hard used for sale

Hard rock slab, granite slab, granite blockHard stone block, angle block precisely machined on all sidesMeasuring cube, measuring plateLength: 1590 mmWidth: 300 mmHeight: 470 mm- 2 holes 80 mm- 2 holes 120 mm- Threaded bushings mainly M16, some with M12 and M18Weight: 570 kgGood condition; used

Hard stone slab, granite slab, granite block, measuring cubeHard stone block, angle block precisely machined on all sidesThe granite slab comes from a measuring machineDimensions of the large table surface L x W x H: 1350 x 1000 x 300 mmDimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of base blocks with leveling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm)- 4 pieces of threaded bushings M16- small chipping on eggs Top edgeOverall dimensions L x W x H: 1350 x 1350 x 300

150,000 litres of V2A horizontal hard water/soft water tank Properties: Volume 150000 L Material V2A (AISI 304) 1.4301 Total height 4200 mm Inner diameter 3600 mm Overall length 13500 mm Cylinder length 12000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Description: Tank 1/2 - hard water tank Tank 2/2 - Soft water tank Tank crest: Ventilation nozzle Filling nozzle 2 CIP balls In front: Cone base Manhole 450 x 350 mm oval Residual drain with flanges with disc valve Thermometry Tank body: Reinforcement rings Behind: Cone base

Hardness Tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Approx. space requirement: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

BIG SUN heavy-duty bucket 210 cm with Hardox cutting edge, - with Liebherr 506 recording

Hardening furnace G+H

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

x-travel: 550 mm y-travel: 400 mm z-travel: 360 mm b-axis: +/- 110 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 530 spindle taper: HSK63 spindle turning speed - stepless: 20000 U/min tools in tool magazin: 48 weight of the machine ca.: 10 t dimensions of the machine ca.: 3 x 5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos -Total dimensions: 1200/700/H1730 mm -Weight: 256 kg

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

Rebord (Samed) Darix 46/100 semiautomatic casemaker year 2015 Size max. 46 x 100cm hot melt gluing weight 800 kg good condition

A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible.

High: 479 mm, Long: 832 mm, Width: 408 mm, Distance between points: 405 mm, Specification: Measuring a horizontal coordinate

1 semi-hard cheese dairy plant for non-pressed semi-hard cheese such as Tilsiter cheese Moulds and drain tables for approx. 55,000 l of cheese dairy milk per shift are available with 1 cheese curd - whey rotary drum de-whey with 10 curd melting vats, space for a total of 10 cheese curds. 1,150 Performa cheese bread molds

Specification: Rolling and sound

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: RAUHEIS Hommel TKLT 1000 : ja weight of the machine ca.: 200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brinell hardness: . rockwell hardness: . throat: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT   heating method: induction DIMENSIONS / WEIGHTS   space requirements -left/right-: 8044 mm   space requirements -front/back-: 8046 mm   total height: 4000 mm ELECTRICAL SPECIFICATIONS   mains power supply: 624 kVA Power Data: Mains connection power: 624 kVA Mains voltage: 400 V Rated current: 900 A Mains frequency: 50 Hz Transformer: Power: 560 kVA Voltage: 400 / 580 V Current: 809 / 558 A Frequency: 50 Hz Converter: Power: 552 kVA / 450 kW Voltage: 750 V Current: 667 A Frequency: 6 – 10 kHz Starting: Power: 50 kW Voltage: 400 V Current: 90 A Frequency: 50 Hz Auxiliary Equipment: Voltage: 400 V Current: 25 A Frequency: 50 Hz Control Voltage: Voltage: 230 / 24 V Current: 5 / 40 A Frequency: 50 Hz / DC Automation KUKA Roboter

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brinell hardness: - rockwell hardness: - throat: - mm weight of the machine ca.: - t dimensions of the machine ca.: - m sclerometer Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: 1150 ° muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mm total power requirement: 3 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,8 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MARENO EVO10X ist ein Härteofen/Trockenofen für Präzision, hohe Genauigkeit und Zuverlässigkeit. Nutzraum: B350 x H600 x T600 mm. Technische Daten: Max. Temperatur 270 °C; installierte Leistung 16 kW; Anschluss 50 Hz 3x 400 V; Außenmaße L1000 x B800 x H1800 mm. Ermöglicht kontrollierte Wärmezyklen zur Erzielung enger Toleranzen; Einsatzbereiche: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Werkzeugmaschinenbau. Technische Daten ohne Gewähr

DE NABERTHERM N 4000/60HAS ist ein Umluftofen für Wärmebehandlungen mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Nutzraum 1300×1000×2000 mm (4000 l), Ladegewicht max. 3000 kg. 400–600 °C (max. 600 °C); Ventilator 9000 m3/h; Heizleistung 60 kW; install. Leistung 70 kW; Anschluss 3×400 V 50 Hz; Außenmaße 3700×2700×3100 mm. Zubehör: Wasserabschreckbad 2500 l, Zustandsleuchte. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SAFED NIT 17 ist ein Härteofen hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit bei Wärmebehandlungen. Maximale Temperatur 1000 °C. Heizleistung 7 kW; Gesamtinstallierte Leistung 28 kW; Anschluss 50 Hz, 3x 380 V. Maschinengewicht ca. 600 kg; Abmessungen L×B×H 5800×1200×1800 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft- und Raumfahrt, Medizintechnik, Werkzeugbau, Uhrenindustrie. Technische Daten ohne Gewähr

SOLO 221-15/25 ist ein Anlassofen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Volumen 4,5 l; maximale Temperatur 650 °C, geeignet für Wärmebehandlungen kleiner bis mittlerer Werkstücke. Technische Daten: installierte Leistung 4 kW; Anschluss 50 Hz, 3x 400 Volt. Ermöglicht enge thermische Toleranzen und ist geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

SAFED 6SGR50/70 ist ein Härteofen, ausgelegt für präzise, hochgenaue und zuverlässige Härteprozesse. Maximale Temperatur: 650 °C. Anschluss: 50 Hz, 3x 400 Volt; Anschlussleistung: 3.5 kW. Entwickelt für konstante und reproduzierbare Wärmebehandlungen; geeignet für Automotive, Luftfahrt, Werkzeugbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

x-travel: 800 mm y-travel: 900 mm z-travel: 620 mm b-axis: +/- 120 ° c-axis: 360 ° 0 Control: HEIDENHAIN iTNC 640 spindle taper: HSK 63 spindle turning speed - stepless: 15000 U/min tools in tool magazin: 64 total power requirement: 10/17 kW weight of the machine ca.: 21.5 t dimensions of the machine ca.: 3 x 4.5 x 3.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lever-type measuring device, dial gauge, probe, centering device, 3D probe, probe insert for hardness tester, hardness measuring machine, hardness tester, universal hardness testing machine, Rockwell hardness tester -Spare part: Rockwell dial gauge for hardness tester type Testor HT -Diameter: 130 mm -Height: 50 mm -Weight: 0.6 kg

rockwell hardness: . brinell hardness: . weight: kg dimensions: mm Hardness tester Rockwell measurement with underframe table all technical data without guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NABERTHERM N 41 Hardening Furnace Manufacturer NABERTHERM Model N 41 Year 1990 Condition untested Location 72589 Westerheim DE Lot 74

CONTROLS   CNC controls SIEMENS 840 D SL HEAT TREATMENT COMPARTMENT / ZONE   length: 1000 mm   diameter: 36 mm HEAT TREATMENT COMPARTMENT / ZONE   heat treatment process: tempering   length: 1000 mm   diameter: 36 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 6700 mm   space requirements -front/back-: 7500 mm   total height: 3750 mm   total weight approx.: 20000 kg ELECTRICAL SPECIFICATIONS   total power consumption: 860 kW Accessories: e. g. base plate, exhaust system, tools, ... Operating hours: 7760 type stations / number: hardening 1x - Tempering 1x The machine is sold without workpiece programs.

Additional technical specifications: • Diameter of storage surface: 50 mm • Incl. digital display • Incl. table booklet for hardness tests • with workbench

SOLO 8004 ist ein Härteofen mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Durchmesser bis 130 mm. Haupttechnische Daten: maximale Temperatur 1150 °C, Heizleistung 3,5 kW, Anschluss 50 Hz 3x 380 V; Außenmaße L800 × B600 × H600 mm. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Uhrenbau, Werkzeugmaschinen und Medizintechnik. Technische Daten ohne Gewähr

1 set of 4 pcs. Rim 24XDW16L IS 40 Profile:25mm A tire has a defect that is marked in red in the picture. Auction-ID: A1-50849-507

1 set of 4 pcs. Rim 24XDW14L IS 45 Profile: 90% Auction-ID: A1-50849-524

Technical details Type: Die-cast industrial components Material: Pressure die-cast aluminium alloy (likely) Configuration: - Precision die-cast components - Reinforced ribbed construction - Machined mounting faces - Multiple fixing holes - Uniform production batches Casting markings: - 211.2 - PO 9007 Quantity: Approx. 700–1100 pieces Packaging: - Multiple cardboard cartons Application: - Industrial machinery - Mechanical assemblies - Automation equipment - Machine frame connections - Mounting brackets and housing components Construction: - High-pressure die casting - Precision-machined functional surfaces Dimensions (per component): - Length: Approx. 130 mm - Width: Approx. 45 mm - Height: Approx. 35 mm Weight: Approx. 0.45 kg per component Condition: New old stock (unused) Observed condition: - Uniform finish throughout - No corrosion or wear visible  ...

Measuring range HLD (170-960), Measuring direction 360°, Hardness scale: Standard Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore Hardness (HL, HB, HRB, HRC, HRA, HV, HS), in anti-shock carrying case. CE certified. Machine condition: unchecked. Approx. Transport dimension: LxWxH 130 x 260 x 330 mm; Approx. Weight: 4kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-537

Only the instrument itself, the associated folder and the enclosed five sample holders are part of the auction. The last calibration certificate from 27.05.2025 is also enclosed. Auction-ID: A1-51071-27

Measuring range HLD (170-960), Measuring direction 360°, Hardness scale: Standard Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore Hardness (HL, HB, HRB, HRC, HRA, HV, HS), in anti-shock carrying case. CE certified. Machine condition: unchecked. Approx. Transport dimension: LxWxH 130 x 260 x 330 mm; Approx. Weight: 4kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-541

USED HARDINGE GT-CE CNC LATHE Serial No.: GT-753-B Main spindle Bar diameter: 27 mm Diameter above bed: 300 mm Spindle nose: A2-4 Spindle power: 3.7 kW Spindle speed: 60-6000 rpm Axle travel: X=281 mm - Z=304 mm Equipped with 1 FANUC 18-T CNC Dimensions and weight 1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

Measuring range HLD (170-960), Measuring direction 360°, Hardness scale: Standard Leeb, Brinell, Rockwell A, Rockwell B, Rockwell C, Vickers, Shore Hardness (HL, HB, HRB, HRC, HRA, HV, HS), in anti-shock carrying case. CE certified. With printer Machine condition: unchecked. Approx. Transport dimension: LxWxH 300 x 140 x 370 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-553