haul used for sale

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Capacity: 230 kg Weight: 830 kg Lifting height: 6000 mm incl. battery and charger integrated

Haulotte Work Platform HA 32 PX Y.O.M. 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Special price

pressure: 63 t no. of strokes: 70-420 Hub/min sheet width: 160 mm ram - range of adjustment: 80 mm : 300 mm table surface area: 750x660 mm ram surface: 690x460 mm total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2500x2500x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t dayligth: 700 mm number of strokes adjustable: 30 - 180 min table-size: 1600 x 640 mm ram surface: 1440 x 950 mm distance between columns: 1600 mm hole in the table: 1300 x 350 mm ram adjustment: 100 mm daylight between the side columns: 640 x 700 mm stroke of ram - solid: 40 mm total power requirement: 30 kW weight of the machine ca.: 25 t dimensions of the machine ca.: ca. 3 x 2,3 x 4 m - With hydraulic overload - With shuttle table device Machinewill be partly recondition (with new paint, new cabinet) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haulotte Compact 10 scissor lift Working height 10,14m Platform length max:3,22m Machine width:1.2m Payload 450Kg

pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2330; Rear tyres remaining: 82; Front tyres remaining: 99; Inspection Date: 2023-03-21; Amount of previous owners: 1; Lift height[mm]: 814; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 2630; Rear tyres remaining: 65; Front tyres remaining: 92; Inspection Date: 2023-03-21; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300

; Gross weight [kg]: 4040; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450

Automatic punching machine double stand Pressure 125 ton Stroke 10 - 80 mm Stroke rate 50-300 1/min Stand width 1180 mm Table area 1150 x 850 mm Continuous opening in the table 1000 x 220 mm Plunger area 1210 x 550 mm Plunger adjustment 100 mm Material width feed 350 mm Material thickness - 6 mm Punching system incl. Feed Model RS 350 SL Levelers Kohler Reel

Working platform Haulotte Manufacturer Haulotte Type HA 32 PX built 2008 Only approx. 1,050 operating hours Absolute top condition Weight approx. 22to Working height approx. 31,8m Platform height approx. 29,8m Horizontal reach approx. 21,60m Maximum load capacity 250 kg 4-wheel drive and steering, swing axle 3 steering modes, front wheel steering, rear wheel steering, all-wheel steering, crab gear. Differential locks Platform dimensions 2,44x0,91m Length in basic position 11.7m Width 2,53m Transport length 11.7m, then transport height 2.8m Transport length 8,9m, then transport height 3,75m Wheelbase 3,5m Ground clearance 38cm Travel speed 0.5-5 km/h All technical information to the best of our knowledge, but without guarantee! Special price

; Gross weight [kg]: 1730; Inspection Date: 22023-11-06; Amount of previous owners: 1; Lift height[mm]: 618; Maximum lift capacity [kg]: 350

; Gross weight [kg]: 1655; Lift height[mm]: 620; Maximum lift capacity [kg]: 350

Used scissor lift Int. Art. Ref. m3459 Manufacturer: Haulotte Type Compact 8 Year of construction 2007 Batteries approx. 1.5 years old Dimensions (L x W x H): 250 x 80 x 200 cm Weight: 1.730 KG Operating hours: approx. 380 h Propulsion: Electric Platform height: 6.2 meters Working height: 8.2 meter Platform dimensions: 230x80 cm Expandable platform: 92 cm Max. platform load: 350 KG With intergr. Charger Location: 59425 Unna The machine can be viewed and tried out. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge  ...

pressure: 63 t stroke: 6-60 mm no. of strokes: 90-550 Hub/min : 300 mm table surface area: 780x600 mm ram surface: 807x460 mm tool hole in ram: Ø 40 mm total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2900x2000x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used

; Gross weight [kg]: 2630; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300

; Gross weight [kg]: 2330; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 814; Maximum lift capacity [kg]: 450

; Gross weight [kg]: 2150; Inspection Date: 2024-02-28; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 2760; Rear tyres remaining: 100; Front tyres remaining: 100; Inspection Date: 2023-09-29; Maximum lift capacity [kg]: 200

; Gross weight [kg]: 7040; Inspection Date: 2024-01-02; Amount of previous owners: 1; Maximum lift capacity [kg]: 230

; Gross weight [kg]: 6600; Inspection Date: 2024-01-20; Amount of previous owners: 1; Maximum lift capacity [kg]: 250

Haulotte HA16RTJ PRO!Year of construction 2018Operating hours 1028 hCE certificate available!TOP machine with pendulum axle, endless rotation of the upper carriage and 4 wheel steeringWorking height 16 mPlatform height 14 mMaximum range 8.3 mArticulation point 7.65 mMaximum load capacity 230 kg (2 pers.)Platform dimensions 1.83 x 0.80 mLength in basic position 6.75 mWidth 2.3 mHeight when retracted 2.3 mVertical swivel range of the basket arm 140° (- 80° / + 60°)Platform swivel range 165° (- 75° / + 90°)Swivel range of the superstructure 360° continuousOverhang 10 cmWheelbase 2.1 mGround clearance 37 cmInclination 5°Driving speed 5.2 km/hMaximum climbing ability 40%Turning radius - outside 3.75 mMotor Kubota 18.5 kW (Stage 5 in EU)Total weight 6,540 kgTransport length 5.05 mTransport height 2.4 mOff-road tires made of solid material 830 x 285 mmMaximum wind speed 45 km/hMachine d ...

HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012

Haulotte Compact 12 DX work platformPresenter with few hoursYear of construction 2022Operating hours: 177hRaises, lowers and drivesCE certificate available!Working height 12.06 mPlatform height 10.06 mMaximum load capacity 450 kg (3 pers.)Boom load capacity 150 kgNumber of extensions 1Platform length 2.45 mPlatform length with extension 3.7 mPlatform extension 1.2 mPlatform width 1.45 mPlatform dimensions - extended 3.7 x 1.45 mTransport height 1.7 mHeight when retracted 2.56 mWidth 1.78 mLength 3.18 mWheelbase 1.84 mGround clearance 28 cmDriving speed 0.6 - 5.5 km/hCan be moved at a maximum height of up to 8.15 mMaximum climbing ability 40%Inclinometer 3 °Raising and lowering time 35 s / 51 sTurning radius - outside 3.5 mTires - foam filled 26 x 12 - 16.5Engine Kubota, 18.5 kW (Stage 5 in EU)Hydraulic oil tank capacity 75 lTotal weight 3965 kgMachine works well!

pressure:040 t stroke:8 - 50 mm no. of strokes:50 - 300 /min distance between columns:600 mm distance table/ram, max. stroke up, adjustment up:285 mm table surface area:590 x 500 mm hole in the table:590 x 40 - 100 mm table height over floor:860 mm column travel -side:280 mm ram surface:590 x 380 mm ram adjustment:80 mm material width of feeder:150 mm power requirement:7,5 kW clutch:pneumatic ram adjustment:motoric pincer feed:mechanical

pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

According to the description below

Maximum Diameter: 2000 mm // Number Of Belts: 14

Description conveyor profiles power engine kw 0,18 length mm 3100 width mm 70 regolabile

Haul-off-saw combination, used Manufacturer: BLAKE Type: 302-1100-140 Year of construction: 1993 Haul-off force: approx. 10,000 N Pad width: 120 mm Effective contact length: 1100 mm Haul-off speed: approx. 0.5 – 10.0 m/min. Caterpillar clamping: pneumatic Drive motor haul-off: approx. 3.5 kW Drive motor saw: approx. 1.5 kW Profile cross-section: approx. 140 x 60 mm

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

Haul-off and saw combination, consisting of: 1 x Caterpillar haul-off Manufacturer: Battenfeld Type: P250-SX-2400 Year of construction: 1992 Contact length, effective: 2200 mm Pad width: 250 mm Haul-off force, max.: approx. 30,000 N Speed: max. 8.0 m/min. Connected load: approx. 6.0 kW 1 x Saw Manufacturer: Battenfeld Type: SPR-125 Year of construction: 1992 Profile cross-section, max.:230 x 90 mm or 160 x 110 mm Pipe diameter: max. 125 mm Saw blade diameter: 420 mm Travel distance:1000 mm Working speed: max. 20 m/min. Cutting capacity: 15 cuts/min. Saw motor: approx. 1.5 kW

Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.

Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...

PE/PP thick Sheet/board extrusion line Capable to produce ABA multilayer sheet extrusion thickness from 3 to 30 mm Widthness 1500 mm Extuders; JWS D/L=150/35 vented single screw extruder and D/L=JWS 90/35 vented single screw extruder, Hydraulic screen exchanger, ABA Distributor, 3 roller calendars (ODXL=700X2100 mm) with Fully oil temperature controlled, 10 pieces of cooling rollers with drive and cooling water units, 5 rolls temperature controlling system with drive, Cooling bracket (Cast aluminum) and lamination unit, tunnel anneal oven, First Haul off unit, Cooling bracket (Cast aluminum), Second haul off unit, Film coating system, Length and Transverse cutter, Belt conveyor, electricity control all of electrical, electronic and mechanical components were chosen from named company brands. (Servo motors from Yaskawa brand-Japan, PLC-Siemens S7-200, screen-SiemensMP277, breake ...

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

Description Complete multilayer Pex-Al-Pex pipes production line Main extruder Cincinnati Proton 45-30G Co-extruder Cincinnati CE-30 Cooling tank Cincinnati Sprayon 63T/5,8/3k Vacuum tank Cincinnati Vacon 63T/5,8/3k Haul-off Cincinnati Tracton 63/1C-6 Aluminum welder Leicht WIG-120 Aluminum unwinder AMT AH1,0/1700 Chiller HYFRA VWK30-1-S Aluminum pipe welder AIXCON PWU 400 Stockpile for raw aluminum, forming aluminum pipe, welding aluminum pipe UNIWEMA 30 KMW Generator for welder Huttinger BIG 40/100 Coating extrduer Cincinnati Proton 45-30G Glue co-extruder Cincinnati CE-30 Cooling tank Sider Jack Cooling tank Cincinnati Sprayon 63T/5,8/3k Haul-off Cincinnati RAE 63/1 X1 Marking machine IMAJE 9040 X ray gauge x SCITEQ X-ACT TWINEYE 40 Automatic winder FB Balzanelli TR1350 L1/8/M

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.

2 injection molding machines BATTENFELD HM 65/210 The injection molding machines are fully operational, they are constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 52,000. The price is for one injection molding machine.

PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set

EXTRUSION LINES FOR SPIRAL PE PIPES / 300/1200 Max. diameter: 1200mm Min. diameter: 300 mm Diameter pipes D 300,400,500,600,700,800.900.1000,1200.SN4 and SN8 EXTRUDER/...1 Manufacturer/ Top Industri China Model/ D.65 Year/ 2007 Serial no./ No.1234 Screw diameter/ 65 Screw L/D ratio/ 33 Output capacity/ (kg/h) 250 Main drive power/r (kW) 50 Screen changer/ (YES/NO) No Co-extrud (YES/NO) No Running hours/ DIE HEAD Manufacturer/Fabricante Top Industri China Model/Modelo K2 Year/año 2007 Serial no./ No.1234 Extrusion tools and calibration tools A total of 8 sets of tools for extrusion and calibration of a square profile CALIBRATION TANK/ YES Manufacturer/ Top Industri China Model/lo Top Industri China 6000 Year/ 2007 Serial no./ No.1111 Pipe range diameter/ square profile No Vacuum pump/ 4kw Length/ 6000 COOLING TANK/ YES Number/ 1 Manufacturer/ Top ...

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA Year of production 2018 1. Extruder A – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 2. Extruder B – Single screw extruder 7530/LHE - Screw diameter 75 mm - L/D ratio 30/1 - Extruder drive – 118 kW AC - Nominal output in LDPE MFI 1.0 275 kg/h - Lever type screen changer 3. Extruder C – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm 5. Internal bubble cooling system - Introduction air fan 7,5 kW with heat exchanger battery - Extraction air fan 7.5 kW - ...