130,485 used machines on RESALE, but how to find them? Machine Search
Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear
Engine Brand: ARMSTRONG, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 62 Kw, Rated Speed: 2900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/armstrong-4104-pump-2720-l-min-used /17873, , = More information =, , Empty weight: 1.250 kg, Type number: 4104 pomp 2720 Lit/min
Engine Brand: VOLVO, Condition: RECONDITIONED, Nominal Power @ Nominal Rpm: 181 Kw, Nominal Rpm @ Nominal Power: 2300 Rpm, Engine Color: Green , Engine Condition: Rebuild , Turbo Type: Dry , Rated Power: 200 Kw, Rated Speed: 2300 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/stock/diesel-engines/volvo-tad750ve-recondition ed-longblock/42332, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 500 kg, Type number: TAD750VE
MÜLLER MARTINI 321 Saddle Stitching Line Year: 1992 Configuration: 5 × Feeders 1 × Stitching Unit (Muller Martini 321 Saddle Stitcher) 1 × Three-Knife Trimmer 1 × Stacker 2 × Compressors Including manuals Condition: In good working condition, available directly from our warehouse in 67269 Grünstadt, Germany. A reliable and well-maintained line, ideal for efficient saddle stitching and trimming operations. Ready for inspection and immediate use.
Engine Brand: CUMMINS, Condition: RECONDITIONED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Engine Condition: Rebuild , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: NO , Rated Power: 97 Kw, Rated Speed: 2300 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/cummins-qsf-3-8-cpl4787-re conditioned-longblock/42352, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 400 kg, Type number: QSF 3.8 CPL4787
Engine Brand: CATERPILLAR, Condition: CORE, Nominal Power @ Nominal Rpm: 328.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Bore: 130 mm, Stroke: 157 mm, Engine Capacity: 12500 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 2100 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 14500 Hour(s), Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 350 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c13-lgk-241380 4-core/42308, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.3 ...
Technical data of the pallet rack crossbar: Shelving system: SLP The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: grey INP profile: 100 x 50 mm Agraffe: 3 HK (hook) Clear width: 2,000 mm 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Properties: Volume 6130 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3700 mm Height 2560 mm Diameter width 1600 mm Surface inside 2B=IIIC ground Surface marbled on the outside 1 cold plate Digital temperature measurement Description Topsoil: Clapper bottom 2 crane eyes with central thread welding nozzle DN 100 to DN 40 with threaded nozzle DN 50 with fermentation valve DN 50 with check valve DN 50 Vent pipe DN 50 with threaded nozzle DN 50 and airlock DN 50 and T-piece 4 saddle feet Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CI ...
Properties: Volume 5200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3800 mm Height 2980 mm Diameter width 2550 mm Weight 500 kg Surface inside IIID Surface outside IIID marbled Description: Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable
Properties: Volume 5070 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3600 mm Height 2500 mm Diameter width 1500 mm Weight 400 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Subsoil: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 3 calotte feet, height-adjustable, with wash ...
Properties: Volume 3180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3600 mm Height 2530 mm Diameter width 1200 mm Weight 280 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description: Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Subsoil: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 3 calotte feet, height-adjustable, wit ...
Overhauled battery head 12 ltr in very good condition
Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3300 mm Height 2550 mm Diameter width 1200 mm Surface inside IIID Surface outside IIID marbled Description: Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable
Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen
max. wheel diameter: 1000 mm gear width: 180 mm max. module: 7 min. module: 0,5 min. ram stroke: 16 mm max. ram stroke: 180 mm table hole: 160 mm total power requirement: 4 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Granulator powder mixer with bolts LÖDIGE / LOEDIGE / LODIGE For wet granulation, without dehuller Year 1965, external dimensions (mm): 800x330 H 450 , Internal dimensions (mm): 175x180 H 173, Volume (L): 4
screw ø:: 70 mm screw length:: 22D screw speedl:: -- U/min Condition: used Specification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling Bath Consisting of: Extruder COLMEC 70 x 22D - Screw diameter: 70 mm - Screw length approx.: 22D - Extruder motor power: 37 kW - Cooling unit for extruder Hot air oven: - Hot air oven power: 80 kW - Fan power: 2x 0.36 kW, 2x 1.5 kW - Stainless steel cooling bath The system is in good condition and was still in operation until approx. 6 months ago - Sold as seen. The buyer is responsible for safety regulations. Without CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Leroy Somer Gearbox Art.Nr.: OT 3535 S BT V3 H CS Number: 6220577 Alice Code: 4595807 2940 rpm -NEW- More items - new and used - can be found in our shop! International shipping costs on request!
Key data: 48 KW, 60 kVA, 400 V
Execution: Category: Emergency Power Generator Stationary Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine type: F 6 L 912 Motor power: 56 KW Cooling: Air-cooled Starting: Electric 12 V DC Speed: 1500 rpm Fuel: Low sulphur fuel oil Emission standard: TA-Luft Technical data generator: Generator manufacturer: Stamford Generator Type: S1L2-Y Generator power: 60 kVA Generator current: 86.40 amps Short-circuit current: 259.2 amps Overload: 95.04 amps Voltage 400 / 231 Volt Voltage regulator: yes electronic AVR Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery set up Base frame tank with drip pan Capacity / litre: 1 ...
Manufacturer: Linsinger Type of Machine : CNC Saw Find more here - / Contact us at -
weight: 280 kg width: 930 mm depth: 560 mm height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ATR 3030 Hawker Life-Plus TC3-LP-10KW Smart Charger for Forklift Batteries 24 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbar: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP33 Clasp: 2 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 1,600 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
New Goedhart LLK.p 22x6x3900x50/50x(2x8)+ Freon evaporator. Please notice that we can deliver this evaporator with 4 suitable fans that have an diameter of 780 mm & the capacity is based on an airflow of 40.000 m³/h. Specifications: Brand: Goedhart Type: LLK.p 22x6x3900x50/50x(2x8) Capacity: 63,5 kW (Based on an airflow of 40.000 m³/h) Refrigerant: Freon Number of fans: 4 Fin spacing: 8 Sizes: 4450x1550x1410 mm (LxWxH) Surface: 338 m² Volume: 101 dm³ Weight: 590 kg
This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...
spindle passage: 375 mm turning diameter over bed: 1030 mm turning length: 1750 mm spindle bore: 375 mm max. turning diameter: 650 mm spindle turning speed range: 5- 500 U/min spindle motor: 45 / 37 kW Control: OSP P300 L x-travel: +330 / -140 mm z-travel: 2040 mm rapid traverse x + z axis: 5 / 10 m/min tail stock: tailstock quill diameter: 180 mm tailstock quill stroke: 200 mm taper in tailstock MT: MT 6 total power requirement: kW weight of the machine ca.: ca 23 t dimensions of the machine ca.: 7,1 x 3,2 x 2,85 m Cnc Oil Country Lathe CNC-controlled oilfield lathe For heavy-duty machining of large and heavy turned parts and pipe end machining - CNC Control OSP P300L - Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.) - Tool Revolver 12-fold (static Tools) - Chip Conveyor - Exhauster Power on: 20.538h , N/C Running Time: 2.270h Spindle Revolution Time: 2.287h, Cuttin ...
Omron Guard Lock Safety Door Switch D4NL - 2DFA - BS
E+K Bunker Dosing and Storage Bunker Vibration Bunker Dosing and storage bunker: Dimensions: LxWxH = 760 x 400 x 125 mm Automatic controller: Type: PiCo A1-3/B.7 230 V Hz 50/60 Hz Drive: LSF 90 Linear Vibratory Actuator Length: 669mm Internal dimensions in kg max 7.00 kg min 3.00 kg Connection to control unit only 230 Volt Hz 50 A: 1.00 Total dimensions LxWxH = 1020 x 400 x 360 mm More items - new and used - can be found in our shop! International shipping costs on request!
Key data: 250 t, 100 mm
Heavy-duty cylinder with two-stage pump Type SB -2504 - RO Series 365 Pressure 250 ton
Lippert belt conveyor GF 30000-750-600 RA2269 Technical data: Conveyor length (NL): 30000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 30000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0 ...
Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...
Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.
Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.
However, equipping the PNC 90-3A with three additional PNC/CNC-controlled auxiliary axes now enables a working area of approx. 900x1,100mm and thus an extremely economical production of large printed parts. - Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) - Processing unit KA (in front of the machine) - 4-fold tool changer Specifications: Blank diameter (max.): 900 mm Tip width : 1,100 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 45 kN Axis force (longitudinal) (max.): 45 kN Stroke (transverse): 305 mm Stroke (longitudinal): 650 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 300 mm Tailstock stroke: 450 mm Speeds (infinitely variable): 100-2,300 min-1 Main drive: 28 kW Hydraulic drive: 15 kW Operating voltage: 400 V Frequ ...
- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) - Double reel seat Specifications: Blank diameter (max.): 700 mm Tip width : 800 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-3,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 7,000 kg
- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg
- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg
- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33 ...
Key data: 5800 mm, 39000 mm, 1200 mm
Multiax L-Series CNC Gantry Milling Machine Large 5-axis gantry milling machine with moving-bridge and low-rail open design, ideal for machining long or oversized workpieces. Travels: X 5800 mm, Y 39000 mm, Z 1200 mm. Equipped with a high-speed spindle for machining composites, aluminum, plastics, wood and non-ferrous metals. The modular heavy-duty design offers high rigidity, precision and allows for easy loading and unloading by crane or forklift. Suitable for mold making, prototypes, marine and aerospace components, and large structural parts.
General SKU401X1198 MakeLytzen LocationBarneveld CEcheck TypeLDF-1760 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume1820 Ltr. Pressure1 Bar Specified Features - Autoclave Horizontal autoclavecheck (Dry Heat Sterilizer) Notified bodyLytzen A/S, Denmark Capacitymax. ± 1820 Ltr. Internal width1000 mm Internal depth1400 mm Internal height1300 mm Inlet/Outlet1300 x 1400 mm Max. temperature150 °C Electric heatedcheck Electric capacity30 kW Insulatedcheck MaterialStainless steel 1.4301 (304) Information No.A20191064 Year of construction2020 Mounted on stainless st. framecheck With switchcheck With switchgearcheck Floorspace1,6 x 1,4 m Total height2,3 m Weight1400 kg Extra Specifications Recirculation fan motor: 3.0 kW Overpressure fan motor: 0.16 kW Cooling method: air cooling through exhaust air exchange when the damper is op ...
Grinding wheel dimensions (od x id x width): Ø508 x Ø304.8 x 305 mm, Ø min/max to be rectified: 150 mm, Grinding wheel width: 305 mm, Maximum length to be rectified in plongeé: 305 mm, Drive wheel dimensions (OD x ID x W): Ø330 x Ø203 x 305 mm, Regulating wheel motor power: 4 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Long: 3.500 mm, Width: 2.500 mm, Tall: 1.100 mm, Weight: 6.500 Kg
HYUNDAI WIA SE 2200 LMSA CNC Lathe GENERAL Project No.: 905806 Quantity: 1 pcs. Manufacturer: HYUNDAI Type: WIA SE 2200 LMSA Control: HYUNDAI WIA Fanuc i-Series Year of Make: 2021 Condition: Used machine Spindle in approx (hrs): 2149 Program run approx. (hrs.): 4106 Approx. (hrs): 8655 DESCRIPTION TURN Max. turning diameter 300 mm Max. turning length 508 mm Max. circumferential diameter over bed 600 mm Max. chuck diameter 210/125 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 15/11 kW Spindle aperture main spindle 65 mm Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Max. speed sub-spindle 6000 1/min Max. power sub-spindle at ED 10-40/100% 7.5/3.7 kW Spindle Diffuser Sub-Spindle 32 mm Axes on the sub-spindle unit C/Z Blowing air through the sub-spindle Workpiece ejector in the sub-spind ...
Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 25,150 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Number of pallet spaces per row:162 pcs. Total number of pallet spaces: 162 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 500 kg The scope of delivery includes: 10x Pallet rack stand, used Material colour frame profile: blue Material colour truss: sendzimir galvanised Type: SKMO 5220 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 8,000 mm hi ...
Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper
Distance between centres: 1200 mm Speed: A) 70 - 380 U/min. turning speeds: B) 380 - 2000 U/min weight: 2,2 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
original Kodak laser head lift for TH3
length: 560 mm width: 700 mm height: 720 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 560 mm width: 730 mm height: 760 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 720 mm width: 730 mm height: 1150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
