collection  ...

 
Plant
Full collection and extruder gravimetric brand CMG mono-layer, 200 head, 1600 collection steps in Mount 1200, thickness control rotating swing Syncro, year of construction 1997
Plant B
Full automatic collection extruder MACCHI, Coex 3 layers with each layer 3 + hopper for gravimetric, cooling ring Reifenhauser, head 300, 1800 collection, year of manufacture 2004
Plant C-30 Garbaplast monolayer, head Extruder
Facility d: Extruder CMG, 100 head
Plant and-extruder CMG – without head
Plant F-80 chain 30, Tecom, head Extruder
Plant G-20 chain 20, Tecom, head Extruder
Plant Plant plant H – 2 Tecom, head in good condition
The plant – Printer Filippini e Paganini with 140 M-printer online Plant collection Manzoni, 80 passage

We are looking for expressions of interest in the figure shown as to be received by 14 November 2017
For more information contact us at 035-4284671/030-7751645
 
190,000 €  
  IT   request
118116444 308

REIFENHÄUSER KK4 for sale
Blown Film Plant


Film Plant includes: (1) Extruder REIFENHÄUSER RT 81: Screw diameter: 50mm, motor power: 45mW max., rotational speed: 1100/min max., weight: 1.2t, number of machines: 3 (2) Blow Film Nozzle: Diameter: 200mm, nozzle gap: ...
used machine
 
Film Plant includes: (1) Extruder REIFENHÄUSER RT 81: Screw diameter: 50mm, motor power: 45mW max., rotational speed: 1100/min max., weight: 1.2t, number of machines: 3 (2) Blow Film Nozzle: Diameter: 200mm, nozzle gap: 1mm, 2mm, external blow cooling (3) Outlet Unit: Speed: 100m/min, roll width: 1400mm (4) Winder: Speed: 100m/min max., material: PE, PP, foil thickness: 20-200µm, output: 150kg/h, length: 15000mm, width: 6000mm, height: 8000mm, weight: 20-25t.
1984
Price  
  DE   request
116581373 101

HAUSER 5SM for sale
Coordinates Grinding


Coordinate grinding machine Manufacturer: Hauser Type: 5SM Year of construction: 1971 CNC control: HEIDENHAIN Positip 855 / retrofit Working range: 700 x 500 mm
used machine
 
Coordinate grinding machine
Manufacturer: Hauser
Type: 5SM
Year of construction: 1971
CNC control: HEIDENHAIN Positip 855 / retrofit

Working range: 700 x 500 mm
1971
Price  
  DE   request
111759026 504

NEUENHÄUSER L2 for sale
rkufenmobiles star screen


Star screen L2 new Hauser Super screen for the biomass treatment and recycling of home, rest - and commercial waste,. as well as screening of sand, gravel, and other mineral materials Manufacturer: Neuenhauser Maschin ...
used machine
 
Star screen L2 new Hauser Super screen
for the biomass treatment and recycling of home, rest - and commercial waste,.
as well as screening of sand, gravel, and other mineral materials
Manufacturer: Neuenhauser Maschinenbau GmbH
Year of manufacture: 2007
Hours of operation 5359 hours
Stationary electric star screen
Star deck completely renewed
Central lubrication system
Electric Actuator 90 kW
The screen size is 0-40 mm,
Star deck speed can be continuously adjusted.

With the speed of the stars, one finds also the required screening.
Example: The performance with shredded waste wood is approx. 200 m ³ / h input
2007
Price  
  DE   request
110447501 104

HAUSER 3 SMO for sale
Jig Grinding Machine


Table size: 595x320mm, adjustment area: 400x250mm, grinding diameter: 220mm, grinding diameter with intermediate plate: 280mm, includud angle: 12°, vertical sledge stroke: 500mm, grinding motor table passage: 480mm, spi ...
used machine
 
Table size: 595x320mm, adjustment area: 400x250mm, grinding diameter: 220mm, grinding diameter with intermediate plate: 280mm, includud angle: 12°, vertical sledge stroke: 500mm, grinding motor table passage: 480mm, spindle vertical sledge distance: 310mm, vertical spindle stroke: 3-110mm, stroke speed: 5-330/min, grinding motor speed: 9000-80000/min, length: 1700mm, width: 1500mm, height: 2900mm, weight: 1.8t.
1969
Price  
  DE   request
106209476 104

HAUSER S3-CNC311 for sale
Jig Grinding Machines


Coordinate grinding machine Manufacturer: Hauser Type: S3-CNC311 Year of construction: 1985 CNC control Adjustment range X axis (table slides): 400 mm Y-axis (cross slide): 250 mm W axis (grinding head): 450 mm ...
used machine
 
Coordinate grinding machine
Manufacturer: Hauser
Type: S3-CNC311
Year of construction: 1985
CNC control

Adjustment range
X axis (table slides): 400 mm
Y-axis (cross slide): 250 mm
W axis (grinding head): 450 mm

Feed speed
X/y axis: 0-1500 mm / min
W-axis: 900 mm / min

Table area: 600 x 380 mm
Table load: 300 kg

1985
Price  
  DE   request
105019990 701

ALFA LAVAL Caseomatic Block Portionierung for sale
Chester cheese produktion


A 3 127 The complete Cester-Cheese production is controlled from one control room, working there is 1 person per shift. Pos. 1 3 cheese production plant content: 15.000 litre per cheese production pl ...
used machine
 
A 3 127

The complete Cester-Cheese production is controlled from
one control room, working there is 1 person per shift.

Pos. 1
3 cheese production plant
content: 15.000 litre per cheese production plant
connected with a stage to customer the 3 cheese
maker plant.
Under the stage between cheese maker 7 and 6
is installed:
a inductive milk flow meter from Endress und Hauser
2 centrifugal pumps from Koch and Pasilac
1 membrane positive pump for cheese curd and whey
mixing to the Damerow curd drainage plant
Measurements from the cheese maker:
length 4,74 m, breadth 3,20 m, high 3,47 m

Pos. 2
1 plate heater with one plate section
manufacturer is Südmo-KMA
KS 35 FO-353, Manufacturer year is 1998

Pos. 3
1 smal dosing pump with a small round balance
tank, to dose salt solution

Pos. 4
1 air conditioner plant with hose ventilator

Pos. 5
1 pipe conncetion plate with electronic
connection control

Pos. 6
Under the cheese maker plants is installed
1 Alfa Laval drainage conveyor to dry the cheese curd,
what is coming from the KF cheese maker vessels.
The cheese curd will be distribute to a thick cheese
curd cake.
In the end of this drainage conveyor the closed cheese
curd cake will be shredded.
Over a outside standing salt silo tank will be dosing
dry salt into the shredded cheese curd directly in the
outlet of the Alfa Laval drainage conveyor.
Measurement of the Alfa Laval drainage conveyor plant is:
length 13,2 m, breath 3,70 m, high 2,90 m

Pos. 7
The shreded cheese curd will be transported with a
snoke conveyor into a cheese curd production vessel.
In this vessel the shreds of chester cheese will by dry
to the rest and the salt will be mixed with the stirrer
of the cheese vessel. During this mixing of the
chester cheese the shreds will be arrive a smaller form
The vessel, where the chester cheese shred get a
smaller size through the stirrer, has following measurements:
diameter or length; 4,31 m

Pos. 8
1 slanting installed snoke conveyor transport the chester
cheese shreds and rest whey from the cheese curd outlet
to the inlet of a rectangular constructed balance tank with
sieves.
With the sieves in this balance tank we separate whey
from the Chester cheese shreds, before we transport
the dry cheese shreds in the chester cheese in a round
vacuum tank.

Pos. 9
After the filtration of rest whey the chesse shreds will be
transport from the rectangular drainage vessel into a
round constructed vacuum vessel. From this vessel
we transport with a batch vacuum sucking plant the
cheese shreds into a Caseomatik drainage and cheese
forming plant.

Pos. 10
4 rectangular constructed chester cheese curd drainage
and cheese forming columns.
Total high is 6,54 m.
The formed Chester cheese block have following
measurements: 36.5 cm x 28,5 cm x high 19 cm
The space requirement of the 4 columns is:
4 x 8 m, high 6,54 m
In the bottom half of the 4 columns the pressed
Chester cheese is put out with a hydraulic cylinder
and will be packed in blue Chester cheese ripening bags.
This work is done by hand half automaticly.
The still open ripening bag with the Chester cheese block
will be transport with a conveyor to the half auomaticly working
vacuum packaging machine.

Price up standing point: 162.6000,00 Euro





1998
162,600 €  
  DE   request
102651014 1200  

ENDRESS HAUSER T-Mass AT 533 for sale
flow meter


hardly used from Forschungsberieb tested at Endress Hausser and calibrated with certificates
used machine
 
hardly used from Forschungsberieb
tested at Endress Hausser and calibrated with certificates
1995
499 €  
  DE   request
100861217 1200  

ENDRESS HAUSER T-Mass AT 533 for sale
flow meter


as good as new
used machine
 
as good as new
1995
999 €  
  DE   request
94761568 2500

ENDRESS + HAUSER Promag A DN 15 for sale
Magnetic inductive flowmeter ProMag A


used machine
 
 
Price  
  DE   request
91028553 706  

GILLAIN Diverse for sale
Brewhouses (compact)


Devices brewhouse, Fabr. Gillain, 15-25 hl, in VA, mash - wort Kettle / whirlpool steam heated 4 internal boiler, agitator blades in VA, and lauter tun with VA hack work, VA lower ground, Marc shaft, with operating pla ...

 
Devices brewhouse, Fabr. Gillain, 15-25 hl, in VA, mash - wort Kettle / whirlpool steam heated

4 internal boiler, agitator blades in VA, and lauter tun with VA hack work, VA lower ground,

Marc shaft, with operating platform, control cabinet, Grist Mill, cold water tank 30 hl.

Hot water tank 30 hl heated, 2 plate heat exchanger, 1995/1996.
 
Price  
  CH   request
90749889 706  

DIVERSE Diverse for sale
Brewhouses (compact)


Three-unit brewhouse brewery block 2/4 HL - needed year: 2013

 
Three-unit brewhouse brewery block 2/4 HL - needed year: 2013
 
Price  
  CH   request
79948868 104

HAUSER 3SMO for sale
Jig Grinding Machines


Made in Switzerland, YOM 1988, travel X/Y 400/250 mm, table size 595 x 320 mm, 2 axis DRO, weight 2100kgs, price 4300 EUR.
used machine
 
Made in Switzerland, YOM 1988, travel X/Y 400/250 mm, table size 595 x 320 mm, 2 axis DRO, weight 2100kgs, price 4300 EUR.
1988
4,300 €  
  LT   request
79030013 302  

REIFENHAEUSER ju for sale
Blown film lines


Mono blowing head tool make Reifenhauser, used, rotating, die 400 mm diameter, for LD PE extrusion, without IBC, to give in good condition. Auch Folien + Technik e. Kfm. Staufenstraße 3 in D-73773 73773 Aichwald  ...
used machine
 
Mono blowing head tool make Reifenhauser, used, rotating, die 400 mm diameter, for LD PE extrusion, without IBC, to give in good condition.

Auch Folien + Technik e. Kfm.
Staufenstraße 3 in D-73773 73773 Aichwald
Tel. 0049-711-364341, fax 0049-711-363703
1999
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter