hard used for sale

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2007 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, not on stock

- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2003 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock

- Producer Cefla / Sorbini - Type T / 20-SP-1 - Year of construction 1997 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 174 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1640 mm - Width 2590 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 4,5 kW - Weight 2.000 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, not on stock

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Cutter head, milling adapter, hard metal milling cutter, indexable insert milling cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Inserts: hard metal -Adjustment: SK50 -Weight: 4.5 kg

Industrial PC, with keyboard SIEMENS SIMATIC Rack PC 547B 6AG4104-0CG12-0XX0 Removable hard drive rack with three hard drives: WESTERN DIGITAL WD1600YS ( 160 GB ) LG Super-Multi DVD Burner with SecurDisc Keyboard: CHERRY ML4400 G84-4400LPBDE-0 110 - 127 V AC, 60 Hz, 7.0 A, 200 - 240 V AC, 50 Hz, 3.5 A Setup: 19-Rack used, tested ! Dimensions: 480 x 490 x 175 mm

Hommel Dura Measuring Plate / Control Plate made of Natural Hard Rock Hommel Dura Hard Rock Measuring Plate (Granite Plate) Length: 3000 mm Width: 1000 mm Thickness: 300 mm 1 x T-slot You can find more measuring plates in other sizes - new and used - in our shop! International shipping costs on request!

The machine is used in the pharmaceutical, chemical, metallurgical and food industries. Used as specialized material crushing equipment in the preparation process, it can crush hard and durable materials such as plastics. Working method The material is fed into the crushing chamber via the hopper; crushed by simultaneous cutting of fixed and movable knives and rotary knife impact; flows to the outlet automatically under the influence of a rotating centrifugal force. Mainly used for primary crushing or first processing of large size hard raw material. Constructed of SS304 stainless steel, meets the GMP standard

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th spindle t ...

: neu : 2022 : 2481 : prompt, Zwischenverkauf v : 2130 € : 1917 € : 1 : 2000 x 1000 mm : 850 mm : 450 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjust ...

: neu : 2513 : Februar 2024, Zwischenver : 6998 € : 6298.2 € : 130.37 € : 3000 x 1500 mm : 850 mm : 8000 kg : 1544 kg : 200 mm : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Differ ...

: neu : 2023 : 2499 : prompt, Zwischenverkauf v : 3091 € : 2781.9 € : 1 : 1500 x 1000 mm : 850 mm : 8000 kg : 541 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot va ...

: neu : ca. 6-8 Wochen ab Auftrag : 10805 € : 9724.5 € : 201.3 € : 4000 x 2000 mm : 850 mm : 8000 kg : 712 kg : 200 mm : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot ...

: neu : ca. 6-8 Wochen ab Auftrag : 1367 € : 1230.3 € : 1000 x 1000 mm : 850 mm : 450 kg : 25 mm : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and ...

: neu : 2515 : Februar 2024, Zwischenver : 4699 € : 4229.1 € : 2400 x 1200 mm : 850 mm : 8000 kg : 945 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants avail ...

: neu : ca. 6-8 Wochen ab Auftrag : 1634 € : 1470.6 € : 1500 x 1000 mm : 850 mm : 344 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with ca ...

: neu : 2023 : 2492 : prompt, Zwischenverkauf v : 3652 € : 3286.8 € : 1 : 2000 x 1000 mm : 850 mm : 8000 kg : 712 kg : 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot var ...

Klebebinder mit Vorsatzanleger / Perfect Binder Kolbus Ratiobinder KM 470 with endsheet feeder Baujahr 1988/1995 Kolbus Ratiobinder KM470 23 Zagne Format / Size min 125 x 100 x 3mm / max 460 x 310 x 60mm Buchblockdicke min. 3mm - max. 60mm Aussattung / Consist of: Zusammentragmschine / Gatherer ZU 803 32 Stations Links- und Rechtslauf / Left and right side Criss-Cross Auslage / Criss-Cross delivery Anleger Vor- & Nachsatz fuer Hardcoverproduktion / Feeder for endsheet hard cover production Handanleger / Hand fed station Ratiobinder KM 470 mit 25 Zangen / Ratiobinder KM 470 with 25 Clamps PUR Rueckenleimwerk / PUR spine gluing unit Hotmelt spine gluing unit PUR-, Hotmelt- und Dispersionsklebebindung / PUR, Hotmelt and dispersion glue binding Seitenbeleimung Heissleim / Hotmelt side gluing unit Faelzelstation / Back Lining station Buchblock- und Ganzpresse FM 405 fuer fadengeheftete Bu ...

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

Machine designed for machining solid wood doors with frame and raised panels Workpiece dimensions Length 150 - 3000 mm Width 40 - 300 mm Thickness 20 - 60 mm Material: hard woods/soft woods Machine equiped with 2 working areas, including - 3 NC-axes X, Y, Z - telephone modem - 1 sawing unit - 1 horizontal boring unit - distance horizontal drill above table (Z):max. 40 mm - fixed workpiece table - central lubrication - CE package - max. workpiece length 2.400 mm KOCH Numeric with 3 NC-axes Positioning control with PC Pentium CPU Operating system Windows XP Professional: english 15? Touchpanel VGA + Touchscreen by means of LVDS connection USB-connection on PC and on Touchpanel Seriel and parallel interface on the PC Hard disk 2,5? Input of machine commands and motor control through the Touchpanel PS2 connection for external keyboard Office PC software Stretched machine bas for max. workp ...

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Oelze, granite measuring plate, hard stone measuring plate -Size: 600x400x80mm -Weight: 61 kg

Bread slicer, make WABAMA, Model ECONOMY Plus 450, year 2009, Cutting capacity: up to 200 cuts/min, cutting thickness: 4 - 26 mm,, for bread lengths up to max. 450 mm, cross-section: 200 x 150 mm (WxH), Sensor – technology for measuring the panes,, Product holder (multi-tooth gripper), dimensions: 1,130 x 740 x 1,200 mm, use: The machine is versatile and is usually used for the automatic cutting of all soft and hard breads such as: tea and toast breads, multigrain breads, hard-crust double baked breads as well as Christmas stollen and English fruit cake. A fresh bread - cut is usually already possible when warm. Due to the low-noise and vibration-free operation, the machine is ideal for installation in shop fittings., construction/ function: The WABÄMA bread slicer has an extremely stable and resilient construction completely in V2A Nirosta stainless steel. The machine is equipped wit ...

Description: Control voltage on: 35'849 h Main spindle BE1: 23749 h Boring head BE1: 3709 h Drill head: 17 spindles Main spindle: 18.5 kW controlled Chain changer 30-fold HSK F63 Speed range 0-18'000 rpm Drilling head 35 spindles vertical, for automatic changing into the main spindle Control system was converted in 2014: RECHNER IPC 5.11.0.0 WITH DVD, Industrial PC IPC 5.11 from Eltec with Windows XP operating system, hardware: Industrial PC Intel Core 2 Duo E8400 3.0 GHZ, working memory 4 GB RAM, 2 COM interfaces RS232, internal DVD-ROM drive, 1 fixed hard disk with 250 GB, 1 USB hard disk for data backup, 4 USB ports, Ethernet network connection with EC Declaration of Conformity Series no. 0-201-19-1527 without tools or units and without vacuum pump ( central vacuum system ) Translated with DeepL.com (free version) working width y-axis: 1,600 mm, working height z-axis: 950 mm, work ...

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

Horizontal batch mixer with 630 l. gross capacity, pneumatically operated discharge gate (new cylinder), 37 kW drive, Flender gearbox (N2 = 58,58 RPM) and hard metal plated mixing tools. Refurbished in 2016, very good condition.

Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009

Thread cutting: M3 - M27 Speed: 70/220 rpm Working radius: 300 - 1900 mm Construction parallel arm: Stable arm structure made of hard aluminium profile (58x40) Weight: 39 kg Zubehoer: 6 slip couplings of your choice

Thread cutting of M 3 - M 12 - Speed: 400 rpm. Air demand/pressure: 750 l/min. 6-7 bar Working range (extension) 300 - 1900 mm Construction parallel arm: Stable arm structure made of hard aluminium profile (38 x 29) Weight: 23 kg Adapter recording: TCS 1B incl. 6 TCS1B safety slip couplings of your choice

Thread cutting: M 3 - M 16 Speed: 300 rpm Working radius: 200 - 1900 mm Air requirement/pressure 950 l/min 6 - 7 bar Construction parallel arm: Stable arm structure made of hard aluminium profile (38 x 29) Adapter recording TCS 2 B Weight: 27 kg incl. 6 slip couplings

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

Thread cutting of M 4 - M 22 Working radius 300 - 1900 mm Speed: 120/300 rpm Air demand/pressure: 950 l/min 6-7 bar Construction parallel arm: Stable arm structure made of hard aluminium profile (58 x 40) Weight: 39 kg incl. 6 safety slip couplings of your choice

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Fine impactor, opening: approx. 1,000 x 700 mm, with inlet and outlet box, semimobile on steel skids, for soft and medium hard rock, construction year estimated

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass).

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

1 x Farrel model F80 banbury internal mixer, Serial number: 996006, Year of manufacture: 1999 (new), Chamber volume 80litre, With 4 wing ST rotors, pneumatic hopper, hydraulic drop door dicharge with Linear actuator and spade latch, FYH hydraulic dust stops, Unidrive gearbox, With 600 HP DC variable speed motor and drive/SCR controller, Complete with hydraulic unit, Lubrication system, 3 Zone TCU and Farrel series 2000 operator panel. High spec mixer (fully hard chrome plated chamber and rotors). Previously used for PVC.

MicroStep CNC guide machine AQUACUT 3001.15 W working area (3000mm x 1500 mm) high pressure pump: KMT Streamline Pro I 60 S, 6200 bar cutting up to 300mm only 4 000 operating hours Including osmosis water treatment system (12,000,- Euro) The AQUACUT is a robust and very practical CNC guide machine in portal construction, specially developed for continuous use in water jet cutting. The high dynamics of the system are overpowered by a low-set machine portal, digital DC servo motors with play-free transmission and practical, stainless linear guides in all three axes. In combination with an HD pump, the AQUACUT can be used to cut solid metals, hard rock, marble, armoured glass, ceramics, plastics, corrugated board, foams, as well as composite materials. assembly and commissioning on request. ; ready for immediate use

1 x Farrel Pomini model F160 Banbury internal mixer, Original year of manufacture: 1980, but rebuilt in 2000 (very good condition), Chamber volume: 160L Net batch size: 120kg, With 2 wing type rotors, Rotor tips hard material coated and fully chrome plated Rotor speed max 50rpm, pneumatic hopper, hydraulic drop door, FYH dust seals, Unidrive gearbox, With 435kw DC variable speed motor and electrical controls (415V). Complete and in good condition.

High intensity mixer with horizontally aligned mixing pan, 1.500 l. net capacity, with 45 kW agitator (star-type, 16 knives in 8 layers, 455 RPM), 2 x 11 kW mixing star drive, 15 kW pan drive and 3 kW hydraulics aggregate for automatic discharge gate. Pan lined with C-steel, hard metal wall-bottom-scraper, shovels made of wear-resistant platic. Mixer has been fully refurbished in 2005; in good overall condition.

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

Extruder with vacuum pre-press LVP-35, gearbox refurbished in 2011, extrusion helix plated with hard metal bits. Press is equipped with a 60 kW DC drive (can be replaced by a 55 kW AC drive at anextra charge). The machine is test-run and comes with spare parts.

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping